Do you coordinate with my other trades in Inglewood?

Yes — we slot into the build schedule and coordinate with framers, electricians and plumbers so the drywall stage keeps your Inglewood project moving.

Do you hang and finish, or just one?

Both, with one crew. The common failure on a Inglewood build is a handoff between a boarding crew and a taping crew, where poor hanging becomes the finisher problem and nobody owns it. One crew removes that argument.

Do you install the right board where code requires it in Inglewood?

Yes — fire-rated board on Inglewood garage and suite separations, moisture-resistant in wet areas. We board your Inglewood project to spec so it passes inspection.

Will the joints crack as the house settles?

Some hairline movement in the first year is normal in a new Inglewood house. Correct fastener spacing, joints on framing and unrushed coats reduce it. Anyone promising no settlement cracking is promising what they cannot deliver.

What finish level should a new home be?

Most rooms are well served by Level 4; great rooms, tall entries and walls with a window running down them justify Level 5. It is a framing-stage decision because deciding late compresses the coats and causes cracking.

Will the correct board go where Inglewood code demands it?

Yes — Type X where Inglewood garages and suites meet the house, moisture-resistant board in wet zones. We board your Inglewood project to spec so it passes inspection.

New Construction Drywall Inglewood Edmonton | New Build Taping

New construction drywall in Inglewood, boarded and finished right

The drywall makes or breaks a new Inglewood build — get the boarding square, the tape tight and the finish flat and everything after goes smoothly. In Inglewood we board, tape, mud and finish new construction to a smooth Level 4 or 5, with fire-rated, moisture-resistant and soundproof board wherever the plan calls for it. Inglewood is this established Central community where reno, repair and ceiling drywall are common, so new-construction work here is steady. We cover Inglewood, Boyle Street, Central McDougall, Dovercourt and Central, 7 days a week.

Additions, infills and second-storey builds
Basement and secondary-suite drywall
Level 4 or Level 5 finishing
Coordinated with your other trades and timeline
Fire-rated, moisture-resistant and soundproof board to spec
Inglewood coverage — we come to you
Full new-build boarding and finishing in Inglewood

Handing over to the painter

What paint-ready actually means

Sanded, dust removed, edges cut clean, and any defect the painter would otherwise find dealt with first.

The walkthrough

We would rather walk an Inglewood house with the painter before they start than receive a list afterwards. Most disputes between the two trades are about surfaces neither inspected together, and ten minutes at handover prevents them.

Inglewood drywall in context

About Inglewood

The name Inglewood was used on a 1905 plan of subdivision and is now applied to the neighbourhood.

What we see in Inglewood

In Inglewood the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Our Inglewood new construction process, step by step

Board square and to spec

A clean finish in Inglewood starts with boarding — we hang square and tight, stagger joints and put the right board type on every surface the plan specifies.

Tape, coat and finish

We tape, apply mud coats with full drying time between each, then sand to a flat Level 4 or 5. New-build drywall that cracks or telegraphs seams usually had its coats rushed; the Inglewood schedule allows full drying, plus a light check before paint.

Ceilings first, then walls

Standard for a reason

Ceiling board goes up first so the wall sheets support its edges. Reversing it leaves the ceiling perimeter unsupported and produces cracking at the wall junction.

On a new Inglewood build

It also lets the crew work overhead while the floor is clear, which is faster and safer than working around stacked wall board.

One crew hanging and finishing

Removing the handoff

The common failure on an Inglewood build is a boarding crew and a taping crew with a gap between them: poor hanging becomes the finisher's problem, and nobody owns it.

What that changes

When the crew that finishes also hangs, the layout decisions are made by the people who will have to hide them. It also removes a scheduling gap where a build typically loses a week.

Site protection and cleanup on a new build

Not an empty shell for long

By the time we are boarding, an Inglewood build often has windows, some flooring substrate and finished mechanical in place.

What we protect

Floors, window frames, stair treads and any installed fixtures. Drywall debris and compound left to dry on a subfloor is a cost transferred to the flooring trade, and builders remember which crews do that.

Corner bead and the edges people notice

Where a house looks built or thrown up

Outside corners take the abuse and are what the eye follows. Metal, paper-faced or vinyl bead each behave differently, and the choice matters more in a house with children or pets.

Archways and bullnose

Curved and bullnose corners are slower and are priced accordingly. Deciding on them at framing rather than at taping keeps the Inglewood schedule intact.

How it works

Simple, clean, on schedule — New Construction Drywall in Inglewood Edmonton

Free quote

We come out to your Inglewood Edmonton property, take a real look at the new construction drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every new construction drywall quote in Inglewood Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the new construction drywall in Inglewood Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Inglewood Edmonton home while we finish the new construction drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished new construction drywall with us and you're happy with the result in Inglewood Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the new construction drywall contractor Inglewood Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your new construction drywall project in Inglewood Edmonton.

Read our reviews on Google

FAQ — New Construction Drywall Inglewood Edmonton

New Construction Drywall Inglewood Edmonton: your questions answered

Do you coordinate with my other trades in Inglewood?: Yes — we slot into the build schedule and coordinate with framers, electricians and plumbers so the drywall stage keeps your Inglewood project moving.
Do you hang and finish, or just one?: Both, with one crew. The common failure on a Inglewood build is a handoff between a boarding crew and a taping crew, where poor hanging becomes the finisher problem and nobody owns it. One crew removes that argument.
Do you install the right board where code requires it in Inglewood?: Yes — fire-rated board on Inglewood garage and suite separations, moisture-resistant in wet areas. We board your Inglewood project to spec so it passes inspection.
Will the joints crack as the house settles?: Some hairline movement in the first year is normal in a new Inglewood house. Correct fastener spacing, joints on framing and unrushed coats reduce it. Anyone promising no settlement cracking is promising what they cannot deliver.
What finish level should a new home be?: Most rooms are well served by Level 4; great rooms, tall entries and walls with a window running down them justify Level 5. It is a framing-stage decision because deciding late compresses the coats and causes cracking.
Will the correct board go where Inglewood code demands it?: Yes — Type X where Inglewood garages and suites meet the house, moisture-resistant board in wet zones. We board your Inglewood project to spec so it passes inspection.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

New Construction Drywall Inglewood Edmonton

New construction drywall in Inglewood, boarded and finished right