Can you coordinate with my Westwood electrician and plumber?

Yes — we sequence Westwood framing so your other trades can rough in cleanly before insulation and drywall go on.

Do you frame basement development layouts in Westwood?

Yes — framing an Abbottsfield, Alberta Avenue, Beacon Heights basement layout to plan, ready for insulation and drywall, is among our most common metal stud jobs. We also cover Abbottsfield, Alberta Avenue, Beacon Heights and North Central.

Do you frame basement development layouts in Westwood?

Yes — we frame Westwood basements to plan constantly — ready for insulation and drywall. We also cover Abbottsfield, Alberta Avenue, Beacon Heights and North Central.

Do you stand behind your framing work in Westwood?

Yes. We check every Abbottsfield, Alberta Avenue, Beacon Heights layout is square before we hand it off, and if something is not right we come back and make it right.

Is steel better for soundproofing?

Slightly, because steel is less rigid and transmits vibration less efficiently than wood. The difference is real but modest — the assembly, insulation and sealing matter far more than the stud material.

Can my Westwood electrician and plumber rough in around your framing?

Yes — in Westwood we frame in a sequence that lets electrical and plumbing rough in before close-up.

Metal Stud Framing Westwood Edmonton | Steel Studs

Steel stud partitions in Westwood for basements and shops

A finished Westwood space is only as straight as the frame beneath it. In Westwood we build steel-stud partition walls, bulkheads and basement layouts — squared, plumbed and spaced to the drywall spec you need. Westwood is an older North Central community where settling cracks, aging texture and the occasional plaster repair come up, so framing calls here often include repairs where original framing has shifted or been altered over the years, alongside basement development. We cover Westwood, Abbottsfield, Alberta Avenue, Beacon Heights and North Central, 7 days a week.

Bulkheads and soffits for ductwork and lighting
To-spec door and window openings in every Westwood frame
Westwood rough openings — doors and windows — framed exactly to spec
Abbottsfield, Alberta Avenue, Beacon Heights coverage — we come to you
Westwood coverage — we come to you
Coordinated with electrical and plumbing rough-in
Westwood track and stud spacing set to code for the drywall going over it

Why Westwood homeowners trust Emplastrum for metal stud framing in Edmonton

Square framing makes a flat finish possible

As a drywall and finishing company first, we frame walls the way we want to drywall them — square, plumb and properly spaced — because a crooked frame can never be fully hidden by finishing in Abbottsfield, Alberta Avenue, Beacon Heights.

Fixed price, same-day reply

We cover Abbottsfield, Alberta Avenue, Beacon Heights and North Central, 7 days a week. Free on-site Abbottsfield, Alberta Avenue, Beacon Heights quotes and fixed prices, and we stand behind the work.

Westwood drywall in context

About Westwood

The character of Westwood has changed considerably in the second half of the 20th century.

What we see in Westwood

In Westwood the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Backing in a steel wall

Plan it, because you cannot improvise

You cannot simply screw a heavy fixing into a steel stud web and trust it. Backing plates or wood blocking have to be built in where anything is being hung.

Ask before it closes

TV mounts, cabinets, grab bars, shelving, handrails. In an Westwood steel wall this is more important than in wood, because there is no fallback of hitting a stud.

Sound behaviour of steel walls

Actually an advantage

Steel studs are less rigid than wood and transmit vibration less efficiently, so a steel-framed Westwood partition often performs slightly better acoustically than the same wall in wood.

Do not over-claim it

The difference is real but modest. If sound is the goal, the assembly — insulation, layers and sealing — matters far more than the stud material.

Fire performance and rated assemblies

Non-combustible

Steel does not burn, which is why it appears in many rated assemblies. That does not make a steel wall rated on its own.

The assembly is what counts

A rated Westwood wall is a specified system — stud type and spacing, board type and layers, joint treatment. We build to the assembly on the drawings rather than assuming steel gives a rating by itself.

Running services through steel

Knockouts and grommets

Steel studs come with knockouts for wiring, and cables must be protected where they pass through — a bare cable against a cut steel edge is a hazard.

Coordination

Grommets or bushings go in as the wiring is run. We would rather walk the route with the electrician than have cables pulled through unprotected openings and discovered at inspection.

Framing for basements and openings in Westwood

Basement development layouts

A basement development layout is the most common metal stud job we do in Abbottsfield, Alberta Avenue, Beacon Heights — framing bedrooms, bathrooms, a media room or a legal suite to the plan, ready for insulation and drywall.

Openings and bulkheads

We frame partition walls and bulkheads to hide ductwork and provide a clean, level surface for the ceiling and lighting trades.

How it works

Simple, clean, on schedule — Metal Stud Framing in Westwood Edmonton

Free quote

We come out to your Westwood Edmonton property, take a real look at the metal stud framing, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every metal stud framing quote in Westwood Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the metal stud framing in Westwood Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Westwood Edmonton home while we finish the metal stud framing to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished metal stud framing with us and you're happy with the result in Westwood Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the metal stud framing contractor Westwood Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your metal stud framing project in Westwood Edmonton.

Read our reviews on Google

FAQ — Metal Stud Framing Westwood Edmonton

Metal Stud Framing Westwood Edmonton: your questions answered

Can you coordinate with my Westwood electrician and plumber?: Yes — we sequence Westwood framing so your other trades can rough in cleanly before insulation and drywall go on.
Do you frame basement development layouts in Westwood?: Yes — framing an Abbottsfield, Alberta Avenue, Beacon Heights basement layout to plan, ready for insulation and drywall, is among our most common metal stud jobs. We also cover Abbottsfield, Alberta Avenue, Beacon Heights and North Central.
Do you frame basement development layouts in Westwood?: Yes — we frame Westwood basements to plan constantly — ready for insulation and drywall. We also cover Abbottsfield, Alberta Avenue, Beacon Heights and North Central.
Do you stand behind your framing work in Westwood?: Yes. We check every Abbottsfield, Alberta Avenue, Beacon Heights layout is square before we hand it off, and if something is not right we come back and make it right.
Is steel better for soundproofing?: Slightly, because steel is less rigid and transmits vibration less efficiently than wood. The difference is real but modest — the assembly, insulation and sealing matter far more than the stud material.
Can my Westwood electrician and plumber rough in around your framing?: Yes — in Westwood we frame in a sequence that lets electrical and plumbing rough in before close-up.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Framing

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Metal Stud Framing Westwood Edmonton

Steel stud partitions in Westwood for basements and shops