Do you frame door and window openings in Lee Ridge?

Yes — spec-framed rough openings are built into the Lee Ridge layout.

Do you also do the drywall after framing in Lee Ridge?

Yes — we frame and drywall Bisset, Crawford Plains, Daly Grove projects as one job with one point of responsibility, or frame only for your own crew.

Why use steel studs instead of wood?

They arrive straight and stay straight — no warping with humidity, no shrinking, no twisting a finished wall out of plane later. That matters most on long runs, tall walls and where the finish level is high.

Can you mix steel and wood?

Yes, and often that is the right answer — steel for the long straight partition runs, wood where cabinets, vanities or grab bars are going. We would rather explain the mix than sell one material for everything.

Do you also do the drywall after framing in Lee Ridge?

Yes — one Lee Ridge contract covering frame and drywall, or just the framing for your own drywall crew.

Metal Stud Framing Lee Ridge Edmonton | Steel Studs

Metal stud framing in Bisset, Crawford Plains, Daly Grove, square and ready for drywall

A finished Lee Ridge space is only as straight as the frame beneath it. In Lee Ridge we build steel-stud partition walls, bulkheads and basement layouts — squared, plumbed and spaced to the drywall spec you need. Lee Ridge is an Mill Woods and Meadows community with a mix of older homes and newer builds, so framing calls range from straightforward basement layouts in the newer homes to repair and alteration work in the older ones nearby. We cover Lee Ridge, Bisset, Crawford Plains, Daly Grove and Mill Woods and Meadows, 7 days a week.

Bulkheads and soffits for ductwork and lighting
Bisset, Crawford Plains, Daly Grove coverage — we come to you
Lee Ridge door and window rough openings framed to spec
Steel-stud partition wall framing in Lee Ridge
Lee Ridge rough openings — doors and windows — framed exactly to spec
Lee Ridge coverage — we come to you
Spacing to code on Lee Ridge track and studs so the drywall lands right

Fire performance and rated assemblies

Non-combustible

Steel does not burn, which is why it appears in many rated assemblies. That does not make a steel wall rated on its own.

The assembly is what counts

A rated Lee Ridge wall is a specified system — stud type and spacing, board type and layers, joint treatment. We build to the assembly on the drawings rather than assuming steel gives a rating by itself.

Lee Ridge drywall in context

About Lee Ridge

Lee Ridge, named for Robert Lee (Mayor of Edmonton, 1909 - 1910), is one of the 27 neighbourhoods of Mill Woods.

What we see in Lee Ridge

In Lee Ridge the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Where wood is still the right answer

Fastening and load

Wood takes a screw anywhere along its length, which makes backing, cabinets, handrails and heavy fixings far simpler.

The practical mix

Many Lee Ridge jobs are best framed in steel for the long straight runs and wood where cabinets, vanities or grab bars are going. We would rather explain the mix than sell one material for the whole job.

Running services through steel

Knockouts and grommets

Steel studs come with knockouts for wiring, and cables must be protected where they pass through — a bare cable against a cut steel edge is a hazard.

Coordination

Grommets or bushings go in as the wiring is run. We would rather walk the route with the electrician than have cables pulled through unprotected openings and discovered at inspection.

Backing in a steel wall

Plan it, because you cannot improvise

You cannot simply screw a heavy fixing into a steel stud web and trust it. Backing plates or wood blocking have to be built in where anything is being hung.

Ask before it closes

TV mounts, cabinets, grab bars, shelving, handrails. In an Lee Ridge steel wall this is more important than in wood, because there is no fallback of hitting a stud.

Cost, and when steel is actually cheaper

Material against labour

Steel is often competitive on material and can be faster to set out on a large straight run. On small, irregular Lee Ridge jobs with lots of backing and odd angles, wood is usually quicker.

How we quote

We price the material that suits the job rather than defaulting, and tell you where the difference actually comes from.

What affects the cost of metal stud framing in Lee Ridge in Edmonton?

Wall length, height and layout complexity

The cost of steel-stud framing in Lee Ridge tracks the total wall length and height, the number of openings and bulkheads, and how complex the layout is. We price off the plan or a site walk-through.

Typical framing work in Lee Ridge

Framing calls range from straightforward basement layouts in the newer homes to repair and alteration work in the older ones nearby.

How it works

Simple, clean, on schedule — Metal Stud Framing in Lee Ridge Edmonton

Free quote

We come out to your Lee Ridge Edmonton property, take a real look at the metal stud framing, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every metal stud framing quote in Lee Ridge Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the metal stud framing in Lee Ridge Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Lee Ridge Edmonton home while we finish the metal stud framing to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished metal stud framing with us and you're happy with the result in Lee Ridge Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the metal stud framing contractor Lee Ridge Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your metal stud framing project in Lee Ridge Edmonton.

Read our reviews on Google

FAQ — Metal Stud Framing Lee Ridge Edmonton

Metal Stud Framing Lee Ridge Edmonton: your questions answered

Do you frame door and window openings in Lee Ridge?: Yes — spec-framed rough openings are built into the Lee Ridge layout.
Do you also do the drywall after framing in Lee Ridge?: Yes — we frame and drywall Bisset, Crawford Plains, Daly Grove projects as one job with one point of responsibility, or frame only for your own crew.
Is steel framing more expensive?: Often competitive on material and faster to set out on a large straight run. On small irregular Lee Ridge jobs with lots of backing and odd angles, wood is usually quicker and cheaper. We price what suits the job.
Why use steel studs instead of wood?: They arrive straight and stay straight — no warping with humidity, no shrinking, no twisting a finished wall out of plane later. That matters most on long runs, tall walls and where the finish level is high.
Can you mix steel and wood?: Yes, and often that is the right answer — steel for the long straight partition runs, wood where cabinets, vanities or grab bars are going. We would rather explain the mix than sell one material for everything.
Do you also do the drywall after framing in Lee Ridge?: Yes — one Lee Ridge contract covering frame and drywall, or just the framing for your own drywall crew.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Framing

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Metal Stud Framing Lee Ridge Edmonton

Metal stud framing in Bisset, Crawford Plains, Daly Grove, square and ready for drywall