Can I hang a TV on a steel-framed wall?

Only with backing built in. You cannot trust a heavy fixing into a steel stud web. Tell us before the wall closes and we add backing plates or blocking — there is no fallback of hitting a stud like there is in wood.

Do you stand behind your framing work in Carlton?

Yes. We check every Carlton layout is square before we hand it off, and if something is not right we come back and make it right.

Do you coordinate Carlton framing with electricians and plumbers?

Yes — trades rough in cleanly because the Carlton framing is sequenced for them, ahead of insulation and drywall.

Does a steel wall count as fire-rated?

No. Steel is non-combustible, which is why it appears in many rated assemblies, but a rating comes from the whole specified system — stud spacing, board type, layers and joint treatment. We build to the assembly on the drawings.

Can you coordinate with my Carlton electrician and plumber?

Yes — we sequence Albany, Athlone, Baranow framing so your other trades can rough in cleanly before insulation and drywall go on.

Metal Stud Framing Carlton Edmonton | Steel Studs

Steel stud partitions in Carlton for basements and shops

A finished Carlton space is only as straight as the frame beneath it. In Carlton we build steel-stud partition walls, bulkheads and basement layouts — squared, plumbed and spaced to the drywall spec you need. Carlton is an older Northwest community where settling cracks, aging texture and the occasional plaster repair come up, so framing calls here often include repairs where original framing has shifted or been altered over the years, alongside basement development. We cover Carlton, Albany, Athlone, Baranow and Northwest, 7 days a week.

Bulkheads and soffits for ductwork and lighting
Carlton track and stud spacing set to code for the drywall going over it
To-spec door and window openings in every Carlton frame
Albany, Athlone, Baranow door and window rough openings framed to spec
Track and stud layout to code — the base for Carlton board
Albany, Athlone, Baranow track and stud spacing set to code for the drywall going over it
Spacing to code on Carlton track and studs so the drywall lands right

What affects the cost of metal stud framing in Carlton in Edmonton?

Wall length, height and layout complexity

The cost of steel-stud framing in Carlton tracks the total wall length and height, the number of openings and bulkheads, and how complex the layout is. We price off the plan or a site walk-through.

Typical framing work in Carlton

Framing calls range from straightforward basement layouts in the newer homes to repair and alteration work in the older ones nearby.

Carlton drywall in context

About Carlton

Carlton is named after Fort Carlton There are several natural areas within the neighbourhood, including a woodlot containing indigenous species located in the northwestern portion of the neighbourhood.

What we see in Carlton

In Carlton the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We confirm what your home actually needs on site, in writing, before anything starts.

Our Carlton metal stud framing process in Edmonton, step by step

Layout first

We lay out track lines on the floor and ceiling from the plan or your walk-through direction, confirming every wall location before a single stud goes up in your Carlton space.

Frame square and plumb

We install track, cut and set the studs to spacing, and check every wall for square and plumb as we go — the framing stage is where a crooked wall gets built or avoided. See our basement drywall work in Carlton once the frame is up.

Common metal stud framing situations in Carlton in Edmonton

In Carlton, carlton sits in Edmonton's Northwest district. Carlton is named after Fort Carlton There are several natural areas within the neighbourhood, including a woodlot containing indigenous species located in the northwestern portion of the neighbourhood. Across roughly 1,820 homes here, the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We cover Carlton and the surrounding Northwest district, 7 days a week. One fixed price after an honest on-site look, and the job done right the first time.

Gauge, and why it is not all the same steel

Thickness matters

Interior non-load-bearing partitions use a lighter gauge than walls carrying weight or spanning tall. Using the lightest available everywhere gives walls that feel flimsy and telegraph movement.

What we specify

Gauge to suit the wall height and what the wall has to carry. In an Carlton basement with an 8-foot ceiling that is straightforward; a tall stairwell wall is not.

Our Carlton metal stud framing process in Edmonton, step by step

Layout first

We lay out track lines on the floor and ceiling from the plan or your walk-through direction, confirming every wall location before a single stud goes up in your Albany, Athlone, Baranow space.

Frame square and plumb

Cost, and when steel is actually cheaper

Material against labour

Steel is often competitive on material and can be faster to set out on a large straight run. On small, irregular Carlton jobs with lots of backing and odd angles, wood is usually quicker.

How we quote

We price the material that suits the job rather than defaulting, and tell you where the difference actually comes from.

How it works

Simple, clean, on schedule — Metal Stud Framing in Carlton Edmonton

Free quote

We come out to your Carlton Edmonton property, take a real look at the metal stud framing, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every metal stud framing quote in Carlton Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the metal stud framing in Carlton Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Carlton Edmonton home while we finish the metal stud framing to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished metal stud framing with us and you're happy with the result in Carlton Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the metal stud framing contractor Carlton Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your metal stud framing project in Carlton Edmonton.

Read our reviews on Google

FAQ — Metal Stud Framing Carlton Edmonton

Metal Stud Framing Carlton Edmonton: your questions answered

Can I hang a TV on a steel-framed wall?: Only with backing built in. You cannot trust a heavy fixing into a steel stud web. Tell us before the wall closes and we add backing plates or blocking — there is no fallback of hitting a stud like there is in wood.
Do you stand behind your framing work in Carlton?: Yes. We check every Carlton layout is square before we hand it off, and if something is not right we come back and make it right.
Do you coordinate Carlton framing with electricians and plumbers?: Yes — trades rough in cleanly because the Carlton framing is sequenced for them, ahead of insulation and drywall.
Does a steel wall count as fire-rated?: No. Steel is non-combustible, which is why it appears in many rated assemblies, but a rating comes from the whole specified system — stud spacing, board type, layers and joint treatment. We build to the assembly on the drawings.
Is steel framing more expensive?: Often competitive on material and faster to set out on a large straight run. On small irregular Carlton jobs with lots of backing and odd angles, wood is usually quicker and cheaper. We price what suits the job.
Can you coordinate with my Carlton electrician and plumber?: Yes — we sequence Albany, Athlone, Baranow framing so your other trades can rough in cleanly before insulation and drywall go on.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Framing

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Metal Stud Framing Carlton Edmonton

Steel stud partitions in Carlton for basements and shops