Will the joints crack as the house settles?

Some hairline movement in the first year is normal in a new Kenilworth house. Correct fastener spacing, joints on framing and unrushed coats reduce it. Anyone promising no settlement cracking is promising what they cannot deliver.

What finish level should a new home be?

Most rooms are well served by Level 4; great rooms, tall entries and walls with a window running down them justify Level 5. It is a framing-stage decision because deciding late compresses the coats and causes cracking.

Does the Kenilworth board spec follow code requirements?

Yes — Kenilworth separations get fire-rated board; wet areas get moisture-resistant. We board your Kenilworth project to spec so it passes inspection.

Do you do new construction drywall in Kenilworth?

Yes — new construction and additions in Kenilworth are part of our regular work, and we book to your build schedule. We also cover Avonmore, Bonnie Doon, Capilano and Southeast.

Do you stand behind your new construction drywall in Kenilworth?

Yes. We walk the finished Kenilworth job with you before we hand it off for paint, and if something is not right we come back and make it right.

What finish level should a new Kenilworth home be?

Most living areas are well served by a standard finish; large walls with raking window light and feature areas justify going higher. We will tell you which walls in your plan actually justify the upgrade rather than pricing the whole house at the top level.

New Construction Drywall Kenilworth Edmonton | New Build Taping

New construction drywall in Kenilworth, on schedule

On a new build in Kenilworth the drywall stage is where the schedule is either held or lost. Board goes on after the mechanical and insulation inspections and before the finishing trades, so slipping it moves everyone behind you. We quote a sequence, not just a price, and we tell you what has to be complete before we can start.

Kenilworth coverage — we come to you
Fire-rated, moisture-resistant and soundproof board to spec
Additions, infills and second-storey builds
Level 4 or Level 5 finishing
Basement and secondary-suite drywall
Coordinated with your other trades and timeline
Full new-build boarding and finishing in Kenilworth

Why Kenilworth homeowners and builders trust Emplastrum

Showhome-standard finishing

We are a mudding and taping specialist, so the finish on your Kenilworth new build is the same standard we put on showhomes across Edmonton — flat, clean and ready for paint.

Fixed price, on schedule

We do new construction drywall across Kenilworth and Southeast, 7 days a week. You get the Kenilworth number before we start, a tidy site, coordinated trades and backed work. Any issue on an Kenilworth job earns a return trip and a proper fix.

Kenilworth drywall in context

About Kenilworth

Kenilworth lies in the City's southeast, immediately north of the vibrant Whyte Avenue.

What we see in Kenilworth

In Kenilworth the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Screw patterns and what an inspector checks

Spacing is specified

Fastener spacing on ceilings and walls is set by the assembly, and it is checked. Under-screwing shows up later as nail pops and cracked joints.

Depth matters too

A screw driven through the paper face has lost its grip and becomes a defect. Set correctly it dimples the surface without breaking it. It is unglamorous and it is most of what a good hanging crew is being paid for.

Ceilings first, then walls

Standard for a reason

Ceiling board goes up first so the wall sheets support its edges. Reversing it leaves the ceiling perimeter unsupported and produces cracking at the wall junction.

On a new Kenilworth build

It also lets the crew work overhead while the floor is clear, which is faster and safer than working around stacked wall board.

Expansion, movement and a new house settling

New builds move

An Kenilworth house dries out and settles through its first year. Some hairline cracking at joints is normal rather than a defect.

What reduces it

Correct fastener spacing, joints landing on framing, control joints on long runs and not rushing the coats. What eliminates it is nothing — and a builder who promises no settlement cracking is promising something they cannot deliver.

Corner bead and the edges people notice

Where a house looks built or thrown up

Outside corners take the abuse and are what the eye follows. Metal, paper-faced or vinyl bead each behave differently, and the choice matters more in a house with children or pets.

Archways and bullnose

Curved and bullnose corners are slower and are priced accordingly. Deciding on them at framing rather than at taping keeps the Kenilworth schedule intact.

Garage and mechanical room assemblies

Rated, not just boarded

The garage ceiling under living space, the garage-to-house wall and the furnace room usually need rated assemblies on an Kenilworth build.

Inspected before covered

Those are inspected before the finish goes on, so they are sequenced to the inspection rather than boarded ahead. It is also the assembly most often found incomplete later — board up, joints untaped.

How it works

Simple, clean, on schedule — New Construction Drywall in Kenilworth Edmonton

Free quote

We come out to your Kenilworth Edmonton property, take a real look at the new construction drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every new construction drywall quote in Kenilworth Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the new construction drywall in Kenilworth Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Kenilworth Edmonton home while we finish the new construction drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished new construction drywall with us and you're happy with the result in Kenilworth Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the new construction drywall contractor Kenilworth Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your new construction drywall project in Kenilworth Edmonton.

Read our reviews on Google

FAQ — New Construction Drywall Kenilworth Edmonton

New Construction Drywall Kenilworth Edmonton: your questions answered

Will the joints crack as the house settles?: Some hairline movement in the first year is normal in a new Kenilworth house. Correct fastener spacing, joints on framing and unrushed coats reduce it. Anyone promising no settlement cracking is promising what they cannot deliver.
What finish level should a new home be?: Most rooms are well served by Level 4; great rooms, tall entries and walls with a window running down them justify Level 5. It is a framing-stage decision because deciding late compresses the coats and causes cracking.
Does the Kenilworth board spec follow code requirements?: Yes — Kenilworth separations get fire-rated board; wet areas get moisture-resistant. We board your Kenilworth project to spec so it passes inspection.
Do you do new construction drywall in Kenilworth in Edmonton?: Yes — new construction and additions in Kenilworth are part of our regular work, and we book to your build schedule. We also cover Avonmore, Bonnie Doon, Capilano and Southeast.
Do you stand behind your new construction drywall in Kenilworth in Edmonton?: Yes. We walk the finished Kenilworth job with you before we hand it off for paint, and if something is not right we come back and make it right.
What finish level should a new Kenilworth home be?: Most living areas are well served by a standard finish; large walls with raking window light and feature areas justify going higher. We will tell you which walls in your plan actually justify the upgrade rather than pricing the whole house at the top level.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

New Construction Drywall Kenilworth Edmonton

New construction drywall in Kenilworth, on schedule