Does the Maple board spec follow code requirements?

Yes — Maple separations get fire-rated board; wet areas get moisture-resistant. We board your Maple project to spec so it passes inspection.

Do you stand behind your new construction drywall in Maple?

Yes. We walk the finished Maple job with you before we hand it off for paint, and if something is not right we come back and make it right.

Do you do new construction drywall in Maple?

Yes — new construction and additions in Maple are part of our regular work, and we book to your build schedule. We also cover Bisset, Crawford Plains, Daly Grove and Mill Woods and Meadows.

Will the correct board go where Maple code demands it?

Yes — Type X where Maple garages and suites meet the house, moisture-resistant board in wet zones. We board your Maple project to spec so it passes inspection.

Can you work in an Alberta winter?

Yes, if the building can hold a steady temperature through the taping stage with ventilation to carry moisture off. Compound will not cure in a cold building, and forcing it produces joints that crack once the heat goes on.

What finish level should a new home be?

Most rooms are well served by Level 4; great rooms, tall entries and walls with a window running down them justify Level 5. It is a framing-stage decision because deciding late compresses the coats and causes cracking.

New Construction Drywall Maple Edmonton | New Build Taping

New construction drywall in Maple, boarded and finished right

The drywall makes or breaks a new Maple build — get the boarding square, the tape tight and the finish flat and everything after goes smoothly. In Maple we board, tape, mud and finish new construction to a smooth Level 4 or 5, with fire-rated, moisture-resistant and soundproof board wherever the plan calls for it. Maple is this established Mill Woods and Meadows community where reno, repair and ceiling drywall are common, so new-construction work here is steady. We cover Maple, Bisset, Crawford Plains, Daly Grove and Mill Woods and Meadows, 7 days a week.

Full new-build boarding and finishing in Maple
Maple coverage — we come to you
Coordinated with your other trades and timeline
Additions, infills and second-storey builds
Level 4 or Level 5 finishing
Fire-rated, moisture-resistant and soundproof board to spec
Basement and secondary-suite drywall

Punch list and callbacks

Expect some

On a house-sized job there will be a short list after the trades that follow us bang, drill and load things in.

How we handle it

One consolidated visit once the other trades are clear, rather than repeated trips that get in everyone's way. We would rather come once at the right time than five times at the wrong ones.

Why Maple homeowners and builders trust Emplastrum

Showhome-standard finishing

We are a mudding and taping specialist, so the finish on your Maple new build is the same standard we put on showhomes across Edmonton — flat, clean and ready for paint.

Fixed price, on schedule

We do new construction drywall across Maple and Mill Woods and Meadows, 7 days a week. You get the Maple number before we start, a tidy site, coordinated trades and backed work. Any issue on an Maple job earns a return trip and a proper fix.

Ceilings first, then walls

Standard for a reason

Ceiling board goes up first so the wall sheets support its edges. Reversing it leaves the ceiling perimeter unsupported and produces cracking at the wall junction.

On a new Maple build

It also lets the crew work overhead while the floor is clear, which is faster and safer than working around stacked wall board.

Temperature and humidity on an Maple site

Compound needs conditions

Joint compound will not cure properly in a cold building, and forcing it produces joints that shrink and crack after the heat goes on.

What we need

A building that can hold a steady temperature through the taping stage, with ventilation to carry moisture away. In an Alberta winter that means temporary heat planned into the schedule rather than assumed.

Site protection and cleanup on a new build

Not an empty shell for long

By the time we are boarding, an Maple build often has windows, some flooring substrate and finished mechanical in place.

What we protect

Floors, window frames, stair treads and any installed fixtures. Drywall debris and compound left to dry on a subfloor is a cost transferred to the flooring trade, and builders remember which crews do that.

Garage and mechanical room assemblies

Rated, not just boarded

The garage ceiling under living space, the garage-to-house wall and the furnace room usually need rated assemblies on an Maple build.

Inspected before covered

Those are inspected before the finish goes on, so they are sequenced to the inspection rather than boarded ahead. It is also the assembly most often found incomplete later — board up, joints untaped.

How it works

Simple, clean, on schedule — New Construction Drywall in Maple Edmonton

Free quote

We come out to your Maple Edmonton property, take a real look at the new construction drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every new construction drywall quote in Maple Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the new construction drywall in Maple Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Maple Edmonton home while we finish the new construction drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished new construction drywall with us and you're happy with the result in Maple Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the new construction drywall contractor Maple Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your new construction drywall project in Maple Edmonton.

Read our reviews on Google

FAQ — New Construction Drywall Maple Edmonton

New Construction Drywall Maple Edmonton: your questions answered

Does the Maple board spec follow code requirements?: Yes — Maple separations get fire-rated board; wet areas get moisture-resistant. We board your Maple project to spec so it passes inspection.
Do you stand behind your new construction drywall in Maple in Edmonton?: Yes. We walk the finished Maple job with you before we hand it off for paint, and if something is not right we come back and make it right.
Do you do new construction drywall in Maple in Edmonton?: Yes — new construction and additions in Maple are part of our regular work, and we book to your build schedule. We also cover Bisset, Crawford Plains, Daly Grove and Mill Woods and Meadows.
Will the correct board go where Maple code demands it?: Yes — Type X where Maple garages and suites meet the house, moisture-resistant board in wet zones. We board your Maple project to spec so it passes inspection.
Can you work in an Alberta winter?: Yes, if the building can hold a steady temperature through the taping stage with ventilation to carry moisture off. Compound will not cure in a cold building, and forcing it produces joints that crack once the heat goes on.
What finish level should a new home be?: Most rooms are well served by Level 4; great rooms, tall entries and walls with a window running down them justify Level 5. It is a framing-stage decision because deciding late compresses the coats and causes cracking.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

New Construction Drywall Maple Edmonton

New construction drywall in Maple, boarded and finished right