Do you coordinate with my other trades in Pleasantview?

Yes — we slot into the build schedule and coordinate with framers, electricians and plumbers so the drywall stage keeps your Pleasantview project moving.

Do you stand behind your new construction drywall in Pleasantview?

Yes. We walk the finished Pleasantview job with you before we hand it off for paint, and if something is not right we come back and make it right.

Does the Pleasantview board spec follow code requirements?

Yes — Pleasantview separations get fire-rated board; wet areas get moisture-resistant. We board your Pleasantview project to spec so it passes inspection.

Can you keep to our construction schedule?

We quote a sequence with durations rather than a single date, tell you what must be complete before we start, and flag early if something slips. That is more useful than a confident date that moves twice.

Do you install the right board where code requires it in Pleasantview?

Yes — fire-rated board on Pleasantview garage and suite separations, moisture-resistant in wet areas. We board your Pleasantview project to spec so it passes inspection.

Will the correct board go where Pleasantview code demands it?

Yes — Type X where Pleasantview garages and suites meet the house, moisture-resistant board in wet zones. We board your Pleasantview project to spec so it passes inspection.

New Construction Drywall Pleasantview Edmonton | New Build Taping

Boarding and finishing a new Pleasantview build with one crew

The drywall makes or breaks a new Pleasantview build — get the boarding square, the tape tight and the finish flat and everything after goes smoothly. In Pleasantview we board, tape, mud and finish new construction to a smooth Level 4 or 5, with fire-rated, moisture-resistant and soundproof board wherever the plan calls for it. Pleasantview is one of Scona's newer communities, where fresh installation and first-year settling work are common, so new-construction work here is steady. We cover Pleasantview, Allendale, Argyll, Belgravia and Scona, 7 days a week.

Basement and secondary-suite drywall
Coordinated with your other trades and timeline
Level 4 or Level 5 finishing
Full new-build boarding and finishing in Pleasantview
Pleasantview coverage — we come to you
Additions, infills and second-storey builds
Fire-rated, moisture-resistant and soundproof board to spec

Garage and mechanical room assemblies

Rated, not just boarded

The garage ceiling under living space, the garage-to-house wall and the furnace room usually need rated assemblies on an Pleasantview build.

Inspected before covered

Those are inspected before the finish goes on, so they are sequenced to the inspection rather than boarded ahead. It is also the assembly most often found incomplete later — board up, joints untaped.

Pleasantview drywall in context

About Pleasantview

Close to Southgate Mall, the area's most prominent feature is its elevation: hence the name Pleasantview.

What we see in Pleasantview

In Pleasantview the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

One crew hanging and finishing

Removing the handoff

The common failure on an Pleasantview build is a boarding crew and a taping crew with a gap between them: poor hanging becomes the finisher's problem, and nobody owns it.

What that changes

When the crew that finishes also hangs, the layout decisions are made by the people who will have to hide them. It also removes a scheduling gap where a build typically loses a week.

Punch list and callbacks

Expect some

On a house-sized job there will be a short list after the trades that follow us bang, drill and load things in.

How we handle it

One consolidated visit once the other trades are clear, rather than repeated trips that get in everyone's way. We would rather come once at the right time than five times at the wrong ones.

Temperature and humidity on an Pleasantview site

Compound needs conditions

Joint compound will not cure properly in a cold building, and forcing it produces joints that shrink and crack after the heat goes on.

What we need

A building that can hold a steady temperature through the taping stage, with ventilation to carry moisture away. In an Alberta winter that means temporary heat planned into the schedule rather than assumed.

Handing over to the painter

What paint-ready actually means

Sanded, dust removed, edges cut clean, and any defect the painter would otherwise find dealt with first.

The walkthrough

We would rather walk an Pleasantview house with the painter before they start than receive a list afterwards. Most disputes between the two trades are about surfaces neither inspected together, and ten minutes at handover prevents them.

What has to be complete before we start

The gate list

Framing signed off, mechanical and electrical rough-in inspected, insulation and vapour barrier in and passed, and the building closed in and able to hold temperature.

Why we insist

Boarding over an uninspected rough-in means opening a finished wall. On an Pleasantview build that is days lost and a trade relationship damaged, so we would rather hold a start date than take one that is not ready.

How it works

Simple, clean, on schedule — New Construction Drywall in Pleasantview Edmonton

Free quote

We come out to your Pleasantview Edmonton property, take a real look at the new construction drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every new construction drywall quote in Pleasantview Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the new construction drywall in Pleasantview Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Pleasantview Edmonton home while we finish the new construction drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished new construction drywall with us and you're happy with the result in Pleasantview Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the new construction drywall contractor Pleasantview Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your new construction drywall project in Pleasantview Edmonton.

Read our reviews on Google

FAQ — New Construction Drywall Pleasantview Edmonton

New Construction Drywall Pleasantview Edmonton: your questions answered

Do you coordinate with my other trades in Pleasantview?: Yes — we slot into the build schedule and coordinate with framers, electricians and plumbers so the drywall stage keeps your Pleasantview project moving.
Do you stand behind your new construction drywall in Pleasantview in Edmonton?: Yes. We walk the finished Pleasantview job with you before we hand it off for paint, and if something is not right we come back and make it right.
Does the Pleasantview board spec follow code requirements?: Yes — Pleasantview separations get fire-rated board; wet areas get moisture-resistant. We board your Pleasantview project to spec so it passes inspection.
Can you keep to our construction schedule?: We quote a sequence with durations rather than a single date, tell you what must be complete before we start, and flag early if something slips. That is more useful than a confident date that moves twice.
Do you install the right board where code requires it in Pleasantview?: Yes — fire-rated board on Pleasantview garage and suite separations, moisture-resistant in wet areas. We board your Pleasantview project to spec so it passes inspection.
Will the correct board go where Pleasantview code demands it?: Yes — Type X where Pleasantview garages and suites meet the house, moisture-resistant board in wet zones. We board your Pleasantview project to spec so it passes inspection.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

New Construction Drywall Pleasantview Edmonton

Boarding and finishing a new Pleasantview build with one crew