How long does the drywall part take?

Longer than people expect, because it cannot start until the plumbing is signed off and compound cannot be rushed. Board, coats with drying between, sand, prime, paint. Anyone promising all of it in two days is quoting a schedule they will not keep.

How many wall and ceiling openings does a full poly-B re-pipe leave in an Fraser home?

The Fraser scope varies with the floor plan and the plumber’s new line routing. A typical full re-pipe in a Edmonton-area home leaves 15 to 40 cut-outs. The Fraser assessment tallies each opening and sets a single fixed price — one invoice for the whole repipe patch.

Do I need to wait for plumbing inspections before you repair the drywall in my Fraser home?

Yes. We do not close any cut-out in your Fraser home until the plumbing re-pipe is done and inspections have passed. Board over an Fraser opening before the inspection and the inspector re-cuts it — double the repair bill. In Fraser we sync with your plumber and slot in right after the inspections.

Can you match the wall and ceiling texture after the patches in Fraser?

Yes. Texture matching is part of every poly-B re-pipe drywall job we do in Fraser. Whatever the Fraser texture — knockdown, smooth, other — we blend it so the patches disappear once painted. In Fraser it comes standard, never an extra.

Can you coordinate with my plumber for the re-pipe in Fraser?

Yes. Tell us ahead of the Fraser Poly-B work and we coordinate with the plumber around the inspection dates. This keeps the walls in your Fraser home closed as quickly as possible after the plumbing work is done.

Poly-B Drywall Repair Fraser Edmonton | Re-Pipe Patching

Poly-B re-pipe drywall repair in Fraser

Poly-B plumbing was installed in Edmonton-area homes from the late 1970s through the mid-1990s. When a plumber does a full re-pipe or repairs a failed fitting in an Fraser home, the job leaves cut-outs in walls and ceilings. Fraser homes from the late 1980s and early 1990s have significant poly-B plumbing density. Homes from the mid-1990s onward were increasingly built with copper or early PEX. We come in after the Fraser plumber is done and inspections have passed, close every opening, tape to Level 4 and texture match — the re-pipe is invisible when we leave. We cover Fraser, Balwin, Bannerman, Belmont and surrounding communities, 7 days a week.

Drywall repair after poly-B re-pipe — all cut-outs closed
Paint-ready when we leave
Fraser dust kept contained through the house, tidied before departure
Texture matched — knockdown, smooth, or existing pattern
Fraser work scheduled around your plumber and the repipe inspections
Contained dust throughout the Fraser job, cleanup before we go
Fraser patches finished to Level 4 — bedded tape, built-up coats, a flat sand

Poly-B Drywall Repair work we do in Fraser

In Fraser, fraser sits in Edmonton's Northeast district. Named for John Fraser, an original homesteader in the area and one of the first trustees of the Belmont School, Fraser is located in the City's far northwest. Across roughly 1,325 homes here, the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We cover Fraser and the surrounding Northeast district, 7 days a week. Assessed on site, priced up front, and finished properly — every time.

Fraser drywall in context

About Fraser

Named for John Fraser, an original homesteader in the area and one of the first trustees of the Belmont School, Fraser is located in the City's far northwest.

What we see in Fraser

In Fraser the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Poly-B drywall repair work we do across Edmonton

Full re-pipe drywall work in Northeast’s established communities

Balwin, Bannerman, Belmont — these are the Edmonton communities where we do consistent full re-pipe drywall work. A typical job in one of these homes involves 15 to 40 wall and ceiling cut-outs across multiple rooms, closets, utility spaces and occasionally crawl spaces. In Fraser we seal each opening, take joints to Level 4 and match texture everywhere. We work room by room so the home stays livable, and we clean up each room completely before we move on.

Single fitting failure patches and newer-community repair work

Not every poly-B call is a full re-pipe. A single fitting failure at a bathroom shutoff or hot water tank connection in a home that has not yet been re-piped leaves a targeted cut-out. We patch it, tape to Level 4 and texture match — same standard as a full re-pipe job, just a single opening. In newer Edmonton communities — Balwin, Bannerman, Belmont — the calls are small-scope plumbing repair patches where the primary requirement is a clean Level 4 finish and a precise texture match.

Scheduling around the water being off

Two trades, one timeline

Drywall cannot start until the plumbing is inspected and signed off, and compound cannot be rushed after that.

