Will the joints crack as the house settles?

Some hairline movement in the first year is normal in a new Bisset house. Correct fastener spacing, joints on framing and unrushed coats reduce it. Anyone promising no settlement cracking is promising what they cannot deliver.

Do you offer Level 5 finishing for new Bisset builds?

Yes — we finish new construction to a flat Level 4 or, where the paint spec calls for it, a full Level 5 skim on feature areas in your Bisset build.

Can you work to our construction schedule?

Yes, and we would rather commit to a sequence than a single date. We tell you what must be complete before we start, roughly how long each stage takes, and what would push it — so if something slips, you know early.

Do you install the right board where code requires it in Bisset?

Yes — fire-rated board on Bisset garage and suite separations, moisture-resistant in wet areas. We board your Bisset project to spec so it passes inspection.

Is Level 5 available on Bisset new construction?

Yes — we finish new construction to a flat Level 4 or, where the paint spec calls for it, a full Level 5 skim on feature areas in your Bisset build.

Can you work in an Alberta winter?

Yes, if the building can hold a steady temperature through the taping stage with ventilation to carry moisture off. Compound will not cure in a cold building, and forcing it produces joints that crack once the heat goes on.

New Construction Drywall Bisset Edmonton | New Build Taping

New construction drywall in Bisset, boarded and finished right

New Bisset builds and major additions live or die on the drywall — boarded square, taped tight, finished flat, and the paint and trim fall into place. In Bisset we board, tape, mud and finish new construction to a smooth Level 4 or 5, with fire-rated, moisture-resistant and soundproof board wherever the plan calls for it. Bisset is an Mill Woods and Meadows community with a mix of older homes and newer builds, so new-construction work here is steady. We cover Bisset, Crawford Plains, Daly Grove, Ekota and Mill Woods and Meadows, 7 days a week.

Level 4 or Level 5 finishing
Coordinated with your other trades and timeline
Fire-rated, moisture-resistant and soundproof board to spec
Additions, infills and second-storey builds
Bisset coverage — we come to you
Basement and secondary-suite drywall
Full new-build boarding and finishing in Bisset

Handing over to the painter

What paint-ready actually means

Sanded, dust removed, edges cut clean, and any defect the painter would otherwise find dealt with first.

The walkthrough

We would rather walk an Bisset house with the painter before they start than receive a list afterwards. Most disputes between the two trades are about surfaces neither inspected together, and ten minutes at handover prevents them.

Bisset drywall in context

About Bisset

Bisset is named for Judge Athelstan Bisset, Q.C.

What we see in Bisset

In Bisset the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Why Bisset homeowners and builders trust Emplastrum

Showhome-standard finishing

We are a mudding and taping specialist, so the finish on your Bisset new build is the same standard we put on showhomes across Edmonton — flat, clean and ready for paint.

Fixed price, on schedule

We do new construction drywall across Bisset and Mill Woods and Meadows, 7 days a week. You get the Bisset number before we start, a tidy site, coordinated trades and backed work. Any issue on an Bisset job earns a return trip and a proper fix.

Corner bead and the edges people notice

Where a house looks built or thrown up

Outside corners take the abuse and are what the eye follows. Metal, paper-faced or vinyl bead each behave differently, and the choice matters more in a house with children or pets.

Archways and bullnose

Curved and bullnose corners are slower and are priced accordingly. Deciding on them at framing rather than at taping keeps the Bisset schedule intact.

Board layout, and why it decides the finish

Fewer joints, better wall

Hanging board to minimise joints — especially butt joints, which have no factory taper — makes the biggest single difference to how a finished Bisset wall looks.

Sheet length matters

Longer sheets cost slightly more and eliminate joints. On a long hallway or a great room wall that trade is worth making, and it is a decision made at ordering, not at taping.

What affects the cost of new construction drywall in Bisset in Edmonton?

Size, board spec and finish level

The cost in Bisset depends on the square footage, the board spec (fire-rated, moisture-resistant and soundproof board cost more than standard), and the finish level — a Level 5 is more skim work than a Level 4. We price off the plans and a site look.

Spec done right in Bisset

We put the right board where the plan and code call for it — fire-rated on garage and suite separations, moisture-resistant in wet areas — so your Bisset build passes inspection the first time.

Our Bisset new construction process, step by step

Board square and to spec

A clean finish in Bisset starts with boarding — we hang square and tight, stagger joints and put the right board type on every surface the plan specifies.

Tape, coat and finish

We tape, apply mud coats with full drying time between each, then sand to a flat Level 4 or 5. New-build drywall that cracks or telegraphs seams usually had its coats rushed; the Bisset schedule allows full drying, plus a light check before paint.

How it works

Simple, clean, on schedule — New Construction Drywall in Bisset Edmonton

Free quote

We come out to your Bisset Edmonton property, take a real look at the new construction drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every new construction drywall quote in Bisset Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the new construction drywall in Bisset Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Bisset Edmonton home while we finish the new construction drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished new construction drywall with us and you're happy with the result in Bisset Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the new construction drywall contractor Bisset Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your new construction drywall project in Bisset Edmonton.

Read our reviews on Google

FAQ — New Construction Drywall Bisset Edmonton

New Construction Drywall Bisset Edmonton: your questions answered

Will the joints crack as the house settles?: Some hairline movement in the first year is normal in a new Bisset house. Correct fastener spacing, joints on framing and unrushed coats reduce it. Anyone promising no settlement cracking is promising what they cannot deliver.
Do you offer Level 5 finishing for new Bisset builds?: Yes — we finish new construction to a flat Level 4 or, where the paint spec calls for it, a full Level 5 skim on feature areas in your Bisset build.
Can you work to our construction schedule?: Yes, and we would rather commit to a sequence than a single date. We tell you what must be complete before we start, roughly how long each stage takes, and what would push it — so if something slips, you know early.
Do you install the right board where code requires it in Bisset?: Yes — fire-rated board on Bisset garage and suite separations, moisture-resistant in wet areas. We board your Bisset project to spec so it passes inspection.
Is Level 5 available on Bisset new construction?: Yes — we finish new construction to a flat Level 4 or, where the paint spec calls for it, a full Level 5 skim on feature areas in your Bisset build.
Can you work in an Alberta winter?: Yes, if the building can hold a steady temperature through the taping stage with ventilation to carry moisture off. Compound will not cure in a cold building, and forcing it produces joints that crack once the heat goes on.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

New Construction Drywall Bisset Edmonton

New construction drywall in Bisset, boarded and finished right