When in the build should drywall start?

After framing, mechanical rough-in and insulation have passed inspection, and after the building is closed in and can hold a stable temperature. Boarding before those are signed off risks covering something an inspector needs to see.

Will the correct board go where Lansdowne code demands it?

Yes — Type X where Lansdowne garages and suites meet the house, moisture-resistant board in wet zones. We board your Lansdowne project to spec so it passes inspection.

Do you hang and finish, or just one?

Both, with one crew. The common failure on a Lansdowne build is a handoff between a boarding crew and a taping crew, where poor hanging becomes the finisher problem and nobody owns it. One crew removes that argument.

Can you work to our construction schedule?

Yes, and we would rather commit to a sequence than a single date. We tell you what must be complete before we start, roughly how long each stage takes, and what would push it — so if something slips, you know early.

What finish level should a new home be?

Most rooms are well served by Level 4; great rooms, tall entries and walls with a window running down them justify Level 5. It is a framing-stage decision because deciding late compresses the coats and causes cracking.

Does the Lansdowne board spec follow code requirements?

Yes — Lansdowne separations get fire-rated board; wet areas get moisture-resistant. We board your Lansdowne project to spec so it passes inspection.

New Construction Drywall Lansdowne Edmonton | New Build Taping

New construction drywall in Lansdowne, boarded and finished right

The drywall makes or breaks a new Lansdowne build — get the boarding square, the tape tight and the finish flat and everything after goes smoothly. In Lansdowne we board, tape, mud and finish new construction to a smooth Level 4 or 5, with fire-rated, moisture-resistant and soundproof board wherever the plan calls for it. Lansdowne is this established Scona community where reno, repair and ceiling drywall are common, so new-construction work here is steady. We cover Lansdowne, Allendale, Argyll, Belgravia and Scona, 7 days a week.

Additions, infills and second-storey builds
Fire-rated, moisture-resistant and soundproof board to spec
Basement and secondary-suite drywall
Lansdowne coverage — we come to you
Full new-build boarding and finishing in Lansdowne
Coordinated with your other trades and timeline
Level 4 or Level 5 finishing

Screw patterns and what an inspector checks

Spacing is specified

Fastener spacing on ceilings and walls is set by the assembly, and it is checked. Under-screwing shows up later as nail pops and cracked joints.

Depth matters too

A screw driven through the paper face has lost its grip and becomes a defect. Set correctly it dimples the surface without breaking it. It is unglamorous and it is most of what a good hanging crew is being paid for.

Lansdowne drywall in context

About Lansdowne

Residents of Lansdowne enjoy a quiet pastoral atmosphere and the opportunity to view the rural, agricultural setting of the University of Alberta Farm from the bicycle path through the eastern portion of the farm.

What we see in Lansdowne

In Lansdowne the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

What affects the cost of new construction drywall in Lansdowne in Edmonton?

Size, board spec and finish level

The cost in Lansdowne depends on the square footage, the board spec (fire-rated, moisture-resistant and soundproof board cost more than standard), and the finish level — a Level 5 is more skim work than a Level 4. We price off the plans and a site look.

Spec done right in Lansdowne

We put the right board where the plan and code call for it — fire-rated on garage and suite separations, moisture-resistant in wet areas — so your Lansdowne build passes inspection the first time.

Ceilings first, then walls

Standard for a reason

Ceiling board goes up first so the wall sheets support its edges. Reversing it leaves the ceiling perimeter unsupported and produces cracking at the wall junction.

On a new Lansdowne build

It also lets the crew work overhead while the floor is clear, which is faster and safer than working around stacked wall board.

Why Lansdowne homeowners and builders trust Emplastrum

Showhome-standard finishing

We are a mudding and taping specialist, so the finish on your Lansdowne new build is the same standard we put on showhomes across Edmonton — flat, clean and ready for paint.

Fixed price, on schedule

We do new construction drywall across Lansdowne and Scona, 7 days a week. You get the Lansdowne number before we start, a tidy site, coordinated trades and backed work. Any issue on an Lansdowne job earns a return trip and a proper fix.

What has to be complete before we start

The gate list

Framing signed off, mechanical and electrical rough-in inspected, insulation and vapour barrier in and passed, and the building closed in and able to hold temperature.

Why we insist

Boarding over an uninspected rough-in means opening a finished wall. On an Lansdowne build that is days lost and a trade relationship damaged, so we would rather hold a start date than take one that is not ready.

Corner bead and the edges people notice

Where a house looks built or thrown up

Outside corners take the abuse and are what the eye follows. Metal, paper-faced or vinyl bead each behave differently, and the choice matters more in a house with children or pets.

Archways and bullnose

Curved and bullnose corners are slower and are priced accordingly. Deciding on them at framing rather than at taping keeps the Lansdowne schedule intact.

How it works

Simple, clean, on schedule — New Construction Drywall in Lansdowne Edmonton

Free quote

We come out to your Lansdowne Edmonton property, take a real look at the new construction drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every new construction drywall quote in Lansdowne Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the new construction drywall in Lansdowne Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Lansdowne Edmonton home while we finish the new construction drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished new construction drywall with us and you're happy with the result in Lansdowne Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the new construction drywall contractor Lansdowne Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your new construction drywall project in Lansdowne Edmonton.

Read our reviews on Google

FAQ — New Construction Drywall Lansdowne Edmonton

New Construction Drywall Lansdowne Edmonton: your questions answered

When in the build should drywall start?: After framing, mechanical rough-in and insulation have passed inspection, and after the building is closed in and can hold a stable temperature. Boarding before those are signed off risks covering something an inspector needs to see.
Will the correct board go where Lansdowne code demands it?: Yes — Type X where Lansdowne garages and suites meet the house, moisture-resistant board in wet zones. We board your Lansdowne project to spec so it passes inspection.
Do you hang and finish, or just one?: Both, with one crew. The common failure on a Lansdowne build is a handoff between a boarding crew and a taping crew, where poor hanging becomes the finisher problem and nobody owns it. One crew removes that argument.
Can you work to our construction schedule?: Yes, and we would rather commit to a sequence than a single date. We tell you what must be complete before we start, roughly how long each stage takes, and what would push it — so if something slips, you know early.
What finish level should a new home be?: Most rooms are well served by Level 4; great rooms, tall entries and walls with a window running down them justify Level 5. It is a framing-stage decision because deciding late compresses the coats and causes cracking.
Does the Lansdowne board spec follow code requirements?: Yes — Lansdowne separations get fire-rated board; wet areas get moisture-resistant. We board your Lansdowne project to spec so it passes inspection.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

New Construction Drywall Lansdowne Edmonton

New construction drywall in Lansdowne, boarded and finished right