What to expect

We give the honest sequence for the Fraser house: plumber, inspection, board, coats with drying between, sand, prime, paint. Anyone promising it all inside two days is quoting a schedule they will not keep.

About Poly-B Drywall Repair in Fraser

Poly-B Drywall Repair in Fraser — what to expect

We provide poly-b drywall repair services in Fraser and surrounding communities, 7 days a week. Fraser is one of Northeast’s oldest communities, with homes from the 1960s and 1970s. Renovation drywall, stipple and popcorn ceiling removal and crack repair are among the most common drywall calls from this established Northeast area.

Fixed price — assessed on site in Fraser

We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin unless the scope changes and we agree on it first.

Our Edmonton poly-B re-pipe drywall repair process

Waiting for inspections before we close any opening in Edmonton homes

We do not close a single wall or ceiling cut-out until the plumbing re-pipe is done and inspections have passed. Closing drywall over plumbing that has not yet been inspected forces the inspector to cut it back open — and the homeowner pays for the repair twice. We coordinate with the plumber and schedule to follow inspections, not to race them.

Every opening closed, taped to Level 4, texture matched in Edmonton homes

After inspections, we fit new board into each cut-out, tape the joints to Level 4 — properly bedded tape, multiple coats, sanded flat. This is not a fast-patch job. The joints need to be right or they will show under paint. We texture match every repaired area to the surrounding wall or ceiling — knockdown, smooth or any pattern already in the room — and leave paint-ready. Where the plumber opened the Fraser walls should be impossible to spot afterward.

Closing up after the repipe, at a price fixed up front

The half of the job nobody quotes

Homeowners are usually given a repipe price with the drywall left as an open question. We give a fixed price at the on-site quote for putting the house back, and the number does not change.

Back to paint-ready

Every joint taped to Level 4, every texture matched precisely, and the surface left paint-ready when we leave. We cover Fraser, Balwin, Bannerman, Belmont and surrounding communities, with free on-site quotes and a same-day reply, 7 days a week. Call or text ' . emp_phone() . '.

How it works

Simple, clean, on schedule — Poly-B Repair in Fraser Edmonton

Free quote

We come out to your Fraser Edmonton property, take a real look at the poly-b repair, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every poly-b repair quote in Fraser Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the poly-b repair in Fraser Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Fraser Edmonton home while we finish the poly-b repair to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished poly-b repair with us and you're happy with the result in Fraser Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the poly-b repair contractor Fraser Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your poly-b repair project in Fraser Edmonton.

Read our reviews on Google

FAQ — Poly-B Drywall Repair Fraser Edmonton

Poly-B Drywall Repair Fraser Edmonton: your questions answered

How long does the drywall part take?: Longer than people expect, because it cannot start until the plumbing is signed off and compound cannot be rushed. Board, coats with drying between, sand, prime, paint. Anyone promising all of it in two days is quoting a schedule they will not keep.
How many wall and ceiling openings does a full poly-B re-pipe leave in an Fraser home?: The Fraser scope varies with the floor plan and the plumber’s new line routing. A typical full re-pipe in a Edmonton-area home leaves 15 to 40 cut-outs. The Fraser assessment tallies each opening and sets a single fixed price — one invoice for the whole repipe patch.
Do you do poly-B re-pipe drywall repair in Fraser?: Yes — Fraser is part of our regular service area. We cover Fraser, Balwin, Bannerman, Belmont and surrounding communities, 7 days a week. Free on-site quotes, fixed prices, same-day reply.
Do I need to wait for plumbing inspections before you repair the drywall in my Fraser home?: Yes. We do not close any cut-out in your Fraser home until the plumbing re-pipe is done and inspections have passed. Board over an Fraser opening before the inspection and the inspector re-cuts it — double the repair bill. In Fraser we sync with your plumber and slot in right after the inspections.
Can you match the wall and ceiling texture after the patches in Fraser?: Yes. Texture matching is part of every poly-B re-pipe drywall job we do in Fraser. Whatever the Fraser texture — knockdown, smooth, other — we blend it so the patches disappear once painted. In Fraser it comes standard, never an extra.
Can you coordinate with my plumber for the re-pipe in Fraser?: Yes. Tell us ahead of the Fraser Poly-B work and we coordinate with the plumber around the inspection dates. This keeps the walls in your Fraser home closed as quickly as possible after the plumbing work is done.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Poly-B Drywall Repair Fraser Edmonton

Poly-B re-pipe drywall repair in Fraser