Can you work to our construction schedule?

Yes, and we would rather commit to a sequence than a single date. We tell you what must be complete before we start, roughly how long each stage takes, and what would push it — so if something slips, you know early.

Do you stand behind your new construction drywall in Kensington?

Yes. We walk the finished Kensington job with you before we hand it off for paint, and if something is not right we come back and make it right.

Will the correct board go where Kensington code demands it?

Yes — Type X where Kensington garages and suites meet the house, moisture-resistant board in wet zones. We board your Kensington project to spec so it passes inspection.

Do you hang and finish, or just one?

Both, with one crew. The common failure on a Kensington build is a handoff between a boarding crew and a taping crew, where poor hanging becomes the finisher problem and nobody owns it. One crew removes that argument.

What finish level should a new home be?

Most rooms are well served by Level 4; great rooms, tall entries and walls with a window running down them justify Level 5. It is a framing-stage decision because deciding late compresses the coats and causes cracking.

Do you offer Level 5 finishing for new Kensington builds?

Yes — we finish new construction to a flat Level 4 or, where the paint spec calls for it, a full Level 5 skim on feature areas in your Kensington build.

New Construction Drywall Kensington Edmonton | New Build Taping

New construction drywall in Kensington, on schedule

The drywall makes or breaks a new Kensington build — get the boarding square, the tape tight and the finish flat and everything after goes smoothly. In Kensington we board, tape, mud and finish new construction to a smooth Level 4 or 5, with fire-rated, moisture-resistant and soundproof board wherever the plan calls for it. Kensington is this established Northwest community where reno, repair and ceiling drywall are common, so new-construction work here is steady. We cover Kensington, Albany, Athlone, Baranow and Northwest, 7 days a week.

Additions, infills and second-storey builds
Level 4 or Level 5 finishing
Full new-build boarding and finishing in Kensington
Basement and secondary-suite drywall
Coordinated with your other trades and timeline
Kensington coverage — we come to you
Fire-rated, moisture-resistant and soundproof board to spec

Level of finish, room by room

Match it to the light

Most Kensington rooms are well served by Level 4. Great rooms, tall entries and any wall with a window running down it justify Level 5.

Deciding at the right time

This is a framing-stage decision, not a taping-stage one, because it changes the schedule. Deciding late compresses the coats at exactly the point where compression causes cracks.

Kensington drywall in context

About Kensington

Kensington was annexed to the City in 1913 during a real estate boom but most development didn't occur until the 1950s.

What we see in Kensington

In Kensington the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Corner bead and the edges people notice

Where a house looks built or thrown up

Outside corners take the abuse and are what the eye follows. Metal, paper-faced or vinyl bead each behave differently, and the choice matters more in a house with children or pets.

Archways and bullnose

Curved and bullnose corners are slower and are priced accordingly. Deciding on them at framing rather than at taping keeps the Kensington schedule intact.

Temperature and humidity on an Kensington site

Compound needs conditions

Joint compound will not cure properly in a cold building, and forcing it produces joints that shrink and crack after the heat goes on.

What we need

A building that can hold a steady temperature through the taping stage, with ventilation to carry moisture away. In an Alberta winter that means temporary heat planned into the schedule rather than assumed.

What affects the cost of new construction drywall in Kensington in Edmonton?

Size, board spec and finish level

The cost in Kensington depends on the square footage, the board spec (fire-rated, moisture-resistant and soundproof board cost more than standard), and the finish level — a Level 5 is more skim work than a Level 4. We price off the plans and a site look.

Spec done right in Kensington

We put the right board where the plan and code call for it — fire-rated on garage and suite separations, moisture-resistant in wet areas — so your Kensington build passes inspection the first time.

Boarding new builds, additions and suites in Kensington

New homes and additions

In Kensington we board and finish complete new homes, additions and infills, coordinating with framers, electricians and plumbers so the drywall stage keeps the build on schedule.

Basements and secondary suites

Basement development and secondary suites are common — we board these with fire-rated and soundproof assemblies to the suite spec. Kensington projects can also draw on Legal Suite Drywall Edmonton and Basement Drywall Edmonton.

Board layout, and why it decides the finish

Fewer joints, better wall

Hanging board to minimise joints — especially butt joints, which have no factory taper — makes the biggest single difference to how a finished Kensington wall looks.

Sheet length matters

Longer sheets cost slightly more and eliminate joints. On a long hallway or a great room wall that trade is worth making, and it is a decision made at ordering, not at taping.

How it works

Simple, clean, on schedule — New Construction Drywall in Kensington Edmonton

Free quote

We come out to your Kensington Edmonton property, take a real look at the new construction drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every new construction drywall quote in Kensington Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the new construction drywall in Kensington Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Kensington Edmonton home while we finish the new construction drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished new construction drywall with us and you're happy with the result in Kensington Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the new construction drywall contractor Kensington Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your new construction drywall project in Kensington Edmonton.

Read our reviews on Google

FAQ — New Construction Drywall Kensington Edmonton

New Construction Drywall Kensington Edmonton: your questions answered

Can you work to our construction schedule?: Yes, and we would rather commit to a sequence than a single date. We tell you what must be complete before we start, roughly how long each stage takes, and what would push it — so if something slips, you know early.
Do you stand behind your new construction drywall in Kensington in Edmonton?: Yes. We walk the finished Kensington job with you before we hand it off for paint, and if something is not right we come back and make it right.
Will the correct board go where Kensington code demands it?: Yes — Type X where Kensington garages and suites meet the house, moisture-resistant board in wet zones. We board your Kensington project to spec so it passes inspection.
Do you hang and finish, or just one?: Both, with one crew. The common failure on a Kensington build is a handoff between a boarding crew and a taping crew, where poor hanging becomes the finisher problem and nobody owns it. One crew removes that argument.
What finish level should a new home be?: Most rooms are well served by Level 4; great rooms, tall entries and walls with a window running down them justify Level 5. It is a framing-stage decision because deciding late compresses the coats and causes cracking.
Do you offer Level 5 finishing for new Kensington builds?: Yes — we finish new construction to a flat Level 4 or, where the paint spec calls for it, a full Level 5 skim on feature areas in your Kensington build.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

New Construction Drywall Kensington Edmonton

New construction drywall in Kensington, on schedule