Can you add backing for a TV mount and shelves?

Yes, and tell us before the wall closes. Adding backing while it is open takes minutes; finding it missing afterwards means opening the wall or relying on anchors that eventually pull out. We ask what is going on the walls first.

Can the same crew do the drywall after framing in Glenora?

Yes — one crew frames, boards, tapes and finishes, so nothing gets lost in a handoff between trades.

Can the same crew do the drywall after framing in Glenora?

Yes — one crew frames, boards, tapes and finishes, so nothing gets lost in a handoff between trades.

What is crowning a stud?

Sighting each stud and setting them all with the bow facing the same way so the wall plane is consistent. Studs set randomly give a wall that waves, and in an Glenora room with a window running along it that shows through the paint.

Steel studs or wood in a basement?

Often a mix — steel for long partition runs where straightness matters, wood where cabinets and heavy fixings are going. Steel will not warp or rot; wood takes fasteners anywhere. We will say which we would use where.

Do you coordinate with my electrician and plumber?

Yes — we sequence the framing so your other trades can rough in cleanly before insulation and drywall.

Framing Glenora Edmonton | Stud Walls

Framing in Glenora, square and ready for drywall

Stud spacing matched to the drywall going over it
Interior partition walls framed square and plumb
Boyle Street, Central McDougall, Dovercourt coverage — we come to you
Bulkheads and soffits for ductwork and lighting
Frame-to-finish: one crew frames, boards, tapes and finishes
Door rough openings framed to spec
Wood-frame basement development layouts in Glenora

Framing decides how good the drywall can be in Edmonton

The finish inherits the frame

A wall that is out of plumb or has a bowed stud cannot be made flat with compound. Every problem left in an Glenora frame becomes a finishing problem and then a visible one.

Why one crew helps

When the people framing know they will also be boarding and finishing, the incentive to crown studs properly and set a straight line is immediate rather than someone else's issue.

Glenora drywall in context

About Glenora

Glenora is one of Edmonton's most beautiful and historical neighbourhoods.

What we see in Glenora

In Glenora the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Load-bearing walls and where we stop

Not our decision to make

Removing or altering a wall that carries load is a structural question, and we do not take a homeowner's assurance that a wall is non-bearing.

What we need

Drawings or an engineer's assessment. If a wall in an Glenora renovation turns out to be bearing, the job becomes beams and posts — a different scope, and one far better priced before demolition than discovered during it.

Why Glenora homeowners trust Emplastrum for framing in Edmonton

Framed by the people who finish it

As a drywall and finishing company first, we frame walls the way we want to board and tape them — square, plumb and consistent — because no amount of mud hides a crooked frame in Glenora.

Fixed price, same-day reply

We cover Glenora, Boyle Street, Central McDougall, Dovercourt and Central, 7 days a week. Free on-site quotes and fixed prices, and we stand behind the work.

Our Glenora framing process in Edmonton, step by step

Layout before lumber

We chalk the plate lines from the plan or your walk-through direction and confirm every wall location in your Glenora space before anything is cut.

Square, plumb, spaced right

We frame the walls square and plumb with stud spacing matched to the board going over them — the frame stage is where a wavy wall gets built or avoided. See our basement drywall work in Glenora for the stage that follows.

Leaving room for mechanical and electrical

Framing comes first, services follow

An Glenora frame that leaves nowhere for a duct or a drain forces the mechanical trades to notch and drill in ways that weaken it.

Coordination

We would rather walk the layout with the other trades before framing than have them cut through a stud we set. It is a short conversation that avoids a structural argument later.

Door and window openings

Square, plumb and the right size

An opening framed even slightly out means the door will not hang properly, and no amount of shimming fully fixes a twisted opening.

What we check

Diagonals measured rather than eyeballed, and the rough opening sized to the actual door being installed rather than a standard assumed. Getting the real door dimensions before framing saves a return visit.

How it works

Simple, clean, on schedule — Framing in Glenora Edmonton

Free quote

We come out to your Glenora Edmonton property, take a real look at the framing, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every framing quote in Glenora Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the framing in Glenora Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Glenora Edmonton home while we finish the framing to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished framing with us and you're happy with the result in Glenora Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the framing contractor Glenora Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your framing project in Glenora Edmonton.

Read our reviews on Google

FAQ — Framing Glenora Edmonton

Framing Glenora Edmonton: your questions answered

Can you add backing for a TV mount and shelves?: Yes, and tell us before the wall closes. Adding backing while it is open takes minutes; finding it missing afterwards means opening the wall or relying on anchors that eventually pull out. We ask what is going on the walls first.
Can the same crew do the drywall after framing in Glenora in Edmonton?: Yes — one crew frames, boards, tapes and finishes, so nothing gets lost in a handoff between trades.
Can the same crew do the drywall after framing in Glenora in Edmonton?: Yes — one crew frames, boards, tapes and finishes, so nothing gets lost in a handoff between trades.
What is crowning a stud?: Sighting each stud and setting them all with the bow facing the same way so the wall plane is consistent. Studs set randomly give a wall that waves, and in an Glenora room with a window running along it that shows through the paint.
Steel studs or wood in a basement?: Often a mix — steel for long partition runs where straightness matters, wood where cabinets and heavy fixings are going. Steel will not warp or rot; wood takes fasteners anywhere. We will say which we would use where.
Do you coordinate with my electrician and plumber?: Yes — we sequence the framing so your other trades can rough in cleanly before insulation and drywall.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Framing

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Framing Glenora Edmonton

Framing in Glenora, square and ready for drywall