Do you stand behind your framing work in Ottewell?

Yes. We check every Avonmore, Bonnie Doon, Capilano layout is square before we hand it off, and if something is not right we come back and make it right.

Do you frame basement development layouts in Ottewell?

Yes — framing an Avonmore, Bonnie Doon, Capilano basement layout to plan, ready for insulation and drywall, is among our most common metal stud jobs. We also cover Avonmore, Bonnie Doon, Capilano and Southeast.

Can my Ottewell electrician and plumber rough in around your framing?

Yes — in Ottewell we frame in a sequence that lets electrical and plumbing rough in before close-up.

Can you mix steel and wood?

Yes, and often that is the right answer — steel for the long straight partition runs, wood where cabinets, vanities or grab bars are going. We would rather explain the mix than sell one material for everything.

Can I hang a TV on a steel-framed wall?

Only with backing built in. You cannot trust a heavy fixing into a steel stud web. Tell us before the wall closes and we add backing plates or blocking — there is no fallback of hitting a stud like there is in wood.

Why use steel studs instead of wood?

They arrive straight and stay straight — no warping with humidity, no shrinking, no twisting a finished wall out of plane later. That matters most on long runs, tall walls and where the finish level is high.

Metal Stud Framing Ottewell Edmonton | Steel Studs

Metal stud framing in Ottewell, square and ready for drywall

Straight Ottewell walls start with a straight frame — there is no other way. In Ottewell we build steel-stud partition walls, bulkheads and basement layouts — squared, plumbed and spaced to the drywall spec you need. Ottewell is an Southeast community with a mix of older homes and newer builds, so framing calls range from straightforward basement layouts in the newer homes to repair and alteration work in the older ones nearby. We cover Ottewell, Avonmore, Bonnie Doon, Capilano and Southeast, 7 days a week.

Track and stud layout to code — the base for Ottewell board
Steel-stud partition wall framing in Ottewell
Ottewell track and stud spacing set to code for the drywall going over it
Avonmore, Bonnie Doon, Capilano door and window rough openings framed to spec
To-spec door and window openings in every Ottewell frame
Avonmore, Bonnie Doon, Capilano coverage — we come to you
Bulkheads and soffits for ductwork and lighting

Framing for basements and openings in Ottewell

Basement development layouts

A basement development layout is the most common metal stud job we do in Avonmore, Bonnie Doon, Capilano — framing bedrooms, bathrooms, a media room or a legal suite to the plan, ready for insulation and drywall.

Openings and bulkheads

We frame partition walls and bulkheads to hide ductwork and provide a clean, level surface for the ceiling and lighting trades.

Ottewell drywall in context

About Ottewell

Ottewell is one of the City's largest neighbourhoods, defined by major roadways on all four sides.

What we see in Ottewell

In Ottewell the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Backing in a steel wall

Plan it, because you cannot improvise

You cannot simply screw a heavy fixing into a steel stud web and trust it. Backing plates or wood blocking have to be built in where anything is being hung.

Ask before it closes

TV mounts, cabinets, grab bars, shelving, handrails. In an Ottewell steel wall this is more important than in wood, because there is no fallback of hitting a stud.

Track, studs and how the wall goes together

Different system entirely

Steel framing is track at floor and ceiling with studs inserted and fastened, rather than plates and nails.

Why layout is faster

The track is set to the line first, so the wall position is fixed before a single stud goes in. On a large Ottewell layout that makes setting out quicker and more accurate than stick framing.

Common metal stud framing situations in Ottewell in Edmonton

In Ottewell, ottewell sits in Edmonton's Southeast district. Ottewell is one of the City's largest neighbourhoods, defined by major roadways on all four sides. Across roughly 2,460 homes here, the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We cover Ottewell and the surrounding Southeast district, 7 days a week. Free on-site quote, one fixed price, and work that holds up after.

Why Ottewell homeowners trust Emplastrum for metal stud framing in Edmonton

Square framing makes a flat finish possible

As a drywall and finishing company first, we frame walls the way we want to drywall them — square, plumb and properly spaced — because a crooked frame can never be fully hidden by finishing in Ottewell.

Fixed price, same-day reply

We cover Ottewell and Southeast, 7 days a week. Free at-home Ottewell quoting, fixed pricing, and work we stand behind.

Gauge, and why it is not all the same steel

Thickness matters

Interior non-load-bearing partitions use a lighter gauge than walls carrying weight or spanning tall. Using the lightest available everywhere gives walls that feel flimsy and telegraph movement.

What we specify

Gauge to suit the wall height and what the wall has to carry. In an Ottewell basement with an 8-foot ceiling that is straightforward; a tall stairwell wall is not.

How it works

Simple, clean, on schedule — Metal Stud Framing in Ottewell Edmonton

Free quote

We come out to your Ottewell Edmonton property, take a real look at the metal stud framing, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every metal stud framing quote in Ottewell Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the metal stud framing in Ottewell Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Ottewell Edmonton home while we finish the metal stud framing to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished metal stud framing with us and you're happy with the result in Ottewell Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the metal stud framing contractor Ottewell Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your metal stud framing project in Ottewell Edmonton.

Read our reviews on Google

FAQ — Metal Stud Framing Ottewell Edmonton

Metal Stud Framing Ottewell Edmonton: your questions answered

Do you stand behind your framing work in Ottewell?: Yes. We check every Avonmore, Bonnie Doon, Capilano layout is square before we hand it off, and if something is not right we come back and make it right.
Do you frame basement development layouts in Ottewell?: Yes — framing an Avonmore, Bonnie Doon, Capilano basement layout to plan, ready for insulation and drywall, is among our most common metal stud jobs. We also cover Avonmore, Bonnie Doon, Capilano and Southeast.
Can my Ottewell electrician and plumber rough in around your framing?: Yes — in Ottewell we frame in a sequence that lets electrical and plumbing rough in before close-up.
Can you mix steel and wood?: Yes, and often that is the right answer — steel for the long straight partition runs, wood where cabinets, vanities or grab bars are going. We would rather explain the mix than sell one material for everything.
Can I hang a TV on a steel-framed wall?: Only with backing built in. You cannot trust a heavy fixing into a steel stud web. Tell us before the wall closes and we add backing plates or blocking — there is no fallback of hitting a stud like there is in wood.
Why use steel studs instead of wood?: They arrive straight and stay straight — no warping with humidity, no shrinking, no twisting a finished wall out of plane later. That matters most on long runs, tall walls and where the finish level is high.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Framing

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Metal Stud Framing Ottewell Edmonton

Metal stud framing in Ottewell, square and ready for drywall