Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Basement and partition framing in Devon

Framing Devon

Watch framing jobs in Devon on our YouTube channel

Our Devon framing process, step by step

Layout before lumber

We chalk the plate lines from the plan or your walk-through direction and confirm every wall location in your Devon space before anything is cut.

Square, plumb, spaced right

We frame the walls square and plumb with stud spacing matched to the board going over them — the frame stage is where a wavy wall gets built or avoided. See our basement drywall work in Devon for the stage that follows.

Devon drywall in context

What we see in Devon

In Devon the drywall work is both plaster and stipple repair and new-build basement development. We confirm what your home actually needs on site, in writing, before anything starts.

Framing decides how good the drywall can be in Devon

The finish inherits the frame

A wall that is out of plumb or has a bowed stud cannot be made flat with compound. Every problem left in an Devon frame becomes a finishing problem and then a visible one.

Why one crew helps

When the people framing know they will also be boarding and finishing, the incentive to crown studs properly and set a straight line is immediate rather than someone else's issue.

Our Devon framing process, step by step

Layout before lumber

We chalk the plate lines from the plan or your walk-through direction and confirm every wall location in your Edmonton space before anything is cut.

Square, plumb, spaced right

We frame the walls square and plumb with stud spacing matched to the board going over them — the frame stage is where a wavy wall gets built or avoided. See our basement drywall work in Edmonton for the stage that follows.

Steel studs against wood in a Devon basement

Different tools for different jobs

Steel is straight, will not warp, does not burn and does not rot, which suits a basement or a shop. Wood takes fasteners anywhere and is easier for backing and heavy fixings.

How we choose

Often a mix — steel for the long partition runs where straightness matters, wood where cabinets and heavy items are going. We will say which we would use where and why.

Load-bearing walls and where we stop

Not our decision to make

Removing or altering a wall that carries load is a structural question, and we do not take a homeowner's assurance that a wall is non-bearing.

What we need

Drawings or an engineer's assessment. If a wall in an Devon renovation turns out to be bearing, the job becomes beams and posts — a different scope, and one far better priced before demolition than discovered during it.

Layout for the sheet, not just for the room

Where the joints will land

Framing at the right spacing and adding backing where a sheet edge will fall means the board has something to fasten to at every joint.

Butt joints

An unsupported butt joint in an Devon wall is the hardest thing in drywall to hide. Thinking about sheet layout at framing stage removes them, and it costs nothing but attention.

Simple, clean, on schedule — Framing in Devon

1

Free quote

We come out to your Devon property, take a real look at the framing, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every framing quote in Devon starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the framing in Devon. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your Devon home while we finish the framing to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished framing with us and you're happy with the result in Devon. If anything needs a second look, we handle it before we call the job done.

Rated by Devon Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the framing contractor Devon trusts for repair, restoration and finishing — rated on Google by Devon homeowners.

Read the reviews, or leave your own after your framing project in Devon.

Read our reviews on Google

Framing Devon: your questions answered

Do you build bulkheads around ducting in Devon?
Yes — bulkheads and soffits to box in ductwork, plumbing and lighting are part of nearly every basement frame.
Can you take out this wall?
Only once we know it is not load-bearing, and that needs drawings or an engineer rather than an assumption. If it is bearing, the job becomes beams and posts — far better priced before demolition than discovered during it.
Should basement framing touch the concrete in Devon?
No. That puts wood and insulation against a cold and sometimes damp surface with no way to dry. The wall is held off, or a rigid layer goes on the concrete first. It costs an inch of floor and saves a musty basement.
Do you frame basement developments in Devon?
Yes — wood-frame basement layouts ready for drywall are our most common framing job. We also cover Edmonton and Edmonton.
Can the same crew do the drywall after framing in Devon?
Yes — one crew frames, boards, tapes and finishes, so nothing gets lost in a handoff between trades.
Can the same crew do the drywall after framing in Devon?
Yes — one crew frames, boards, tapes and finishes, so nothing gets lost in a handoff between trades.

Need Devon’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Devon →
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook