Do you install the right board where code requires it in Fulton Place?

Yes — fire-rated board on Fulton Place garage and suite separations, moisture-resistant in wet areas. We board your Fulton Place project to spec so it passes inspection.

Can you keep to our construction schedule?

We quote a sequence with durations rather than a single date, tell you what must be complete before we start, and flag early if something slips. That is more useful than a confident date that moves twice.

Will the joints crack as the house settles?

Some hairline movement in the first year is normal in a new Fulton Place house. Correct fastener spacing, joints on framing and unrushed coats reduce it. Anyone promising no settlement cracking is promising what they cannot deliver.

When in the build should drywall start?

After framing, mechanical rough-in and insulation have passed inspection, and after the building is closed in and can hold a stable temperature. Boarding before those are signed off risks covering something an inspector needs to see.

Do you stand behind your new construction drywall in Fulton Place?

Yes. We walk the finished Fulton Place job with you before we hand it off for paint, and if something is not right we come back and make it right.

Does the Fulton Place board spec follow code requirements?

Yes — Fulton Place separations get fire-rated board; wet areas get moisture-resistant. We board your Fulton Place project to spec so it passes inspection.

New Construction Drywall Fulton Place Edmonton | New Build Taping

New build drywall in Fulton Place that does not hold up the trades

On a Fulton Place new build the drywall sets everything: square boarding, tight taping and a flat finish let paint and trim land right. In Fulton Place we board, tape, mud and finish new construction to a smooth Level 4 or 5, with fire-rated, moisture-resistant and soundproof board wherever the plan calls for it. Fulton Place is an Southeast community with a mix of older homes and newer builds, so new-construction work here is steady. We cover Fulton Place, Avonmore, Bonnie Doon, Capilano and Southeast, 7 days a week.

Basement and secondary-suite drywall
Full new-build boarding and finishing in Fulton Place
Coordinated with your other trades and timeline
Fulton Place coverage — we come to you
Level 4 or Level 5 finishing
Additions, infills and second-storey builds
Fire-rated, moisture-resistant and soundproof board to spec

Choosing board for each room

Not all one product

A new Fulton Place home typically needs standard board through most rooms, moisture-resistant in bathrooms and laundry, Type X in the garage assembly and any rated separation, and sometimes acoustic assemblies in bedrooms or a theatre.

Ordered by room

Getting that mix right at ordering avoids the substitution that happens when the wrong board is what is on site.

Fulton Place drywall in context

About Fulton Place

Named for the creek which runs through the ravine on its west boundary, Fulton Place lies east of the downtown core and developed in the 1950s.

What we see in Fulton Place

In Fulton Place the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Expansion, movement and a new house settling

New builds move

An Fulton Place house dries out and settles through its first year. Some hairline cracking at joints is normal rather than a defect.

What reduces it

Correct fastener spacing, joints landing on framing, control joints on long runs and not rushing the coats. What eliminates it is nothing — and a builder who promises no settlement cracking is promising something they cannot deliver.

Our Fulton Place new construction process, step by step

Board square and to spec

A clean finish in Fulton Place starts with boarding — we hang square and tight, stagger joints and put the right board type on every surface the plan specifies.

Tape, coat and finish

We tape, apply mud coats with full drying time between each, then sand to a flat Level 4 or 5. New-build drywall that cracks or telegraphs seams usually had its coats rushed; the Fulton Place schedule allows full drying, plus a light check before paint.

Corner bead and the edges people notice

Where a house looks built or thrown up

Outside corners take the abuse and are what the eye follows. Metal, paper-faced or vinyl bead each behave differently, and the choice matters more in a house with children or pets.

Archways and bullnose

Curved and bullnose corners are slower and are priced accordingly. Deciding on them at framing rather than at taping keeps the Fulton Place schedule intact.

Handing over to the painter

What paint-ready actually means

Sanded, dust removed, edges cut clean, and any defect the painter would otherwise find dealt with first.

The walkthrough

We would rather walk an Fulton Place house with the painter before they start than receive a list afterwards. Most disputes between the two trades are about surfaces neither inspected together, and ten minutes at handover prevents them.

Why Fulton Place homeowners and builders trust Emplastrum

Showhome-standard finishing

We are a mudding and taping specialist, so the finish on your Fulton Place new build is the same standard we put on showhomes across Edmonton — flat, clean and ready for paint.

Fixed price, on schedule

We do new construction drywall across Fulton Place and Southeast, 7 days a week. You get the Fulton Place number before we start, a tidy site, coordinated trades and backed work. Any issue on an Fulton Place job earns a return trip and a proper fix.

How it works

Simple, clean, on schedule — New Construction Drywall in Fulton Place Edmonton

Free quote

We come out to your Fulton Place Edmonton property, take a real look at the new construction drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every new construction drywall quote in Fulton Place Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the new construction drywall in Fulton Place Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Fulton Place Edmonton home while we finish the new construction drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished new construction drywall with us and you're happy with the result in Fulton Place Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the new construction drywall contractor Fulton Place Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your new construction drywall project in Fulton Place Edmonton.

Read our reviews on Google

FAQ — New Construction Drywall Fulton Place Edmonton

New Construction Drywall Fulton Place Edmonton: your questions answered

Do you install the right board where code requires it in Fulton Place?: Yes — fire-rated board on Fulton Place garage and suite separations, moisture-resistant in wet areas. We board your Fulton Place project to spec so it passes inspection.
Can you keep to our construction schedule?: We quote a sequence with durations rather than a single date, tell you what must be complete before we start, and flag early if something slips. That is more useful than a confident date that moves twice.
Will the joints crack as the house settles?: Some hairline movement in the first year is normal in a new Fulton Place house. Correct fastener spacing, joints on framing and unrushed coats reduce it. Anyone promising no settlement cracking is promising what they cannot deliver.
When in the build should drywall start?: After framing, mechanical rough-in and insulation have passed inspection, and after the building is closed in and can hold a stable temperature. Boarding before those are signed off risks covering something an inspector needs to see.
Do you stand behind your new construction drywall in Fulton Place in Edmonton?: Yes. We walk the finished Fulton Place job with you before we hand it off for paint, and if something is not right we come back and make it right.
Does the Fulton Place board spec follow code requirements?: Yes — Fulton Place separations get fire-rated board; wet areas get moisture-resistant. We board your Fulton Place project to spec so it passes inspection.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

New Construction Drywall Fulton Place Edmonton

New build drywall in Fulton Place that does not hold up the trades