Is steel framing more expensive?

Often competitive on material and faster to set out on a large straight run. On small irregular Hawks Ridge jobs with lots of backing and odd angles, wood is usually quicker and cheaper. We price what suits the job.

Do you also do the drywall after framing in Hawks Ridge?

Yes — we frame and drywall Breckenridge Greens, Edgemont, Glastonbury projects as one job with one point of responsibility, or frame only for your own crew.

Can my Hawks Ridge electrician and plumber rough in around your framing?

Yes — in Hawks Ridge we frame in a sequence that lets electrical and plumbing rough in before close-up.

Do you also do the drywall after framing in Hawks Ridge?

Yes — one Hawks Ridge contract covering frame and drywall, or just the framing for your own drywall crew.

Do you coordinate Hawks Ridge framing with electricians and plumbers?

Yes — trades rough in cleanly because the Hawks Ridge framing is sequenced for them, ahead of insulation and drywall.

Can you mix steel and wood?

Yes, and often that is the right answer — steel for the long straight partition runs, wood where cabinets, vanities or grab bars are going. We would rather explain the mix than sell one material for everything.

Metal Stud Framing Hawks Ridge Edmonton | Steel Studs

Metal stud framing in Breckenridge Greens, Edgemont, Glastonbury, square and ready for drywall

A finished Hawks Ridge space is only as straight as the frame beneath it. In Hawks Ridge we build steel-stud partition walls, bulkheads and basement layouts — squared, plumbed and spaced to the drywall spec you need. Hawks Ridge is an older West Henday community where settling cracks, aging texture and the occasional plaster repair come up, so framing calls here often include repairs where original framing has shifted or been altered over the years, alongside basement development. We cover Hawks Ridge, Breckenridge Greens, Edgemont, Glastonbury and West Henday, 7 days a week.

Bulkheads and soffits for ductwork and lighting
Steel-stud partition wall framing in Breckenridge Greens, Edgemont, Glastonbury
Steel-stud partition wall framing in Hawks Ridge
Coordinated with electrical and plumbing rough-in
Track and stud layout to code — the base for Hawks Ridge board
Breckenridge Greens, Edgemont, Glastonbury track and stud spacing set to code for the drywall going over it
Breckenridge Greens, Edgemont, Glastonbury door and window rough openings framed to spec

Backing in a steel wall

Plan it, because you cannot improvise

You cannot simply screw a heavy fixing into a steel stud web and trust it. Backing plates or wood blocking have to be built in where anything is being hung.

Ask before it closes

TV mounts, cabinets, grab bars, shelving, handrails. In an Hawks Ridge steel wall this is more important than in wood, because there is no fallback of hitting a stud.

Why Hawks Ridge homeowners trust Emplastrum for metal stud framing in Edmonton

Square framing makes a flat finish possible

As a drywall and finishing company first, we frame walls the way we want to drywall them — square, plumb and properly spaced — because a crooked frame can never be fully hidden by finishing in Hawks Ridge.

Fixed price, same-day reply

We cover Hawks Ridge and West Henday, 7 days a week. Free at-home Hawks Ridge quoting, fixed pricing, and work we stand behind.

Framing for basements and openings in Hawks Ridge

Basement development layouts

A basement development layout is the most common metal stud job we do in Hawks Ridge — framing bedrooms, bathrooms, a media room or a legal suite to the plan, ready for insulation and drywall.

Openings and bulkheads

We frame partition walls and bulkheads to hide ductwork and provide a clean, level surface for the ceiling and lighting trades.

Sound behaviour of steel walls

Actually an advantage

Steel studs are less rigid than wood and transmit vibration less efficiently, so a steel-framed Hawks Ridge partition often performs slightly better acoustically than the same wall in wood.

Do not over-claim it

The difference is real but modest. If sound is the goal, the assembly — insulation, layers and sealing — matters far more than the stud material.

Gauge, and why it is not all the same steel

Thickness matters

Interior non-load-bearing partitions use a lighter gauge than walls carrying weight or spanning tall. Using the lightest available everywhere gives walls that feel flimsy and telegraph movement.

What we specify

Gauge to suit the wall height and what the wall has to carry. In an Hawks Ridge basement with an 8-foot ceiling that is straightforward; a tall stairwell wall is not.

Fire performance and rated assemblies

Non-combustible

Steel does not burn, which is why it appears in many rated assemblies. That does not make a steel wall rated on its own.

The assembly is what counts

A rated Hawks Ridge wall is a specified system — stud type and spacing, board type and layers, joint treatment. We build to the assembly on the drawings rather than assuming steel gives a rating by itself.

How it works

Simple, clean, on schedule — Metal Stud Framing in Hawks Ridge Edmonton

Free quote

We come out to your Hawks Ridge Edmonton property, take a real look at the metal stud framing, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every metal stud framing quote in Hawks Ridge Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the metal stud framing in Hawks Ridge Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Hawks Ridge Edmonton home while we finish the metal stud framing to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished metal stud framing with us and you're happy with the result in Hawks Ridge Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the metal stud framing contractor Hawks Ridge Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your metal stud framing project in Hawks Ridge Edmonton.

Read our reviews on Google

FAQ — Metal Stud Framing Hawks Ridge Edmonton

Metal Stud Framing Hawks Ridge Edmonton: your questions answered

Is steel framing more expensive?: Often competitive on material and faster to set out on a large straight run. On small irregular Hawks Ridge jobs with lots of backing and odd angles, wood is usually quicker and cheaper. We price what suits the job.
Do you also do the drywall after framing in Hawks Ridge?: Yes — we frame and drywall Breckenridge Greens, Edgemont, Glastonbury projects as one job with one point of responsibility, or frame only for your own crew.
Can my Hawks Ridge electrician and plumber rough in around your framing?: Yes — in Hawks Ridge we frame in a sequence that lets electrical and plumbing rough in before close-up.
Do you also do the drywall after framing in Hawks Ridge?: Yes — one Hawks Ridge contract covering frame and drywall, or just the framing for your own drywall crew.
Do you coordinate Hawks Ridge framing with electricians and plumbers?: Yes — trades rough in cleanly because the Hawks Ridge framing is sequenced for them, ahead of insulation and drywall.
Can you mix steel and wood?: Yes, and often that is the right answer — steel for the long straight partition runs, wood where cabinets, vanities or grab bars are going. We would rather explain the mix than sell one material for everything.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Framing

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Metal Stud Framing Hawks Ridge Edmonton

Metal stud framing in Breckenridge Greens, Edgemont, Glastonbury, square and ready for drywall