Do you install the right board where code requires it in Alberta Avenue?

Yes — fire-rated board on Alberta Avenue garage and suite separations, moisture-resistant in wet areas. We board your Alberta Avenue project to spec so it passes inspection.

Do you stand behind your new construction drywall in Alberta Avenue?

Yes. We walk the finished Alberta Avenue job with you before we hand it off for paint, and if something is not right we come back and make it right.

Will the correct board go where Alberta Avenue code demands it?

Yes — Type X where Alberta Avenue garages and suites meet the house, moisture-resistant board in wet zones. We board your Alberta Avenue project to spec so it passes inspection.

Can you finish a Alberta Avenue new build to Level 5?

Yes — we finish new construction to a flat Level 4 or, where the paint spec calls for it, a full Level 5 skim on feature areas in your Alberta Avenue build.

Do you hang and finish, or just one?

Both, with one crew. The common failure on a Alberta Avenue build is a handoff between a boarding crew and a taping crew, where poor hanging becomes the finisher problem and nobody owns it. One crew removes that argument.

When in the build should drywall start?

After framing, mechanical rough-in and insulation have passed inspection, and after the building is closed in and can hold a stable temperature. Boarding before those are signed off risks covering something an inspector needs to see.

New Construction Drywall Alberta Avenue Edmonton | New Build Taping

New build drywall in Alberta Avenue that does not hold up the trades

The drywall makes or breaks a new Alberta Avenue build — get the boarding square, the tape tight and the finish flat and everything after goes smoothly. In Alberta Avenue we board, tape, mud and finish new construction to a smooth Level 4 or 5, with fire-rated, moisture-resistant and soundproof board wherever the plan calls for it. Alberta Avenue is an North Central community with a mix of older homes and newer builds, so new-construction work here is steady. We cover Alberta Avenue, Abbottsfield, Beacon Heights, Bellevue and North Central, 7 days a week.

Coordinated with your other trades and timeline
Alberta Avenue coverage — we come to you
Level 4 or Level 5 finishing
Additions, infills and second-storey builds
Full new-build boarding and finishing in Alberta Avenue
Basement and secondary-suite drywall
Fire-rated, moisture-resistant and soundproof board to spec

What affects the cost of new construction drywall in Alberta Avenue in Edmonton?

Size, board spec and finish level

The cost in Alberta Avenue depends on the square footage, the board spec (fire-rated, moisture-resistant and soundproof board cost more than standard), and the finish level — a Level 5 is more skim work than a Level 4. We price off the plans and a site look.

Spec done right in Alberta Avenue

We put the right board where the plan and code call for it — fire-rated on garage and suite separations, moisture-resistant in wet areas — so your Alberta Avenue build passes inspection the first time.

Alberta Avenue drywall in context

About Alberta Avenue

One of the city's older residential neighbourhoods, Alberta Avenue is located in the inner city.

What we see in Alberta Avenue

In Alberta Avenue the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Garage and mechanical room assemblies

Rated, not just boarded

The garage ceiling under living space, the garage-to-house wall and the furnace room usually need rated assemblies on an Alberta Avenue build.

Inspected before covered

Those are inspected before the finish goes on, so they are sequenced to the inspection rather than boarded ahead. It is also the assembly most often found incomplete later — board up, joints untaped.

Handing over to the painter

What paint-ready actually means

Sanded, dust removed, edges cut clean, and any defect the painter would otherwise find dealt with first.

The walkthrough

We would rather walk an Alberta Avenue house with the painter before they start than receive a list afterwards. Most disputes between the two trades are about surfaces neither inspected together, and ten minutes at handover prevents them.

Temperature and humidity on an Alberta Avenue site

Compound needs conditions

Joint compound will not cure properly in a cold building, and forcing it produces joints that shrink and crack after the heat goes on.

What we need

A building that can hold a steady temperature through the taping stage, with ventilation to carry moisture away. In an Alberta winter that means temporary heat planned into the schedule rather than assumed.

Boarding new builds, additions and suites in Alberta Avenue

New homes and additions

In Alberta Avenue we board and finish complete new homes, additions and infills, coordinating with framers, electricians and plumbers so the drywall stage keeps the build on schedule.

Basements and secondary suites

Basement development and secondary suites are common — we board these with fire-rated and soundproof assemblies to the suite spec. Alberta Avenue projects can also draw on Legal Suite Drywall Edmonton and Basement Drywall Edmonton.

Level of finish, room by room

Match it to the light

Most Alberta Avenue rooms are well served by Level 4. Great rooms, tall entries and any wall with a window running down it justify Level 5.

Deciding at the right time

This is a framing-stage decision, not a taping-stage one, because it changes the schedule. Deciding late compresses the coats at exactly the point where compression causes cracks.

How it works

Simple, clean, on schedule — New Construction Drywall in Alberta Avenue Edmonton

Free quote

We come out to your Alberta Avenue Edmonton property, take a real look at the new construction drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every new construction drywall quote in Alberta Avenue Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the new construction drywall in Alberta Avenue Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Alberta Avenue Edmonton home while we finish the new construction drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished new construction drywall with us and you're happy with the result in Alberta Avenue Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the new construction drywall contractor Alberta Avenue Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your new construction drywall project in Alberta Avenue Edmonton.

Read our reviews on Google

FAQ — New Construction Drywall Alberta Avenue Edmonton

New Construction Drywall Alberta Avenue Edmonton: your questions answered

Do you install the right board where code requires it in Alberta Avenue?: Yes — fire-rated board on Alberta Avenue garage and suite separations, moisture-resistant in wet areas. We board your Alberta Avenue project to spec so it passes inspection.
Do you stand behind your new construction drywall in Alberta Avenue in Edmonton?: Yes. We walk the finished Alberta Avenue job with you before we hand it off for paint, and if something is not right we come back and make it right.
Will the correct board go where Alberta Avenue code demands it?: Yes — Type X where Alberta Avenue garages and suites meet the house, moisture-resistant board in wet zones. We board your Alberta Avenue project to spec so it passes inspection.
Can you finish a Alberta Avenue new build to Level 5?: Yes — we finish new construction to a flat Level 4 or, where the paint spec calls for it, a full Level 5 skim on feature areas in your Alberta Avenue build.
Do you hang and finish, or just one?: Both, with one crew. The common failure on a Alberta Avenue build is a handoff between a boarding crew and a taping crew, where poor hanging becomes the finisher problem and nobody owns it. One crew removes that argument.
When in the build should drywall start?: After framing, mechanical rough-in and insulation have passed inspection, and after the building is closed in and can hold a stable temperature. Boarding before those are signed off risks covering something an inspector needs to see.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

New Construction Drywall Alberta Avenue Edmonton

New build drywall in Alberta Avenue that does not hold up the trades