Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Batt and acoustic insulation in Southwest Edmonton before the board

Once Southwest Edmonton drywall closes, the insulation is invisible for good — so it has to be done right: complete fill, zero gaps or compression, vapour barrier where required. In Southwest Edmonton we install batt and acoustic insulation in walls and ceilings ahead of drywall. Southwest Edmonton is an Southwest Edmonton community with a mix of older homes and newer builds, so insulation calls here range from basement development in the newer homes to attic and wall upgrades in the older ones nearby. We cover Southwest Edmonton, Allard, Ambleside, Blackburne, Blackmud Creek, Callaghan, Cavanagh and Southwest Edmonton, 7 days a week.

Insulation Installation Southwest Edmonton

Watch insulation installation jobs in Southwest Edmonton on our YouTube channel

Sound as a secondary benefit

You get some of it free

Filling an interior Southwest Edmonton partition improves airborne sound between rooms noticeably, even when the job was about temperature.

Upgrading selectively

If a bedroom or office wall is open anyway, a denser acoustic or mineral wool batt in that specific cavity costs little extra. We point out which walls those are while quoting rather than pricing the whole house up.

Insulation Installation in every Southwest Edmonton community

Where we work in Southwest Edmonton

We cover insulation installation across Southwest Edmonton. Pick your community below for the detail that applies to your street.

Inspection, and being ready for it

Checked before it is covered

Insulation and vapour control in an Southwest Edmonton build are inspected before drywall covers them.

How we sequence

The work is left visible and boarding waits for the inspection rather than running ahead. Covering something an inspector needs to see costs a wall, not an afternoon, and it is the easiest scheduling mistake to avoid.

Basements, and why they are not like upper floors

Concrete changes everything

An Southwest Edmonton foundation wall is cold and can carry ground moisture. Insulation pressed straight against it sits where moisture cannot dry.

The right assembly

The framing is held off the concrete or a rigid layer goes on first, so the cavity insulation stays on the warm side. Getting the order wrong is the usual reason a finished basement smells musty in year two.

Insulation for basements and sound control in Southwest Edmonton

Basement development

Basement walls and ceilings in Southwest Edmonton need insulation to code before drywall — we install batt to the required R-value along with vapour barrier on exterior walls.

Acoustic insulation for sound control

Acoustic batt inside a wall cavity is a core part of a real sound-dampening assembly, paired with resilient channel and sound board.

Rim joists and the coldest band in the house

Small area, big loss

The rim joist where the floor framing meets the foundation is thin, directly exposed and usually the worst-performing part of an Southwest Edmonton basement.

Sealed then insulated

The joint gets air-sealed first, then insulated. A batt tucked loosely against a bare rim joist can trap moist air against cold wood, which is worse than leaving it alone.

Insulation for basements and sound control in Allard, Ambleside, Blackburne, Blackmud Creek, Callaghan, Cavanagh

Basement development

Basement walls and ceilings in Allard, Ambleside, Blackburne, Blackmud Creek, Callaghan, Cavanagh need insulation to code before drywall — we install batt to the required R-value along with vapour barrier on exterior walls.

Acoustic insulation for sound control

Acoustic batt inside a wall cavity is a core part of a real sound-dampening assembly, paired with resilient channel and sound board.

Simple, clean, on schedule — Insulation Installation in Southwest Edmonton

1

Free quote

We come out to your Southwest Edmonton property, take a real look at the insulation installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every insulation installation quote in Southwest Edmonton starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the insulation installation in Southwest Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your Southwest Edmonton home while we finish the insulation installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished insulation installation with us and you're happy with the result in Southwest Edmonton. If anything needs a second look, we handle it before we call the job done.

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the insulation installation contractor Southwest Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your insulation installation project in Southwest Edmonton.

Read our reviews on Google

Insulation Installation Southwest Edmonton: your questions answered

Do you also do the drywall after insulation in Southwest Edmonton?
Yes — we insulate and drywall Southwest Edmonton projects as one job, or insulate only ahead of your own crew.
Is insulation enough on its own?
No. It slows heat conduction but does nothing to stop air moving through gaps, and in an Alberta winter that air carries heat and moisture. A full cavity behind an unsealed top plate performs far below its rating.
Do you install vapour barrier too in Allard, Ambleside, Blackburne, Blackmud Creek, Callaghan, Cavanagh?
Yes — when an Allard, Ambleside, Blackburne, Blackmud Creek, Callaghan, Cavanagh assembly needs it, we install and seal the vapour barrier before any drywall.
Can insulation go straight against the concrete?
No. That puts it where moisture cannot dry. The framing is held off the concrete or a rigid layer goes on first so the cavity insulation stays on the warm side. Getting that wrong is why finished basements smell musty.
Is sound-control insulation available for Allard, Ambleside, Blackburne, Blackmud Creek, Callaghan, Cavanagh walls?
Yes — Allard, Ambleside, Blackburne, Blackmud Creek, Callaghan, Cavanagh soundproofing assemblies pair cavity acoustic batt with channel and sound board.
Do you insulate basement developments to code in Southwest Edmonton?
Yes — we install batt and vapour barrier to the R-value your Southwest Edmonton basement development requires. We also cover Allard, Ambleside, Blackburne, Blackmud Creek, Callaghan, Cavanagh and Southwest Edmonton.

Need Edmonton’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Edmonton →
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote

Insulation Installation in every Southwest Edmonton community

See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook