How long does the drywall part take?

Longer than people expect, because it cannot start until the plumbing is signed off and compound cannot be rushed. Board, coats with drying between, sand, prime, paint. Anyone promising all of it in two days is quoting a schedule they will not keep.

Do I need to wait for plumbing inspections before you repair the drywall in my Strathcona home?

Yes. We do not close any cut-out in your Strathcona home until the plumbing re-pipe is done and inspections have passed. Board over an Strathcona opening before the inspection and the inspector re-cuts it — double the repair bill. In Strathcona we sync with your plumber and slot in right after the inspections.

How do you handle texture matching after poly-b drywall repair work in Strathcona?

Texture matching is part of every repair and patch job we do in Strathcona. Whether the surrounding surface is knockdown, smooth or an older pattern, we match it so the repair is not visible under paint.

Can you match the wall and ceiling texture after patching?

Yes. Texture matching is part of every poly-B re-pipe drywall job we do in Edmonton. Whether the home has knockdown ceilings, smooth walls or a heavier stipple pattern, we match it so the patches are invisible under paint. This is not an add-on — it is standard.

Can you coordinate with my plumber for the re-pipe in Strathcona?

Yes. Tell us ahead of the Strathcona Poly-B work and we coordinate with the plumber around the inspection dates. This keeps the walls in your Strathcona home closed as quickly as possible after the plumbing work is done.

Poly-B Drywall Repair Strathcona Edmonton | Re-Pipe Patching

Poly-B re-pipe drywall repair in Strathcona

Poly-B plumbing was installed in Edmonton-area homes from the late 1970s through the mid-1990s. When a plumber does a full re-pipe or repairs a failed fitting in an Strathcona home, the job leaves cut-outs in walls and ceilings. Strathcona homes from the late 1980s and early 1990s have significant poly-B plumbing density. Homes from the mid-1990s onward were increasingly built with copper or early PEX. We come in after the Strathcona plumber is done and inspections have passed, close every opening, tape to Level 4 and texture match — the re-pipe is invisible when we leave. We cover Strathcona, Allendale, Argyll, Belgravia and surrounding communities, 7 days a week.

Tape to Level 4 and texture match on every patch
Same-day reply, free on-site quote, fixed price
Level 4 joints across the Strathcona repair: bedded, multi-coat, flat-sanded
Paint-ready when we leave
Contained dust throughout the Strathcona job, cleanup before we go
Every Strathcona joint taped to Level 4 — properly bedded, several coats, sanded flat
Single fitting failure patches — targeted, paint-ready

Doing the whole room while it is open

The one-time opportunity

The walls are already open, the room is already emptied and protected, and the paint is already going to be disturbed.

What is worth adding

Insulating an interior bedroom wall, adding blocking, running a wire, or moving to a full skim if the Strathcona wall was tired anyway. These cost a fraction now compared with a separate visit later, and we point them out rather than closing up quietly.

Strathcona drywall in context

About Strathcona

Strathcona was named for Lord Strathcona, Hudson Bay Company Governor (1889-1914) and the man chosen to drive the "last spike" of the CPR transcontinental railway.

What we see in Strathcona

In Strathcona the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Poly-B Drywall Repair work we do in Strathcona

In Strathcona, strathcona sits in Edmonton's Scona district. Strathcona was named for Lord Strathcona, Hudson Bay Company Governor (1889-1914) and the man chosen to drive the "last spike" of the CPR transcontinental railway. Across roughly 5,005 homes here, the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We cover Strathcona and the surrounding Scona district, 7 days a week. Assessed on site, priced up front, and finished properly — every time.

Our Edmonton poly-B re-pipe drywall repair process

Waiting for inspections before we close any opening in Edmonton homes

We do not close a single wall or ceiling cut-out until the plumbing re-pipe is done and inspections have passed. Closing drywall over plumbing that has not yet been inspected forces the inspector to cut it back open — and the homeowner pays for the repair twice. We coordinate with the plumber and schedule to follow inspections, not to race them.

Every opening closed, taped to Level 4, texture matched in Edmonton homes

After inspections, we fit new board into each cut-out, tape the joints to Level 4 — properly bedded tape, multiple coats, sanded flat. This is not a fast-patch job. The joints need to be right or they will show under paint. We texture match every repaired area to the surrounding wall or ceiling — knockdown, smooth or any pattern already in the room — and leave paint-ready. Where the plumber opened the Strathcona walls should be impossible to spot afterward.

