Can you take out this wall?

Only once we know it is not load-bearing, and that needs drawings or an engineer rather than an assumption. If it is bearing, the job becomes beams and posts — far better priced before demolition than discovered during it.

Can the same crew do the drywall after framing in Leger?

Yes — one crew frames, boards, tapes and finishes, so nothing gets lost in a handoff between trades.

Do you frame basement developments in Leger?

Yes — wood-frame basement layouts ready for drywall are our most common framing job. We also cover Aspen Gardens, Bearspaw, Blue Quill and Whitemud.

Do you frame basement developments in Leger?

Yes — wood-frame basement layouts ready for drywall are our most common framing job. We also cover Aspen Gardens, Bearspaw, Blue Quill and Whitemud.

Should basement framing touch the concrete?

No. That puts wood and insulation against a cold and sometimes damp surface with no way to dry. The wall is held off, or a rigid layer goes on the concrete first. It costs an inch of floor and saves a musty basement.

Do you build bulkheads around ducting in Leger?

Yes — bulkheads and soffits to box in ductwork, plumbing and lighting are part of nearly every basement frame.

Framing Leger Edmonton | Stud Walls

Basement and partition framing in Leger

Bulkheads and soffits for ductwork and lighting
Stud spacing matched to the drywall going over it
Door rough openings framed to spec
Leger coverage — we come to you
Aspen Gardens, Bearspaw, Blue Quill coverage — we come to you
Wood-frame basement development layouts in Aspen Gardens, Bearspaw, Blue Quill
Interior partition walls framed square and plumb

Basement framing against foundation walls in Edmonton

Hold it off the concrete

Framing tight against an Leger foundation wall puts wood and insulation against a cold, sometimes damp surface with no way to dry.

How it is done

The wall is held off, or a rigid layer goes on the concrete first. It costs an inch or two of floor space and it is the difference between a basement that stays dry and one that smells musty in year two.

Leger drywall in context

About Leger

The Leger neighbourhood was named after a long serving Edmonton politician, Edmund Hugh Leger, who was first elected to City Council in 1959 and went on to serve as an alderman for 25 years.

What we see in Leger

In Leger the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We confirm what your home actually needs on site, in writing, before anything starts.

Layout for the sheet, not just for the room

Where the joints will land

Framing at the right spacing and adding backing where a sheet edge will fall means the board has something to fasten to at every joint.

Butt joints

An unsupported butt joint in an Leger wall is the hardest thing in drywall to hide. Thinking about sheet layout at framing stage removes them, and it costs nothing but attention.

Door and window openings

Square, plumb and the right size

An opening framed even slightly out means the door will not hang properly, and no amount of shimming fully fixes a twisted opening.

What we check

Diagonals measured rather than eyeballed, and the rough opening sized to the actual door being installed rather than a standard assumed. Getting the real door dimensions before framing saves a return visit.

Bulkheads, and why they are never straight by accident

Boxing what has to stay

Leger basements are full of ducts, beams and plumbing that cannot move. Bulkheads box them, and each one adds corners.

Getting them right

A bulkhead framed slightly out of square is obvious once it is boarded, because the eye follows its long lines. They take longer than their size suggests and they are worth the extra care.

Our Leger framing process in Edmonton, step by step

Layout before lumber

We chalk the plate lines from the plan or your walk-through direction and confirm every wall location in your Leger space before anything is cut.

Square, plumb, spaced right

We frame the walls square and plumb with stud spacing matched to the board going over them — the frame stage is where a wavy wall gets built or avoided. See our basement drywall work in Leger for the stage that follows.

Load-bearing walls and where we stop

Not our decision to make

Removing or altering a wall that carries load is a structural question, and we do not take a homeowner's assurance that a wall is non-bearing.

What we need

Drawings or an engineer's assessment. If a wall in an Leger renovation turns out to be bearing, the job becomes beams and posts — a different scope, and one far better priced before demolition than discovered during it.

How it works

Simple, clean, on schedule — Framing in Leger Edmonton

Free quote

We come out to your Leger Edmonton property, take a real look at the framing, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every framing quote in Leger Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the framing in Leger Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Leger Edmonton home while we finish the framing to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished framing with us and you're happy with the result in Leger Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the framing contractor Leger Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your framing project in Leger Edmonton.

Read our reviews on Google

FAQ — Framing Leger Edmonton

Framing Leger Edmonton: your questions answered

Can you take out this wall?: Only once we know it is not load-bearing, and that needs drawings or an engineer rather than an assumption. If it is bearing, the job becomes beams and posts — far better priced before demolition than discovered during it.
Can the same crew do the drywall after framing in Leger in Edmonton?: Yes — one crew frames, boards, tapes and finishes, so nothing gets lost in a handoff between trades.
Do you frame basement developments in Leger?: Yes — wood-frame basement layouts ready for drywall are our most common framing job. We also cover Aspen Gardens, Bearspaw, Blue Quill and Whitemud.
Do you frame basement developments in Leger?: Yes — wood-frame basement layouts ready for drywall are our most common framing job. We also cover Aspen Gardens, Bearspaw, Blue Quill and Whitemud.
Should basement framing touch the concrete in Edmonton?: No. That puts wood and insulation against a cold and sometimes damp surface with no way to dry. The wall is held off, or a rigid layer goes on the concrete first. It costs an inch of floor and saves a musty basement.
Do you build bulkheads around ducting in Leger?: Yes — bulkheads and soffits to box in ductwork, plumbing and lighting are part of nearly every basement frame.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Framing

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Framing Leger Edmonton

Basement and partition framing in Leger