Can you work to our construction schedule?

Yes, and we would rather commit to a sequence than a single date. We tell you what must be complete before we start, roughly how long each stage takes, and what would push it — so if something slips, you know early.

What finish level should a new Pembina home be?

Most living areas are well served by a standard finish; large walls with raking window light and feature areas justify going higher. We will tell you which walls in your plan actually justify the upgrade rather than pricing the whole house at the top level.

Do you offer Level 5 finishing for new Pembina builds?

Yes — we finish new construction to a flat Level 4 or, where the paint spec calls for it, a full Level 5 skim on feature areas in your Pembina build.

Can you finish a Pembina new build to Level 5?

Yes — we finish new construction to a flat Level 4 or, where the paint spec calls for it, a full Level 5 skim on feature areas in your Pembina build.

Does the Pembina board spec follow code requirements?

Yes — Pembina separations get fire-rated board; wet areas get moisture-resistant. We board your Pembina project to spec so it passes inspection.

Do you coordinate with my other trades in Pembina?

Yes — we slot into the build schedule and coordinate with framers, electricians and plumbers so the drywall stage keeps your Pembina project moving.

New Construction Drywall Pembina Edmonton | New Build Taping

Boarding and finishing a new Pembina build with one crew

New Pembina builds and major additions live or die on the drywall — boarded square, taped tight, finished flat, and the paint and trim fall into place. In Pembina we board, tape, mud and finish new construction to a smooth Level 4 or 5, with fire-rated, moisture-resistant and soundproof board wherever the plan calls for it. Pembina is an Northwest community with a mix of older homes and newer builds, so new-construction work here is steady. We cover Pembina, Albany, Athlone, Baranow and Northwest, 7 days a week.

Pembina coverage — we come to you
Full new-build boarding and finishing in Pembina
Additions, infills and second-storey builds
Level 4 or Level 5 finishing
Fire-rated, moisture-resistant and soundproof board to spec
Coordinated with your other trades and timeline
Basement and secondary-suite drywall

Temperature and humidity on an Pembina site

Compound needs conditions

Joint compound will not cure properly in a cold building, and forcing it produces joints that shrink and crack after the heat goes on.

What we need

A building that can hold a steady temperature through the taping stage, with ventilation to carry moisture away. In an Alberta winter that means temporary heat planned into the schedule rather than assumed.

Sequencing around the other trades

You are in the middle

Drywall sits after mechanical and insulation, before flooring, trim, cabinets and paint. Everything behind you is waiting for you to finish.

How we commit

We quote a sequence with durations rather than one date, tell you what must be complete before we start, and flag early if something slips. That is more useful to a builder than a confident single date that moves twice.

Punch list and callbacks

Expect some

On a house-sized job there will be a short list after the trades that follow us bang, drill and load things in.

How we handle it

One consolidated visit once the other trades are clear, rather than repeated trips that get in everyone's way. We would rather come once at the right time than five times at the wrong ones.

Level of finish, room by room

Match it to the light

Most Pembina rooms are well served by Level 4. Great rooms, tall entries and any wall with a window running down it justify Level 5.

Deciding at the right time

This is a framing-stage decision, not a taping-stage one, because it changes the schedule. Deciding late compresses the coats at exactly the point where compression causes cracks.

Site protection and cleanup on a new build

Not an empty shell for long

By the time we are boarding, an Pembina build often has windows, some flooring substrate and finished mechanical in place.

What we protect

Floors, window frames, stair treads and any installed fixtures. Drywall debris and compound left to dry on a subfloor is a cost transferred to the flooring trade, and builders remember which crews do that.

What affects the cost of new construction drywall in Pembina in Edmonton?

Size, board spec and finish level

The cost in Pembina depends on the square footage, the board spec (fire-rated, moisture-resistant and soundproof board cost more than standard), and the finish level — a Level 5 is more skim work than a Level 4. We price off the plans and a site look.

Spec done right in Pembina

We put the right board where the plan and code call for it — fire-rated on garage and suite separations, moisture-resistant in wet areas — so your Pembina build passes inspection the first time.

How it works

Simple, clean, on schedule — New Construction Drywall in Pembina Edmonton

Free quote

We come out to your Pembina Edmonton property, take a real look at the new construction drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every new construction drywall quote in Pembina Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the new construction drywall in Pembina Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Pembina Edmonton home while we finish the new construction drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished new construction drywall with us and you're happy with the result in Pembina Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the new construction drywall contractor Pembina Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your new construction drywall project in Pembina Edmonton.

Read our reviews on Google

FAQ — New Construction Drywall Pembina Edmonton

New Construction Drywall Pembina Edmonton: your questions answered

Can you work to our construction schedule?: Yes, and we would rather commit to a sequence than a single date. We tell you what must be complete before we start, roughly how long each stage takes, and what would push it — so if something slips, you know early.
What finish level should a new Pembina home be?: Most living areas are well served by a standard finish; large walls with raking window light and feature areas justify going higher. We will tell you which walls in your plan actually justify the upgrade rather than pricing the whole house at the top level.
Do you offer Level 5 finishing for new Pembina builds?: Yes — we finish new construction to a flat Level 4 or, where the paint spec calls for it, a full Level 5 skim on feature areas in your Pembina build.
Can you finish a Pembina new build to Level 5?: Yes — we finish new construction to a flat Level 4 or, where the paint spec calls for it, a full Level 5 skim on feature areas in your Pembina build.
Does the Pembina board spec follow code requirements?: Yes — Pembina separations get fire-rated board; wet areas get moisture-resistant. We board your Pembina project to spec so it passes inspection.
Do you coordinate with my other trades in Pembina?: Yes — we slot into the build schedule and coordinate with framers, electricians and plumbers so the drywall stage keeps your Pembina project moving.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

New Construction Drywall Pembina Edmonton

Boarding and finishing a new Pembina build with one crew