Can I hang a TV on a steel-framed wall?

Only with backing built in. You cannot trust a heavy fixing into a steel stud web. Tell us before the wall closes and we add backing plates or blocking — there is no fallback of hitting a stud like there is in wood.

Is steel better for soundproofing?

Slightly, because steel is less rigid and transmits vibration less efficiently than wood. The difference is real but modest — the assembly, insulation and sealing matter far more than the stud material.

Do you also do the drywall after framing in Highlands?

Yes — one Highlands contract covering frame and drywall, or just the framing for your own drywall crew.

Does a steel wall count as fire-rated?

No. Steel is non-combustible, which is why it appears in many rated assemblies, but a rating comes from the whole specified system — stud spacing, board type, layers and joint treatment. We build to the assembly on the drawings.

Can you mix steel and wood?

Yes, and often that is the right answer — steel for the long straight partition runs, wood where cabinets, vanities or grab bars are going. We would rather explain the mix than sell one material for everything.

Why use steel studs instead of wood?

They arrive straight and stay straight — no warping with humidity, no shrinking, no twisting a finished wall out of plane later. That matters most on long runs, tall walls and where the finish level is high.

Metal Stud Framing Highlands Edmonton | Steel Studs

Steel stud partitions in Highlands for basements and shops

The frame decides the finish: crooked studs, crooked Highlands walls. In Highlands we build steel-stud partition walls, bulkheads and basement layouts — squared, plumbed and spaced to the drywall spec you need. Highlands is an North Central community with a mix of older homes and newer builds, so framing calls range from straightforward basement layouts in the newer homes to repair and alteration work in the older ones nearby. We cover Highlands, Abbottsfield, Alberta Avenue, Beacon Heights and North Central, 7 days a week.

Coordinated with electrical and plumbing rough-in
Highlands track and stud spacing set to code for the drywall going over it
Highlands coverage — we come to you
Steel-stud partition wall framing in Highlands
Spacing to code on Highlands track and studs so the drywall lands right
Highlands door and window rough openings framed to spec
Bulkheads and soffits for ductwork and lighting

Where wood is still the right answer

Fastening and load

Wood takes a screw anywhere along its length, which makes backing, cabinets, handrails and heavy fixings far simpler.

The practical mix

Many Highlands jobs are best framed in steel for the long straight runs and wood where cabinets, vanities or grab bars are going. We would rather explain the mix than sell one material for the whole job.

Highlands drywall in context

About Highlands

Highlands, annexed to the city in 1912, was named in a contest offering a 50-dollar prize.

What we see in Highlands

In Highlands the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Framing for basements and openings in Highlands

Basement development layouts

A basement development layout is the most common metal stud job we do in Abbottsfield, Alberta Avenue, Beacon Heights — framing bedrooms, bathrooms, a media room or a legal suite to the plan, ready for insulation and drywall.

Openings and bulkheads

We frame partition walls and bulkheads to hide ductwork and provide a clean, level surface for the ceiling and lighting trades.

Fire performance and rated assemblies

Non-combustible

Steel does not burn, which is why it appears in many rated assemblies. That does not make a steel wall rated on its own.

The assembly is what counts

A rated Highlands wall is a specified system — stud type and spacing, board type and layers, joint treatment. We build to the assembly on the drawings rather than assuming steel gives a rating by itself.

Sound behaviour of steel walls

Actually an advantage

Steel studs are less rigid than wood and transmit vibration less efficiently, so a steel-framed Highlands partition often performs slightly better acoustically than the same wall in wood.

Do not over-claim it

The difference is real but modest. If sound is the goal, the assembly — insulation, layers and sealing — matters far more than the stud material.

Common metal stud framing situations in Highlands in Edmonton

In Highlands, highlands sits in Edmonton's North Central district. Highlands, annexed to the city in 1912, was named in a contest offering a 50-dollar prize. Across roughly 1,170 homes here, the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We cover Highlands and the surrounding North Central district, 7 days a week. One fixed price after an honest on-site look, and the job done right the first time.

What affects the cost of metal stud framing in Highlands in Edmonton?

Wall length, height and layout complexity

The cost of steel-stud framing in Highlands tracks the total wall length and height, the number of openings and bulkheads, and how complex the layout is. We price off the plan or a site walk-through.

Typical framing work in Highlands

Framing calls range from straightforward basement layouts in the newer homes to repair and alteration work in the older ones nearby.

How it works

Simple, clean, on schedule — Metal Stud Framing in Highlands Edmonton

Free quote

We come out to your Highlands Edmonton property, take a real look at the metal stud framing, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every metal stud framing quote in Highlands Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the metal stud framing in Highlands Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Highlands Edmonton home while we finish the metal stud framing to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished metal stud framing with us and you're happy with the result in Highlands Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the metal stud framing contractor Highlands Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your metal stud framing project in Highlands Edmonton.

Read our reviews on Google

FAQ — Metal Stud Framing Highlands Edmonton

Metal Stud Framing Highlands Edmonton: your questions answered

Can I hang a TV on a steel-framed wall?: Only with backing built in. You cannot trust a heavy fixing into a steel stud web. Tell us before the wall closes and we add backing plates or blocking — there is no fallback of hitting a stud like there is in wood.
Is steel better for soundproofing?: Slightly, because steel is less rigid and transmits vibration less efficiently than wood. The difference is real but modest — the assembly, insulation and sealing matter far more than the stud material.
Do you also do the drywall after framing in Highlands?: Yes — one Highlands contract covering frame and drywall, or just the framing for your own drywall crew.
Does a steel wall count as fire-rated?: No. Steel is non-combustible, which is why it appears in many rated assemblies, but a rating comes from the whole specified system — stud spacing, board type, layers and joint treatment. We build to the assembly on the drawings.
Can you mix steel and wood?: Yes, and often that is the right answer — steel for the long straight partition runs, wood where cabinets, vanities or grab bars are going. We would rather explain the mix than sell one material for everything.
Why use steel studs instead of wood?: They arrive straight and stay straight — no warping with humidity, no shrinking, no twisting a finished wall out of plane later. That matters most on long runs, tall walls and where the finish level is high.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Framing

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Metal Stud Framing Highlands Edmonton

Steel stud partitions in Highlands for basements and shops