Why Edmonton homeowners choose Emplastrum for poly-B re-pipe drywall repair

We coordinate with your plumber and follow inspections — we do not create rework

The fastest way to create rework on a re-pipe job is to start closing walls before inspections pass. We coordinate with the plumber, wait for inspections, then move in immediately after — so the timeline is tight and your home is not sitting open. Every opening gets the same Level 4 finish regardless of size, because a cut-out that reads as a patch under paint is not a finished job.

Fixed price for the full scope, texture match included, same-day reply

We cover all four Edmonton quadrants, Edmonton, Allendale, Argyll, Belgravia and Edmonton, 7 days a week. We come on-site, count every opening, note every texture in the home and give you a fixed price that covers the complete scope. No line-item surprises. Texture matching is part of the job — it is not an add-on. Free quotes, same-day reply.

Which Edmonton communities have the most poly-B plumbing?

Scona — the highest poly-B density neighbourhoods

The communities with the highest poly-B plumbing density in Edmonton are almost all in the northwest: Allendale, Argyll, Belgravia. These communities were built through the 1970s and into the early 1990s, and poly-B was the standard supply plumbing for the entire era. Full re-pipe drywall work in Scona is one of our most consistent services. If you are in one of these communities and have not had the plumbing addressed yet, a fitting failure is a matter of when, not if.

Scona — established communities with significant poly-B exposure

Scona communities including Allendale, Argyll, Belgravia have similar poly-B density to established Scona. Scona established communities — Allendale, Argyll, Belgravia — also have poly-B from the same era. Established Scona — Allendale, Argyll, Belgravia — rounds out the poly-B exposure across the city. Newer communities built after the mid-1990s — in all quadrants — have copper or PEX and see only small-scope plumbing repair patches.

Insulation and vapour barrier the pipes went through

Do not just close it

An exterior Strathcona wall opened for repiping usually has its insulation disturbed and its vapour barrier cut.

What we restore

Batts refitted properly, the barrier repaired and sealed before board goes back on. Boarding over a torn barrier hides a problem inside the wall that nobody will see until it stains the finish.

How it works

Simple, clean, on schedule — Poly-B Repair in Strathcona Edmonton

Free quote

We come out to your Strathcona Edmonton property, take a real look at the poly-b repair, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every poly-b repair quote in Strathcona Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the poly-b repair in Strathcona Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Strathcona Edmonton home while we finish the poly-b repair to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished poly-b repair with us and you're happy with the result in Strathcona Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the poly-b repair contractor Strathcona Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your poly-b repair project in Strathcona Edmonton.

Read our reviews on Google

FAQ — Poly-B Drywall Repair Strathcona Edmonton

Poly-B Drywall Repair Strathcona Edmonton: your questions answered

How long does the drywall part take?: Longer than people expect, because it cannot start until the plumbing is signed off and compound cannot be rushed. Board, coats with drying between, sand, prime, paint. Anyone promising all of it in two days is quoting a schedule they will not keep.
Do I need to wait for plumbing inspections before you repair the drywall in my Strathcona home?: Yes. We do not close any cut-out in your Strathcona home until the plumbing re-pipe is done and inspections have passed. Board over an Strathcona opening before the inspection and the inspector re-cuts it — double the repair bill. In Strathcona we sync with your plumber and slot in right after the inspections.
How do you handle texture matching after poly-b drywall repair work in Strathcona?: Texture matching is part of every repair and patch job we do in Strathcona. Whether the surrounding surface is knockdown, smooth or an older pattern, we match it so the repair is not visible under paint.
Can you match the wall and ceiling texture after patching?: Yes. Texture matching is part of every poly-B re-pipe drywall job we do in Edmonton. Whether the home has knockdown ceilings, smooth walls or a heavier stipple pattern, we match it so the patches are invisible under paint. This is not an add-on — it is standard.
Do you do poly-b drywall repair in Strathcona?: Yes — Strathcona is part of our regular service area. We cover Strathcona, Allendale, Argyll, Belgravia and surrounding communities, 7 days a week. Free on-site quotes, fixed prices, same-day reply.
Can you coordinate with my plumber for the re-pipe in Strathcona?: Yes. Tell us ahead of the Strathcona Poly-B work and we coordinate with the plumber around the inspection dates. This keeps the walls in your Strathcona home closed as quickly as possible after the plumbing work is done.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Poly-B Drywall Repair Strathcona Edmonton

Poly-B re-pipe drywall repair in Strathcona