Do you install the right board where code requires it in Fraser?

Yes — fire-rated board on Fraser garage and suite separations, moisture-resistant in wet areas. We board your Fraser project to spec so it passes inspection.

Can you work in an Alberta winter?

Yes, if the building can hold a steady temperature through the taping stage with ventilation to carry moisture off. Compound will not cure in a cold building, and forcing it produces joints that crack once the heat goes on.

Do you offer Level 5 finishing for new Fraser builds?

Yes — we finish new construction to a flat Level 4 or, where the paint spec calls for it, a full Level 5 skim on feature areas in your Fraser build.

Will the correct board go where Fraser code demands it?

Yes — Type X where Fraser garages and suites meet the house, moisture-resistant board in wet zones. We board your Fraser project to spec so it passes inspection.

Will the joints crack as the house settles?

Some hairline movement in the first year is normal in a new Fraser house. Correct fastener spacing, joints on framing and unrushed coats reduce it. Anyone promising no settlement cracking is promising what they cannot deliver.

New Construction Drywall Fraser Edmonton | New Build Taping

New construction drywall in Fraser, on schedule

On a Fraser new build the drywall sets everything: square boarding, tight taping and a flat finish let paint and trim land right. In Fraser we board, tape, mud and finish new construction to a smooth Level 4 or 5, with fire-rated, moisture-resistant and soundproof board wherever the plan calls for it. Fraser is an Northeast community with a mix of older homes and newer builds, so new-construction work here is steady. We cover Fraser, Balwin, Bannerman, Belmont and Northeast, 7 days a week.

Fire-rated, moisture-resistant and soundproof board to spec
Basement and secondary-suite drywall
Full new-build boarding and finishing in Fraser
Additions, infills and second-storey builds
Fraser coverage — we come to you
Level 4 or Level 5 finishing
Coordinated with your other trades and timeline

Punch list and callbacks

Expect some

On a house-sized job there will be a short list after the trades that follow us bang, drill and load things in.

How we handle it

One consolidated visit once the other trades are clear, rather than repeated trips that get in everyone's way. We would rather come once at the right time than five times at the wrong ones.

Fraser drywall in context

About Fraser

Named for John Fraser, an original homesteader in the area and one of the first trustees of the Belmont School, Fraser is located in the City's far northwest.

What we see in Fraser

In Fraser the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

What affects the cost of new construction drywall in Fraser in Edmonton?

Size, board spec and finish level

The cost in Fraser depends on the square footage, the board spec (fire-rated, moisture-resistant and soundproof board cost more than standard), and the finish level — a Level 5 is more skim work than a Level 4. We price off the plans and a site look.

Spec done right in Fraser

We put the right board where the plan and code call for it — fire-rated on garage and suite separations, moisture-resistant in wet areas — so your Fraser build passes inspection the first time.

One crew hanging and finishing

Removing the handoff

The common failure on an Fraser build is a boarding crew and a taping crew with a gap between them: poor hanging becomes the finisher's problem, and nobody owns it.

What that changes

When the crew that finishes also hangs, the layout decisions are made by the people who will have to hide them. It also removes a scheduling gap where a build typically loses a week.

Corner bead and the edges people notice

Where a house looks built or thrown up

Outside corners take the abuse and are what the eye follows. Metal, paper-faced or vinyl bead each behave differently, and the choice matters more in a house with children or pets.

Archways and bullnose

Curved and bullnose corners are slower and are priced accordingly. Deciding on them at framing rather than at taping keeps the Fraser schedule intact.

Sequencing around the other trades

You are in the middle

Drywall sits after mechanical and insulation, before flooring, trim, cabinets and paint. Everything behind you is waiting for you to finish.

How we commit

We quote a sequence with durations rather than one date, tell you what must be complete before we start, and flag early if something slips. That is more useful to a builder than a confident single date that moves twice.

Board layout, and why it decides the finish

Fewer joints, better wall

Hanging board to minimise joints — especially butt joints, which have no factory taper — makes the biggest single difference to how a finished Fraser wall looks.

Sheet length matters

Longer sheets cost slightly more and eliminate joints. On a long hallway or a great room wall that trade is worth making, and it is a decision made at ordering, not at taping.

How it works

Simple, clean, on schedule — New Construction Drywall in Fraser Edmonton

Free quote

We come out to your Fraser Edmonton property, take a real look at the new construction drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every new construction drywall quote in Fraser Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the new construction drywall in Fraser Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Fraser Edmonton home while we finish the new construction drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished new construction drywall with us and you're happy with the result in Fraser Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the new construction drywall contractor Fraser Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your new construction drywall project in Fraser Edmonton.

Read our reviews on Google

FAQ — New Construction Drywall Fraser Edmonton

New Construction Drywall Fraser Edmonton: your questions answered

Do you install the right board where code requires it in Fraser?: Yes — fire-rated board on Fraser garage and suite separations, moisture-resistant in wet areas. We board your Fraser project to spec so it passes inspection.
Can you work in an Alberta winter?: Yes, if the building can hold a steady temperature through the taping stage with ventilation to carry moisture off. Compound will not cure in a cold building, and forcing it produces joints that crack once the heat goes on.
Do you offer Level 5 finishing for new Fraser builds?: Yes — we finish new construction to a flat Level 4 or, where the paint spec calls for it, a full Level 5 skim on feature areas in your Fraser build.
Will the correct board go where Fraser code demands it?: Yes — Type X where Fraser garages and suites meet the house, moisture-resistant board in wet zones. We board your Fraser project to spec so it passes inspection.
Will the joints crack as the house settles?: Some hairline movement in the first year is normal in a new Fraser house. Correct fastener spacing, joints on framing and unrushed coats reduce it. Anyone promising no settlement cracking is promising what they cannot deliver.
Can you keep to our construction schedule?: We quote a sequence with durations rather than a single date, tell you what must be complete before we start, and flag early if something slips. That is more useful than a confident date that moves twice.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

New Construction Drywall Fraser Edmonton

New construction drywall in Fraser, on schedule