Do you do the plumbing too?

No. Your plumber opens what they need and does the repipe; we close it back up and make the room look as though nothing happened. Knowing who owns the closing-up before the walls are opened keeps the project from stalling half finished.

Can you match the wall and ceiling texture after patching?

Yes. Texture matching is part of every poly-B re-pipe drywall job we do in Edmonton. Whether the home has knockdown ceilings, smooth walls or a heavier stipple pattern, we match it so the patches are invisible under paint. This is not an add-on — it is standard.

Can you coordinate with my plumber for the re-pipe in St. Albert?

Yes. Tell us ahead of the St. Albert Poly-B work and we coordinate with the plumber around the inspection dates. This keeps the walls in your St. Albert home closed as quickly as possible after the plumbing work is done.

Do you do poly-B re-pipe drywall repair in St. Albert?

Yes — St. Albert is part of our regular service area. We cover St. Albert, Edmonton and surrounding communities, 7 days a week. Free on-site quotes, fixed prices, same-day reply.

Is poly-b drywall repair in St. Albert a fixed price?

Yes. We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin.

How many wall and ceiling openings does a full poly-B re-pipe leave in an St. Albert home?

The St. Albert scope varies with the floor plan and the plumber’s new line routing. A typical full re-pipe in a Edmonton-area home leaves 15 to 40 cut-outs. The St. Albert assessment tallies each opening and sets a single fixed price — one invoice for the whole repipe patch.

Poly-B Drywall Repair St. Albert | Re-Pipe Patching

Poly-B re-pipe drywall repair in St. Albert

St. Albert is an Edmonton community, where poly-b pipe replacement leaves plumber openings that need patching and texture-matching We patch, tape and texture-match after the plumbers are done. We cover St. Albert and every all of Edmonton community, 7 days a week.

Targeted fitting failure patch — one cut-out to a full room
Coordination with plumber — we schedule after inspections pass
Free on-site quote, fixed price, same-day reply
Re-pipe drywall in St. Albert — all cut-outs closed, one scope, one invoice
Room-by-room dust control in your St. Albert home, clean at the end
Same-day reply, free on-site quote, fixed price
Coordinated with your plumber — we slot in after inspections pass

Doing the whole room while it is open

The one-time opportunity

The walls are already open, the room is already emptied and protected, and the paint is already going to be disturbed.

What is worth adding

Insulating an interior bedroom wall, adding blocking, running a wire, or moving to a full skim if the St. Albert wall was tired anyway. These cost a fraction now compared with a separate visit later, and we point them out rather than closing up quietly.

St. Albert drywall in context

About St. Albert

Albert has a genuine mix of older and newer homes (about 54% pre-1991, 25% since 2000), so we see both plaster and stipple repair and new-build basement development.

What we see in St. Albert

In St. Albert the drywall work is both plaster and stipple repair and new-build basement development. We confirm what your home actually needs on site, in writing, before anything starts.

Ceilings after an overhead repipe

The harder half

Ceiling access strips run long and land in the worst possible light, so a ceiling repair shows up far more readily than the same work on a wall.

How we handle it

Butt joints backed and floated wide, the texture matched if there is one, and the St. Albert ceiling primed and painted in full spans rather than patched, because a ceiling almost never hides a spot repaint.

Cutting for access, before it is opened

Where the openings go matters

A plumber cuts where the pipe is. If we are involved before that, openings can often be placed to land on framing, in one plane, and away from corners.

What it saves

A neat rectangle between two studs closes cleanly. A ragged hole across a corner in an St. Albert hallway costs far more to make invisible. Ten minutes of coordination changes the repair bill.

What affects the cost of poly-B re-pipe drywall repair in Edmonton?

Patch count, ceiling vs. wall, and texture matching

The main cost drivers for poly-B re-pipe drywall repair in Edmonton are how many cut-outs the plumber left, whether the openings are in walls or ceilings (ceilings take more setup), and how many different textures need to be matched throughout the home. A full re-pipe in a 1970s Edmonton bungalow — one storey, slab-on-grade or crawl space below — can leave 15 to 25 wall and ceiling patches. A two-storey from the same era can leave 25 to 40. We walk the St. Albert home, scope every opening and set a fixed price for all of it.

Coordinating around the plumber in Edmonton

Re-pipe jobs go smoothest when the drywall work follows the plumbing directly. We schedule to come in immediately after the plumber is done and inspections have passed — so your Edmonton home is not sitting with open walls for weeks. If you are planning a re-pipe, call us before the plumbing starts and we can coordinate the timing from the beginning.

Scheduling around the water being off

Two trades, one timeline

Drywall cannot start until the plumbing is inspected and signed off, and compound cannot be rushed after that.

What to expect

We give the honest sequence for the St. Albert house: plumber, inspection, board, coats with drying between, sand, prime, paint. Anyone promising it all inside two days is quoting a schedule they will not keep.

Insulation and vapour barrier the pipes went through

Do not just close it

An exterior St. Albert wall opened for repiping usually has its insulation disturbed and its vapour barrier cut.

What we restore

Batts refitted properly, the barrier repaired and sealed before board goes back on. Boarding over a torn barrier hides a problem inside the wall that nobody will see until it stains the finish.

How it works

Simple, clean, on schedule — Poly-B Repair in St Albert

Free quote

We come out to your St Albert property, take a real look at the poly-b repair, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every poly-b repair quote in St Albert starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the poly-b repair in St Albert. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your St Albert home while we finish the poly-b repair to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished poly-b repair with us and you're happy with the result in St Albert. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by St. Albert Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the poly-b repair contractor St Albert trusts for repair, restoration and finishing — rated on Google by St. Albert homeowners.

Read the reviews, or leave your own after your poly-b repair project in St Albert.

Read our reviews on Google

FAQ — Poly-B Drywall Repair St. Albert

Poly-B Drywall Repair St. Albert: your questions answered

Do you do the plumbing too?: No. Your plumber opens what they need and does the repipe; we close it back up and make the room look as though nothing happened. Knowing who owns the closing-up before the walls are opened keeps the project from stalling half finished.
Can you match the wall and ceiling texture after patching?: Yes. Texture matching is part of every poly-B re-pipe drywall job we do in Edmonton. Whether the home has knockdown ceilings, smooth walls or a heavier stipple pattern, we match it so the patches are invisible under paint. This is not an add-on — it is standard.
Can you coordinate with my plumber for the re-pipe in St. Albert?: Yes. Tell us ahead of the St. Albert Poly-B work and we coordinate with the plumber around the inspection dates. This keeps the walls in your St. Albert home closed as quickly as possible after the plumbing work is done.
Do you do poly-B re-pipe drywall repair in St. Albert?: Yes — St. Albert is part of our regular service area. We cover St. Albert, Edmonton and surrounding communities, 7 days a week. Free on-site quotes, fixed prices, same-day reply.
Is poly-b drywall repair in St. Albert a fixed price?: Yes. We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin.
How many wall and ceiling openings does a full poly-B re-pipe leave in an St. Albert home?: The St. Albert scope varies with the floor plan and the plumber’s new line routing. A typical full re-pipe in a Edmonton-area home leaves 15 to 40 cut-outs. The St. Albert assessment tallies each opening and sets a single fixed price — one invoice for the whole repipe patch.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Poly-B Drywall Repair St. Albert

Poly-B re-pipe drywall repair in St. Albert