Vapour Barrier Installation Jasper Place Edmonton

Vapour Barrier Installation Jasper Place Edmonton

Vapour Barrier Installation
Vapour Barrier Installation Edmonton

Vapour control in Jasper Place Edmonton, Edmonton — detailed properly around windows, boxes and the rim joist, where most of the failures actually happen.

Get My Free Quote Call (403) 829-8702

Emplastrum Drywall 5-Star Google Reviews
Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing
Poly and air sealing in Jasper Place Edmonton before the board goes on

Poly and air sealing in Jasper Place Edmonton before the board goes on

Alberta winters put a large vapour drive from inside to outside, so the barrier belongs on the warm side of the insulation. Getting the position right matters as much as getting it sealed: a second barrier on the cold side traps moisture in the assembly with no way to dry.

Watch

Vapour Barrier Installation Jasper Place Edmonton

Watch vapour barrier installation jobs in Jasper Place Edmonton on our YouTube channel

Inspection, and leaving it visible

It gets checked before it is covered

Vapour barrier and air sealing in Jasper Place Edmonton are inspected before drywall covers them. We sequence to your inspection date rather than boarding ahead and covering something the inspector needs to see.

If it does not pass

We want the inspector's note directly. Most failures are specific — an unsealed box, a floating seam, a torn return — and they are corrected faster from the actual note than from a second-hand summary.

Vapour Barrier Installation in every Jasper Place Edmonton community

Where we work in Jasper Place Edmonton

We cover vapour barrier installation across Jasper Place Edmonton. Pick your community below for the detail that applies to your street.

Renovations, and meeting an existing barrier

Continuity across old and new

In an Jasper Place Edmonton renovation the new poly has to tie into whatever is already in the wall. A new sheet stopped at the edge of the work leaves an open seam inside the assembly.

What we look for

Whether an existing barrier is present at all, what condition it is in, and whether there is a second one somewhere that would trap moisture between the two. Older renovations quite often have both, and finding that before boarding is worth the hour it takes.

Where the barrier meets the ceiling and the floor

The two continuous edges

A Jasper Place Edmonton wall barrier has to be sealed at the top plate and the bottom plate. Left loose, warm air simply goes over or under a perfectly installed sheet.

Cathedral and vaulted areas

Where a wall runs into a vaulted ceiling the junction is awkward and often skipped. It is also the warmest, wettest point in the room because that is where the air collects. It gets detailed properly or the rest of the sheet is decorative.

Electrical boxes, the usual failure point

A hole in the plane

Every outlet and switch in an Jasper Place Edmonton exterior wall is a cut in the poly. Left unsealed it is a direct path for moist air into the cavity, and the boxes are usually the coldest spot on the wall.

Poly hats and sealant

Boxes get a poly hat or an air-sealed box, and the poly is sealed to it rather than simply cut around. It is a small detail repeated dozens of times, which is exactly why it gets skipped.

Seams belong on framing

Not floating in a bay

A lap sealed in the middle of a cavity has nothing solid behind it. Any movement or pressure opens it, and it cannot be inspected properly.

How we run it

Sheets are sized so seams land on a stud or plate, lapped, and sealed against solid backing. It uses slightly more material and it is the difference between a barrier that holds and one that is only continuous on the day it was installed.

Warm side, always

The one rule everything else follows

The barrier goes on the heated side of the insulation. In an Jasper Place Edmonton climate that is the room side of an exterior wall.

Why position decides everything

Put it on the cold side and you have placed a moisture stop exactly where indoor humidity will condense against it, inside the wall, where nothing dries and nothing is visible until the damage is done.
How it works

Simple, clean, on schedule — Vapour Barrier Installation in Jasper Place Edmonton

1

Free quote

We come out to your Jasper Place Edmonton property, take a real look at the vapour barrier installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every vapour barrier installation quote in Jasper Place Edmonton starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the vapour barrier installation in Jasper Place Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your Jasper Place Edmonton home while we finish the vapour barrier installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished vapour barrier installation with us and you're happy with the result in Jasper Place Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the vapour barrier installation contractor Jasper Place Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your vapour barrier installation project in Jasper Place Edmonton.

Read our reviews on Google
FAQ — Vapour Barrier Installation Jasper Place Edmonton

Vapour Barrier Installation Jasper Place Edmonton: your questions answered

Can you install the barrier if someone else did the insulation?
Yes, but we check the insulation first. A barrier over a poorly filled cavity locks the problem in, and once the board is on neither can be corrected without opening the wall.
Will this stop water coming through my basement wall?
No, and installing it would hide the evidence. Water coming through a wall is a drainage and waterproofing problem. Vapour control manages moisture in the air, not liquid water, and we will say so rather than board over it.
Is poly always the right answer?
No. Some assemblies, such as insulated concrete basements or walls with exterior rigid insulation, are designed to dry inward, and poly stops that. We look at the whole assembly rather than defaulting.
What about outlets on exterior walls?
Each one is a deliberate hole. They need poly hats or airtight boxes sealed to the sheet. Taping poly to the front of an ordinary box does not last once board is fastened over it, and it is the most common leak we find.
What if there is already a vapour barrier in the wall?
We tie into it, and we check whether there is a second one somewhere that would trap moisture between the two. Older Jasper Place Edmonton renovations quite often have both, and finding that before boarding is worth the hour.
Is the vapour barrier the same as an air barrier?
Not by itself. Poly slows vapour diffusion; sealed properly it also slows air, and unsealed it does very little of either. The sealing is what turns a sheet of plastic into a working assembly.
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote

Vapour Barrier Installation in every Jasper Place Edmonton community

See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook