Does a steel wall count as fire-rated?

No. Steel is non-combustible, which is why it appears in many rated assemblies, but a rating comes from the whole specified system — stud spacing, board type, layers and joint treatment. We build to the assembly on the drawings.

Do you frame door and window openings in Kensington?

Yes — spec-framed rough openings are built into the Kensington layout.

Is steel framing more expensive?

Often competitive on material and faster to set out on a large straight run. On small irregular Kensington jobs with lots of backing and odd angles, wood is usually quicker and cheaper. We price what suits the job.

Can you coordinate with my Kensington electrician and plumber?

Yes — we sequence Albany, Athlone, Baranow framing so your other trades can rough in cleanly before insulation and drywall go on.

Can you mix steel and wood?

Yes, and often that is the right answer — steel for the long straight partition runs, wood where cabinets, vanities or grab bars are going. We would rather explain the mix than sell one material for everything.

Do you frame door and window openings in Kensington?

Yes — Albany, Athlone, Baranow rough openings are framed to spec as part of the wall layout.

Metal Stud Framing Kensington Edmonton | Steel Studs

Metal stud framing in Kensington, straight and true

A finished Kensington space is only as straight as the frame beneath it. In Kensington we build steel-stud partition walls, bulkheads and basement layouts — squared, plumbed and spaced to the drywall spec you need. Kensington is an older Northwest community where settling cracks, aging texture and the occasional plaster repair come up, so framing calls here often include repairs where original framing has shifted or been altered over the years, alongside basement development. We cover Kensington, Albany, Athlone, Baranow and Northwest, 7 days a week.

Kensington rough openings — doors and windows — framed exactly to spec
Bulkheads and soffits for ductwork and lighting
Albany, Athlone, Baranow door and window rough openings framed to spec
Track and stud layout to code — the base for Kensington board
Steel-stud partition wall framing in Kensington
Spacing to code on Kensington track and studs so the drywall lands right
Albany, Athlone, Baranow track and stud spacing set to code for the drywall going over it

Track, studs and how the wall goes together

Different system entirely

Steel framing is track at floor and ceiling with studs inserted and fastened, rather than plates and nails.

Why layout is faster

The track is set to the line first, so the wall position is fixed before a single stud goes in. On a large Kensington layout that makes setting out quicker and more accurate than stick framing.

Kensington drywall in context

About Kensington

Kensington was annexed to the City in 1913 during a real estate boom but most development didn't occur until the 1950s.

What we see in Kensington

In Kensington the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Sound behaviour of steel walls

Actually an advantage

Steel studs are less rigid than wood and transmit vibration less efficiently, so a steel-framed Kensington partition often performs slightly better acoustically than the same wall in wood.

Do not over-claim it

The difference is real but modest. If sound is the goal, the assembly — insulation, layers and sealing — matters far more than the stud material.

Framing for basements and openings in Kensington

Basement development layouts

A basement development layout is the most common metal stud job we do in Albany, Athlone, Baranow — framing bedrooms, bathrooms, a media room or a legal suite to the plan, ready for insulation and drywall.

Openings and bulkheads

We frame partition walls and bulkheads to hide ductwork and provide a clean, level surface for the ceiling and lighting trades.

Fire performance and rated assemblies

Non-combustible

Steel does not burn, which is why it appears in many rated assemblies. That does not make a steel wall rated on its own.

The assembly is what counts

A rated Kensington wall is a specified system — stud type and spacing, board type and layers, joint treatment. We build to the assembly on the drawings rather than assuming steel gives a rating by itself.

What affects the cost of metal stud framing in Kensington in Edmonton?

Wall length, height and layout complexity

The cost of steel-stud framing in Albany, Athlone, Baranow tracks the total wall length and height, the number of openings and bulkheads, and how complex the layout is. We price off the plan or a site walk-through.

Typical framing work in Albany, Athlone, Baranow

Framing calls here often include repairs where original framing has shifted or been altered over the years, alongside basement development.

Boarding onto steel

Different screws, different technique

Steel takes fine-thread screws rather than coarse, and over-driving strips the stud rather than dimpling neatly.

Why crew matters

A crew used to wood will strip fasteners in steel until they adjust. When the same crew frames and boards an Kensington wall, that adjustment has already happened before the first sheet goes up.

How it works

Simple, clean, on schedule — Metal Stud Framing in Kensington Edmonton

Free quote

We come out to your Kensington Edmonton property, take a real look at the metal stud framing, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every metal stud framing quote in Kensington Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the metal stud framing in Kensington Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Kensington Edmonton home while we finish the metal stud framing to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished metal stud framing with us and you're happy with the result in Kensington Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the metal stud framing contractor Kensington Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your metal stud framing project in Kensington Edmonton.

Read our reviews on Google

FAQ — Metal Stud Framing Kensington Edmonton

Metal Stud Framing Kensington Edmonton: your questions answered

Does a steel wall count as fire-rated?: No. Steel is non-combustible, which is why it appears in many rated assemblies, but a rating comes from the whole specified system — stud spacing, board type, layers and joint treatment. We build to the assembly on the drawings.
Do you frame door and window openings in Kensington?: Yes — spec-framed rough openings are built into the Kensington layout.
Is steel framing more expensive?: Often competitive on material and faster to set out on a large straight run. On small irregular Kensington jobs with lots of backing and odd angles, wood is usually quicker and cheaper. We price what suits the job.
Can you coordinate with my Kensington electrician and plumber?: Yes — we sequence Albany, Athlone, Baranow framing so your other trades can rough in cleanly before insulation and drywall go on.
Can you mix steel and wood?: Yes, and often that is the right answer — steel for the long straight partition runs, wood where cabinets, vanities or grab bars are going. We would rather explain the mix than sell one material for everything.
Do you frame door and window openings in Kensington?: Yes — Albany, Athlone, Baranow rough openings are framed to spec as part of the wall layout.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Framing

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Metal Stud Framing Kensington Edmonton

Metal stud framing in Kensington, straight and true