Does a steel wall count as fire-rated?

No. Steel is non-combustible, which is why it appears in many rated assemblies, but a rating comes from the whole specified system — stud spacing, board type, layers and joint treatment. We build to the assembly on the drawings.

Do you also do the drywall after framing in Forest Heights?

Yes — one Forest Heights contract covering frame and drywall, or just the framing for your own drywall crew.

Can I hang a TV on a steel-framed wall?

Only with backing built in. You cannot trust a heavy fixing into a steel stud web. Tell us before the wall closes and we add backing plates or blocking — there is no fallback of hitting a stud like there is in wood.

Is steel better for soundproofing?

Slightly, because steel is less rigid and transmits vibration less efficiently than wood. The difference is real but modest — the assembly, insulation and sealing matter far more than the stud material.

Do you stand behind your framing work in Forest Heights?

Yes. We check every Forest Heights layout is square before we hand it off, and if something is not right we come back and make it right.

Is steel framing more expensive?

Often competitive on material and faster to set out on a large straight run. On small irregular Forest Heights jobs with lots of backing and odd angles, wood is usually quicker and cheaper. We price what suits the job.

Metal Stud Framing Forest Heights Edmonton | Steel Studs

Steel stud partitions in Forest Heights for basements and shops

A finished Forest Heights space is only as straight as the frame beneath it. In Forest Heights we build steel-stud partition walls, bulkheads and basement layouts — squared, plumbed and spaced to the drywall spec you need. Forest Heights is an older Southeast community where settling cracks, aging texture and the occasional plaster repair come up, so framing calls here often include repairs where original framing has shifted or been altered over the years, alongside basement development. We cover Forest Heights, Avonmore, Bonnie Doon, Capilano and Southeast, 7 days a week.

Bulkheads and soffits for ductwork and lighting
Spacing to code on Forest Heights track and studs so the drywall lands right
Avonmore, Bonnie Doon, Capilano track and stud spacing set to code for the drywall going over it
Track and stud layout to code — the base for Forest Heights board
Forest Heights door and window rough openings framed to spec
Forest Heights track and stud spacing set to code for the drywall going over it
To-spec door and window openings in every Forest Heights frame

Framing for basements and openings in Forest Heights

Basement development layouts

A basement development layout is the most common metal stud job we do in Forest Heights — framing bedrooms, bathrooms, a media room or a legal suite to the plan, ready for insulation and drywall.

Openings and bulkheads

We frame partition walls and bulkheads to hide ductwork and provide a clean, level surface for the ceiling and lighting trades.

Forest Heights drywall in context

About Forest Heights

The winding green curves of the North Saskatchewan River Valley figure prominently in Forest Heights.

What we see in Forest Heights

In Forest Heights the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Why Forest Heights homeowners trust Emplastrum for metal stud framing in Edmonton

Square framing makes a flat finish possible

As a drywall and finishing company first, we frame walls the way we want to drywall them — square, plumb and properly spaced — because a crooked frame can never be fully hidden by finishing in Forest Heights.

Fixed price, same-day reply

We cover Forest Heights and Southeast, 7 days a week. Free at-home Forest Heights quoting, fixed pricing, and work we stand behind.

Framing for basements and openings in Forest Heights

Basement development layouts

A basement development layout is the most common metal stud job we do in Avonmore, Bonnie Doon, Capilano — framing bedrooms, bathrooms, a media room or a legal suite to the plan, ready for insulation and drywall.

Openings and bulkheads

We frame partition walls and bulkheads to hide ductwork and provide a clean, level surface for the ceiling and lighting trades.

Why Forest Heights homeowners trust Emplastrum for metal stud framing in Edmonton

Square framing makes a flat finish possible

Fixed price, same-day reply

We cover Avonmore, Bonnie Doon, Capilano and Southeast, 7 days a week. Free on-site Avonmore, Bonnie Doon, Capilano quotes and fixed prices, and we stand behind the work.

Running services through steel

Knockouts and grommets

Steel studs come with knockouts for wiring, and cables must be protected where they pass through — a bare cable against a cut steel edge is a hazard.

Coordination

Grommets or bushings go in as the wiring is run. We would rather walk the route with the electrician than have cables pulled through unprotected openings and discovered at inspection.

Where steel beats wood in an Forest Heights build

Straightness that stays

Steel studs arrive straight and stay straight. They do not warp with humidity, do not shrink as they dry, and do not twist a finished wall out of plane a year later.

Where it matters most

Long partition runs, tall walls and anywhere the finish level is high. In a basement or a shop the moisture and rot resistance matter as well.

How it works

Simple, clean, on schedule — Metal Stud Framing in Forest Heights Edmonton

Free quote

We come out to your Forest Heights Edmonton property, take a real look at the metal stud framing, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every metal stud framing quote in Forest Heights Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the metal stud framing in Forest Heights Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Forest Heights Edmonton home while we finish the metal stud framing to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished metal stud framing with us and you're happy with the result in Forest Heights Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the metal stud framing contractor Forest Heights Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your metal stud framing project in Forest Heights Edmonton.

Read our reviews on Google

FAQ — Metal Stud Framing Forest Heights Edmonton

Metal Stud Framing Forest Heights Edmonton: your questions answered

Does a steel wall count as fire-rated?: No. Steel is non-combustible, which is why it appears in many rated assemblies, but a rating comes from the whole specified system — stud spacing, board type, layers and joint treatment. We build to the assembly on the drawings.
Do you also do the drywall after framing in Forest Heights?: Yes — one Forest Heights contract covering frame and drywall, or just the framing for your own drywall crew.
Can I hang a TV on a steel-framed wall?: Only with backing built in. You cannot trust a heavy fixing into a steel stud web. Tell us before the wall closes and we add backing plates or blocking — there is no fallback of hitting a stud like there is in wood.
Is steel better for soundproofing?: Slightly, because steel is less rigid and transmits vibration less efficiently than wood. The difference is real but modest — the assembly, insulation and sealing matter far more than the stud material.
Do you stand behind your framing work in Forest Heights?: Yes. We check every Forest Heights layout is square before we hand it off, and if something is not right we come back and make it right.
Is steel framing more expensive?: Often competitive on material and faster to set out on a large straight run. On small irregular Forest Heights jobs with lots of backing and odd angles, wood is usually quicker and cheaper. We price what suits the job.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Framing

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Metal Stud Framing Forest Heights Edmonton

Steel stud partitions in Forest Heights for basements and shops