Do you serve Kildare on weekends?

Yes — we cover Kildare and surrounding communities seven days a week. Call or text ' . emp_phone() . ' for a same-day reply.

Do I need to wait for plumbing inspections before you repair the drywall?

Yes. We do not close any wall or ceiling cut-out until the plumbing re-pipe is done and inspections have passed. Closing drywall before inspection forces the inspector to cut back in — you pay for the repair twice. We work around your Kildare plumber and book to follow the repipe inspections.

Can you coordinate with my plumber for the re-pipe in Kildare?

Yes. Tell us ahead of the Kildare Poly-B work and we coordinate with the plumber around the inspection dates. This keeps the walls in your Kildare home closed as quickly as possible after the plumbing work is done.

Do I need to wait for plumbing inspections before you repair the drywall in my Kildare home?

Yes. We do not close any cut-out in your Kildare home until the plumbing re-pipe is done and inspections have passed. Board over an Kildare opening before the inspection and the inspector re-cuts it — double the repair bill. In Kildare we sync with your plumber and slot in right after the inspections.

Do you do poly-B re-pipe drywall repair across all of Edmonton?

Yes — we cover all four Edmonton quadrants, Edmonton, Balwin, Bannerman, Belmont and Edmonton, 7 days a week. Free on-site quotes, fixed prices, same-day reply. We work in all the established Northeast communities with high poly-B density, and in newer communities where the calls are smaller-scope plumbing repair patches.

How long does the drywall part take?

Longer than people expect, because it cannot start until the plumbing is signed off and compound cannot be rushed. Board, coats with drying between, sand, prime, paint. Anyone promising all of it in two days is quoting a schedule they will not keep.

Poly-B Drywall Repair Kildare Edmonton | Re-Pipe Patching

Poly-B re-pipe drywall repair in Kildare

Poly-B plumbing was installed in Edmonton-area homes from the late 1970s through the mid-1990s. When a plumber does a full re-pipe or repairs a failed fitting in a Kildare home, the job leaves cut-outs in walls and ceilings. Kildare was built with PEX or copper plumbing. Plumbing repair patches here are small scope. After the Kildare plumbing and inspections, we seal every cut-out, tape to Level 4 and texture-match — no trace of the Poly-B work. We cover Kildare, Balwin, Bannerman, Belmont and surrounding communities, 7 days a week.

Dust contained, room protected during repair
Single fitting failure patches in Kildare — targeted, paint-ready
Coordinated with your Kildare plumber — we follow the Poly-B inspections
Kildare dust kept contained through the house, tidied before departure
Dust contained, work room by room, clean before we leave
Tape to Level 4 on every Kildare patch — bedded tape, multiple coats, sanded flat
Free on-site quotes, fixed prices, same-day reply

Cutting for access, before it is opened

Where the openings go matters

A plumber cuts where the pipe is. If we are involved before that, openings can often be placed to land on framing, in one plane, and away from corners.

What it saves

A neat rectangle between two studs closes cleanly. A ragged hole across a corner in an Kildare hallway costs far more to make invisible. Ten minutes of coordination changes the repair bill.

Which Edmonton communities have the most poly-B plumbing?

Northeast — the highest poly-B density neighbourhoods

The communities with the highest poly-B plumbing density in Edmonton are almost all in the northwest: Balwin, Bannerman, Belmont. These communities were built through the 1970s and into the early 1990s, and poly-B was the standard supply plumbing for the entire era. Full re-pipe drywall work in Northeast is one of our most consistent services. If you are in one of these communities and have not had the plumbing addressed yet, a fitting failure is a matter of when, not if.

Northeast — established communities with significant poly-B exposure

Northeast communities including Balwin, Bannerman, Belmont have similar poly-B density to established Northeast. Northeast established communities — Balwin, Bannerman, Belmont — also have poly-B from the same era. Established Northeast — Balwin, Bannerman, Belmont — rounds out the poly-B exposure across the city. Newer communities built after the mid-1990s — in all quadrants — have copper or PEX and see only small-scope plumbing repair patches.

Types of Poly-B Drywall Repair work in Kildare

New installs, renovation work and repair in Kildare

We handle the full range of poly-b drywall repair work in Kildare — from brand-new basement boarding and taping to single-room renovation patches and targeted repair work. Every job gets the same Level 4 standard and fixed price commitment.

