Is steel framing more expensive?

Often competitive on material and faster to set out on a large straight run. On small irregular Rundle Heights jobs with lots of backing and odd angles, wood is usually quicker and cheaper. We price what suits the job.

Can you coordinate with my Rundle Heights electrician and plumber?

Yes — we sequence Abbottsfield, Alberta Avenue, Beacon Heights framing so your other trades can rough in cleanly before insulation and drywall go on.

Can you mix steel and wood?

Yes, and often that is the right answer — steel for the long straight partition runs, wood where cabinets, vanities or grab bars are going. We would rather explain the mix than sell one material for everything.

Do you frame door and window openings in Rundle Heights?

Yes — spec-framed rough openings are built into the Rundle Heights layout.

Do you stand behind your framing work in Rundle Heights?

Yes. We check every Abbottsfield, Alberta Avenue, Beacon Heights layout is square before we hand it off, and if something is not right we come back and make it right.

Why use steel studs instead of wood?

They arrive straight and stay straight — no warping with humidity, no shrinking, no twisting a finished wall out of plane later. That matters most on long runs, tall walls and where the finish level is high.

Metal Stud Framing Rundle Heights Edmonton | Steel Studs

Metal stud framing in Rundle Heights, straight and true

The frame decides the finish: crooked studs, crooked Rundle Heights walls. In Rundle Heights we build steel-stud partition walls, bulkheads and basement layouts — squared, plumbed and spaced to the drywall spec you need. Rundle Heights is an North Central community with a mix of older homes and newer builds, so framing calls range from straightforward basement layouts in the newer homes to repair and alteration work in the older ones nearby. We cover Rundle Heights, Abbottsfield, Alberta Avenue, Beacon Heights and North Central, 7 days a week.

Abbottsfield, Alberta Avenue, Beacon Heights door and window rough openings framed to spec
Track and stud layout to code — the base for Rundle Heights board
Basement development layouts framed to plan
Rundle Heights track and stud spacing set to code for the drywall going over it
Abbottsfield, Alberta Avenue, Beacon Heights track and stud spacing set to code for the drywall going over it
Coordinated with electrical and plumbing rough-in
Rundle Heights coverage — we come to you

Track, studs and how the wall goes together

Different system entirely

Steel framing is track at floor and ceiling with studs inserted and fastened, rather than plates and nails.

Why layout is faster

The track is set to the line first, so the wall position is fixed before a single stud goes in. On a large Rundle Heights layout that makes setting out quicker and more accurate than stick framing.

Rundle Heights drywall in context

About Rundle Heights

While Rundle Heights was first settled in the 1880s and was annexed to the City in 1961, most development did not occur until the 1970s.

What we see in Rundle Heights

In Rundle Heights the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Backing in a steel wall

Plan it, because you cannot improvise

You cannot simply screw a heavy fixing into a steel stud web and trust it. Backing plates or wood blocking have to be built in where anything is being hung.

Ask before it closes

TV mounts, cabinets, grab bars, shelving, handrails. In an Rundle Heights steel wall this is more important than in wood, because there is no fallback of hitting a stud.

Common metal stud framing situations in Rundle Heights in Edmonton

In Rundle Heights, rundle Heights sits in Edmonton's North Central district. While Rundle Heights was first settled in the 1880s and was annexed to the City in 1961, most development did not occur until the 1970s. Across roughly 1,320 homes here, the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We cover Rundle Heights and the surrounding North Central district, 7 days a week. One fixed price after an honest on-site look, and the job done right the first time.

Our Rundle Heights metal stud framing process in Edmonton, step by step

Layout first

We lay out track lines on the floor and ceiling from the plan or your walk-through direction, confirming every wall location before a single stud goes up in your Abbottsfield, Alberta Avenue, Beacon Heights space.

Frame square and plumb

We install track, cut and set the studs to spacing, and check every wall for square and plumb as we go — the framing stage is where a crooked wall gets built or avoided. See our basement drywall work in Abbottsfield, Alberta Avenue, Beacon Heights once the frame is up.

Sound behaviour of steel walls

Actually an advantage

Steel studs are less rigid than wood and transmit vibration less efficiently, so a steel-framed Rundle Heights partition often performs slightly better acoustically than the same wall in wood.

Do not over-claim it

The difference is real but modest. If sound is the goal, the assembly — insulation, layers and sealing — matters far more than the stud material.

Gauge, and why it is not all the same steel

Thickness matters

Interior non-load-bearing partitions use a lighter gauge than walls carrying weight or spanning tall. Using the lightest available everywhere gives walls that feel flimsy and telegraph movement.

What we specify

Gauge to suit the wall height and what the wall has to carry. In an Rundle Heights basement with an 8-foot ceiling that is straightforward; a tall stairwell wall is not.

How it works

Simple, clean, on schedule — Metal Stud Framing in Rundle Heights Edmonton

Free quote

We come out to your Rundle Heights Edmonton property, take a real look at the metal stud framing, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every metal stud framing quote in Rundle Heights Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the metal stud framing in Rundle Heights Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Rundle Heights Edmonton home while we finish the metal stud framing to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished metal stud framing with us and you're happy with the result in Rundle Heights Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the metal stud framing contractor Rundle Heights Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your metal stud framing project in Rundle Heights Edmonton.

Read our reviews on Google

FAQ — Metal Stud Framing Rundle Heights Edmonton

Metal Stud Framing Rundle Heights Edmonton: your questions answered

Is steel framing more expensive?: Often competitive on material and faster to set out on a large straight run. On small irregular Rundle Heights jobs with lots of backing and odd angles, wood is usually quicker and cheaper. We price what suits the job.
Can you coordinate with my Rundle Heights electrician and plumber?: Yes — we sequence Abbottsfield, Alberta Avenue, Beacon Heights framing so your other trades can rough in cleanly before insulation and drywall go on.
Can you mix steel and wood?: Yes, and often that is the right answer — steel for the long straight partition runs, wood where cabinets, vanities or grab bars are going. We would rather explain the mix than sell one material for everything.
Do you frame door and window openings in Rundle Heights?: Yes — spec-framed rough openings are built into the Rundle Heights layout.
Do you stand behind your framing work in Rundle Heights?: Yes. We check every Abbottsfield, Alberta Avenue, Beacon Heights layout is square before we hand it off, and if something is not right we come back and make it right.
Why use steel studs instead of wood?: They arrive straight and stay straight — no warping with humidity, no shrinking, no twisting a finished wall out of plane later. That matters most on long runs, tall walls and where the finish level is high.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Framing

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Metal Stud Framing Rundle Heights Edmonton

Metal stud framing in Rundle Heights, straight and true