Do you offer Level 5 finishing for new Canon Ridge builds?

Yes — we finish new construction to a flat Level 4 or, where the paint spec calls for it, a full Level 5 skim on feature areas in your Canon Ridge build.

When in the build should drywall start?

After framing, mechanical rough-in and insulation have passed inspection, and after the building is closed in and can hold a stable temperature. Boarding before those are signed off risks covering something an inspector needs to see.

Do you install the right board where code requires it in Canon Ridge?

Yes — fire-rated board on Canon Ridge garage and suite separations, moisture-resistant in wet areas. We board your Canon Ridge project to spec so it passes inspection.

Will the correct board go where Canon Ridge code demands it?

Yes — Type X where Canon Ridge garages and suites meet the house, moisture-resistant board in wet zones. We board your Canon Ridge project to spec so it passes inspection.

Does the Canon Ridge board spec follow code requirements?

Yes — Canon Ridge separations get fire-rated board; wet areas get moisture-resistant. We board your Canon Ridge project to spec so it passes inspection.

Is Level 5 available on Canon Ridge new construction?

Yes — we finish new construction to a flat Level 4 or, where the paint spec calls for it, a full Level 5 skim on feature areas in your Canon Ridge build.

New Construction Drywall Canon Ridge Edmonton | New Build Taping

New build drywall in Canon Ridge that does not hold up the trades

On a Canon Ridge new build the drywall sets everything: square boarding, tight taping and a flat finish let paint and trim land right. In Canon Ridge we board, tape, mud and finish new construction to a smooth Level 4 or 5, with fire-rated, moisture-resistant and soundproof board wherever the plan calls for it. Canon Ridge is an Northeast community with a mix of older homes and newer builds, so new-construction work here is steady. We cover Canon Ridge, Balwin, Bannerman, Belmont and Northeast, 7 days a week.

Coordinated with your other trades and timeline
Additions, infills and second-storey builds
Fire-rated, moisture-resistant and soundproof board to spec
Basement and secondary-suite drywall
Full new-build boarding and finishing in Canon Ridge
Level 4 or Level 5 finishing
Canon Ridge coverage — we come to you

Boarding new builds, additions and suites in Canon Ridge

New homes and additions

In Canon Ridge we board and finish complete new homes, additions and infills, coordinating with framers, electricians and plumbers so the drywall stage keeps the build on schedule.

Basements and secondary suites

Basement development and secondary suites are common — we board these with fire-rated and soundproof assemblies to the suite spec. Canon Ridge projects can also draw on Legal Suite Drywall Edmonton and Basement Drywall Edmonton.

Canon Ridge drywall in context

About Canon Ridge

Canon Ridge lies within the Hermitage area, and is named for an Anglican minister who arrived in Edmonton in 1875.

What we see in Canon Ridge

In Canon Ridge the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We confirm what your home actually needs on site, in writing, before anything starts.

Why Canon Ridge homeowners and builders trust Emplastrum

Showhome-standard finishing

We are a mudding and taping specialist, so the finish on your Canon Ridge new build is the same standard we put on showhomes across Edmonton — flat, clean and ready for paint.

Fixed price, on schedule

We do new construction drywall across Canon Ridge and Northeast, 7 days a week. You get the Canon Ridge number before we start, a tidy site, coordinated trades and backed work. Any issue on an Canon Ridge job earns a return trip and a proper fix.

One crew hanging and finishing

Removing the handoff

The common failure on an Canon Ridge build is a boarding crew and a taping crew with a gap between them: poor hanging becomes the finisher's problem, and nobody owns it.

What that changes

When the crew that finishes also hangs, the layout decisions are made by the people who will have to hide them. It also removes a scheduling gap where a build typically loses a week.

Choosing board for each room

Not all one product

A new Canon Ridge home typically needs standard board through most rooms, moisture-resistant in bathrooms and laundry, Type X in the garage assembly and any rated separation, and sometimes acoustic assemblies in bedrooms or a theatre.

Ordered by room

Getting that mix right at ordering avoids the substitution that happens when the wrong board is what is on site.

What affects the cost of new construction drywall in Canon Ridge in Edmonton?

Size, board spec and finish level

The cost in Canon Ridge depends on the square footage, the board spec (fire-rated, moisture-resistant and soundproof board cost more than standard), and the finish level — a Level 5 is more skim work than a Level 4. We price off the plans and a site look.

Spec done right in Canon Ridge

We put the right board where the plan and code call for it — fire-rated on garage and suite separations, moisture-resistant in wet areas — so your Canon Ridge build passes inspection the first time.

Ceilings first, then walls

Standard for a reason

Ceiling board goes up first so the wall sheets support its edges. Reversing it leaves the ceiling perimeter unsupported and produces cracking at the wall junction.

On a new Canon Ridge build

It also lets the crew work overhead while the floor is clear, which is faster and safer than working around stacked wall board.

How it works

Simple, clean, on schedule — New Construction Drywall in Canon Ridge Edmonton

Free quote

We come out to your Canon Ridge Edmonton property, take a real look at the new construction drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every new construction drywall quote in Canon Ridge Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the new construction drywall in Canon Ridge Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Canon Ridge Edmonton home while we finish the new construction drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished new construction drywall with us and you're happy with the result in Canon Ridge Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the new construction drywall contractor Canon Ridge Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your new construction drywall project in Canon Ridge Edmonton.

Read our reviews on Google

FAQ — New Construction Drywall Canon Ridge Edmonton

New Construction Drywall Canon Ridge Edmonton: your questions answered

Do you offer Level 5 finishing for new Canon Ridge builds?: Yes — we finish new construction to a flat Level 4 or, where the paint spec calls for it, a full Level 5 skim on feature areas in your Canon Ridge build.
When in the build should drywall start?: After framing, mechanical rough-in and insulation have passed inspection, and after the building is closed in and can hold a stable temperature. Boarding before those are signed off risks covering something an inspector needs to see.
Do you install the right board where code requires it in Canon Ridge?: Yes — fire-rated board on Canon Ridge garage and suite separations, moisture-resistant in wet areas. We board your Canon Ridge project to spec so it passes inspection.
Will the correct board go where Canon Ridge code demands it?: Yes — Type X where Canon Ridge garages and suites meet the house, moisture-resistant board in wet zones. We board your Canon Ridge project to spec so it passes inspection.
Does the Canon Ridge board spec follow code requirements?: Yes — Canon Ridge separations get fire-rated board; wet areas get moisture-resistant. We board your Canon Ridge project to spec so it passes inspection.
Is Level 5 available on Canon Ridge new construction?: Yes — we finish new construction to a flat Level 4 or, where the paint spec calls for it, a full Level 5 skim on feature areas in your Canon Ridge build.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

New Construction Drywall Canon Ridge Edmonton

New build drywall in Canon Ridge that does not hold up the trades