Does a steel wall count as fire-rated?

No. Steel is non-combustible, which is why it appears in many rated assemblies, but a rating comes from the whole specified system — stud spacing, board type, layers and joint treatment. We build to the assembly on the drawings.

Do you stand behind your framing work in Ormsby Place?

Yes. We check every Aldergrove, Belmead, Callingwood North layout is square before we hand it off, and if something is not right we come back and make it right.

Do you coordinate Ormsby Place framing with electricians and plumbers?

Yes — trades rough in cleanly because the Ormsby Place framing is sequenced for them, ahead of insulation and drywall.

Is steel better for soundproofing?

Slightly, because steel is less rigid and transmits vibration less efficiently than wood. The difference is real but modest — the assembly, insulation and sealing matter far more than the stud material.

Is steel framing more expensive?

Often competitive on material and faster to set out on a large straight run. On small irregular Ormsby Place jobs with lots of backing and odd angles, wood is usually quicker and cheaper. We price what suits the job.

Can you coordinate with my Ormsby Place electrician and plumber?

Yes — we sequence Ormsby Place framing so your other trades can rough in cleanly before insulation and drywall go on.

Metal Stud Framing Ormsby Place Edmonton | Steel Studs

Metal stud framing in Aldergrove, Belmead, Callingwood North, square and ready for drywall

A finished Ormsby Place space is only as straight as the frame beneath it. In Ormsby Place we build steel-stud partition walls, bulkheads and basement layouts — squared, plumbed and spaced to the drywall spec you need. Ormsby Place is an older West Edmonton community where settling cracks, aging texture and the occasional plaster repair come up, so framing calls here often include repairs where original framing has shifted or been altered over the years, alongside basement development. We cover Ormsby Place, Aldergrove, Belmead, Callingwood North and West Edmonton, 7 days a week.

Aldergrove, Belmead, Callingwood North door and window rough openings framed to spec
Coordinated with electrical and plumbing rough-in
Aldergrove, Belmead, Callingwood North coverage — we come to you
Spacing to code on Ormsby Place track and studs so the drywall lands right
Track and stud layout to code — the base for Ormsby Place board
Aldergrove, Belmead, Callingwood North track and stud spacing set to code for the drywall going over it
Steel-stud partition wall framing in Aldergrove, Belmead, Callingwood North

Running services through steel

Knockouts and grommets

Steel studs come with knockouts for wiring, and cables must be protected where they pass through — a bare cable against a cut steel edge is a hazard.

Coordination

Grommets or bushings go in as the wiring is run. We would rather walk the route with the electrician than have cables pulled through unprotected openings and discovered at inspection.

Ormsby Place drywall in context

About Ormsby Place

Named for the man responsible for developing Edmonton's grid system of numbering streets and avenues, Ormsby Place is located in the City's west end.

What we see in Ormsby Place

In Ormsby Place the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Why Ormsby Place homeowners trust Emplastrum for metal stud framing in Edmonton

Square framing makes a flat finish possible

As a drywall and finishing company first, we frame walls the way we want to drywall them — square, plumb and properly spaced — because a crooked frame can never be fully hidden by finishing in Ormsby Place.

Fixed price, same-day reply

We cover Ormsby Place and West Edmonton, 7 days a week. Free at-home Ormsby Place quoting, fixed pricing, and work we stand behind.

Backing in a steel wall

Plan it, because you cannot improvise

You cannot simply screw a heavy fixing into a steel stud web and trust it. Backing plates or wood blocking have to be built in where anything is being hung.

Ask before it closes

TV mounts, cabinets, grab bars, shelving, handrails. In an Ormsby Place steel wall this is more important than in wood, because there is no fallback of hitting a stud.

Why Ormsby Place homeowners trust Emplastrum for metal stud framing in Edmonton

Square framing makes a flat finish possible

Fixed price, same-day reply

We cover Aldergrove, Belmead, Callingwood North and West Edmonton, 7 days a week. Free on-site Aldergrove, Belmead, Callingwood North quotes and fixed prices, and we stand behind the work.

Sound behaviour of steel walls

Actually an advantage

Steel studs are less rigid than wood and transmit vibration less efficiently, so a steel-framed Ormsby Place partition often performs slightly better acoustically than the same wall in wood.

Do not over-claim it

The difference is real but modest. If sound is the goal, the assembly — insulation, layers and sealing — matters far more than the stud material.

What affects the cost of metal stud framing in Ormsby Place in Edmonton?

Wall length, height and layout complexity

The cost of steel-stud framing in Aldergrove, Belmead, Callingwood North tracks the total wall length and height, the number of openings and bulkheads, and how complex the layout is. We price off the plan or a site walk-through.

Typical framing work in Aldergrove, Belmead, Callingwood North

Framing calls here often include repairs where original framing has shifted or been altered over the years, alongside basement development.

How it works

Simple, clean, on schedule — Metal Stud Framing in Ormsby Place Edmonton

Free quote

We come out to your Ormsby Place Edmonton property, take a real look at the metal stud framing, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every metal stud framing quote in Ormsby Place Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the metal stud framing in Ormsby Place Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Ormsby Place Edmonton home while we finish the metal stud framing to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished metal stud framing with us and you're happy with the result in Ormsby Place Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the metal stud framing contractor Ormsby Place Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your metal stud framing project in Ormsby Place Edmonton.

Read our reviews on Google

FAQ — Metal Stud Framing Ormsby Place Edmonton

Metal Stud Framing Ormsby Place Edmonton: your questions answered

Does a steel wall count as fire-rated?: No. Steel is non-combustible, which is why it appears in many rated assemblies, but a rating comes from the whole specified system — stud spacing, board type, layers and joint treatment. We build to the assembly on the drawings.
Do you stand behind your framing work in Ormsby Place?: Yes. We check every Aldergrove, Belmead, Callingwood North layout is square before we hand it off, and if something is not right we come back and make it right.
Do you coordinate Ormsby Place framing with electricians and plumbers?: Yes — trades rough in cleanly because the Ormsby Place framing is sequenced for them, ahead of insulation and drywall.
Is steel better for soundproofing?: Slightly, because steel is less rigid and transmits vibration less efficiently than wood. The difference is real but modest — the assembly, insulation and sealing matter far more than the stud material.
Is steel framing more expensive?: Often competitive on material and faster to set out on a large straight run. On small irregular Ormsby Place jobs with lots of backing and odd angles, wood is usually quicker and cheaper. We price what suits the job.
Can you coordinate with my Ormsby Place electrician and plumber?: Yes — we sequence Ormsby Place framing so your other trades can rough in cleanly before insulation and drywall go on.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Framing

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Metal Stud Framing Ormsby Place Edmonton

Metal stud framing in Aldergrove, Belmead, Callingwood North, square and ready for drywall