Legal suites and multi-use spaces in Kildare

Legal suite work in Kildare requires specific board specs: fire-rated on the suite ceiling, soundproof on party walls, moisture-resistant in wet areas. We confirm the spec before we start and board to it.

Our poly-B re-pipe drywall repair process in Kildare

Inspections first — we do not close cut-outs early in Kildare homes

We do not close a single wall or ceiling cut-out in your Kildare home until the plumbing re-pipe is done and inspections have passed. If Kildare openings are boarded before the repipe inspection, the inspector reopens them and the homeowner is billed twice. We coordinate with the plumber and schedule to follow the inspection, every time.

Every opening taped to Level 4 and texture matched in Kildare

After inspections, we fit new board into each cut-out and tape the joints to Level 4 — properly bedded tape, multiple coats, sanded flat. Get the Kildare joints wrong and they show through the paint later. We texture match every repaired area to the surrounding wall or ceiling in your Kildare home — knockdown, smooth or any existing pattern — and leave paint-ready. In Kildare, the plumber’s cut lines should vanish completely.

Our Edmonton poly-B re-pipe drywall repair process

Waiting for inspections before we close any opening in Edmonton homes

We do not close a single wall or ceiling cut-out until the plumbing re-pipe is done and inspections have passed. Closing drywall over plumbing that has not yet been inspected forces the inspector to cut it back open — and the homeowner pays for the repair twice. We coordinate with the plumber and schedule to follow inspections, not to race them.

Every opening closed, taped to Level 4, texture matched in Edmonton homes

After inspections, we fit new board into each cut-out, tape the joints to Level 4 — properly bedded tape, multiple coats, sanded flat. This is not a fast-patch job. The joints need to be right or they will show under paint. We texture match every repaired area to the surrounding wall or ceiling — knockdown, smooth or any pattern already in the room — and leave paint-ready. Where the plumber opened the Kildare walls should be impossible to spot afterward.

How it works

Simple, clean, on schedule — Poly-B Repair in Kildare Edmonton

Free quote

We come out to your Kildare Edmonton property, take a real look at the poly-b repair, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every poly-b repair quote in Kildare Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the poly-b repair in Kildare Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Kildare Edmonton home while we finish the poly-b repair to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished poly-b repair with us and you're happy with the result in Kildare Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the poly-b repair contractor Kildare Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your poly-b repair project in Kildare Edmonton.

Read our reviews on Google

FAQ — Poly-B Drywall Repair Kildare Edmonton

Poly-B Drywall Repair Kildare Edmonton: your questions answered

Do you serve Kildare on weekends?: Yes — we cover Kildare and surrounding communities seven days a week. Call or text ' . emp_phone() . ' for a same-day reply.
Do I need to wait for plumbing inspections before you repair the drywall?: Yes. We do not close any wall or ceiling cut-out until the plumbing re-pipe is done and inspections have passed. Closing drywall before inspection forces the inspector to cut back in — you pay for the repair twice. We work around your Kildare plumber and book to follow the repipe inspections.
Can you coordinate with my plumber for the re-pipe in Kildare?: Yes. Tell us ahead of the Kildare Poly-B work and we coordinate with the plumber around the inspection dates. This keeps the walls in your Kildare home closed as quickly as possible after the plumbing work is done.
Do I need to wait for plumbing inspections before you repair the drywall in my Kildare home?: Yes. We do not close any cut-out in your Kildare home until the plumbing re-pipe is done and inspections have passed. Board over an Kildare opening before the inspection and the inspector re-cuts it — double the repair bill. In Kildare we sync with your plumber and slot in right after the inspections.
Do you do poly-B re-pipe drywall repair across all of Edmonton?: Yes — we cover all four Edmonton quadrants, Edmonton, Balwin, Bannerman, Belmont and Edmonton, 7 days a week. Free on-site quotes, fixed prices, same-day reply. We work in all the established Northeast communities with high poly-B density, and in newer communities where the calls are smaller-scope plumbing repair patches.
How long does the drywall part take?: Longer than people expect, because it cannot start until the plumbing is signed off and compound cannot be rushed. Board, coats with drying between, sand, prime, paint. Anyone promising all of it in two days is quoting a schedule they will not keep.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Poly-B Drywall Repair Kildare Edmonton

Poly-B re-pipe drywall repair in Kildare