Can you coordinate with my Daly Grove electrician and plumber?

Yes — we sequence Daly Grove framing so your other trades can rough in cleanly before insulation and drywall go on.

Is steel framing more expensive?

Often competitive on material and faster to set out on a large straight run. On small irregular Daly Grove jobs with lots of backing and odd angles, wood is usually quicker and cheaper. We price what suits the job.

Can my Daly Grove electrician and plumber rough in around your framing?

Yes — in Daly Grove we frame in a sequence that lets electrical and plumbing rough in before close-up.

Do you also do the drywall after framing in Daly Grove?

Yes — one Daly Grove contract covering frame and drywall, or just the framing for your own drywall crew.

Can I hang a TV on a steel-framed wall?

Only with backing built in. You cannot trust a heavy fixing into a steel stud web. Tell us before the wall closes and we add backing plates or blocking — there is no fallback of hitting a stud like there is in wood.

Can you mix steel and wood?

Yes, and often that is the right answer — steel for the long straight partition runs, wood where cabinets, vanities or grab bars are going. We would rather explain the mix than sell one material for everything.

Metal Stud Framing Daly Grove Edmonton | Steel Studs

Metal stud framing in Daly Grove, square and ready for drywall

A finished Bisset, Crawford Plains, Ekota space is only as straight as the frame beneath it. In Bisset, Crawford Plains, Ekota we build steel-stud partition walls, bulkheads and basement layouts — squared, plumbed and spaced to the drywall spec you need. Bisset, Crawford Plains, Ekota is an older Mill Woods and Meadows community where settling cracks, aging texture and the occasional plaster repair come up, so framing calls here often include repairs where original framing has shifted or been altered over the years, alongside basement development. We cover Bisset, Crawford Plains, Ekota and Mill Woods and Meadows, 7 days a week.

Spacing to code on Daly Grove track and studs so the drywall lands right
Daly Grove rough openings — doors and windows — framed exactly to spec
Daly Grove door and window rough openings framed to spec
Bisset, Crawford Plains, Ekota coverage — we come to you
To-spec door and window openings in every Daly Grove frame
Daly Grove track and stud spacing set to code for the drywall going over it
Bulkheads and soffits for ductwork and lighting

Where wood is still the right answer

Fastening and load

Wood takes a screw anywhere along its length, which makes backing, cabinets, handrails and heavy fixings far simpler.

The practical mix

Many Daly Grove jobs are best framed in steel for the long straight runs and wood where cabinets, vanities or grab bars are going. We would rather explain the mix than sell one material for the whole job.

Daly Grove drywall in context

About Daly Grove

Named in honour of Thomas Daly, who developed high quality strains of wheat and oats, Daly Grove's predominantly single family homes were built in the 1980s.

What we see in Daly Grove

In Daly Grove the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Our Daly Grove metal stud framing process in Edmonton, step by step

Layout first

We lay out track lines on the floor and ceiling from the plan or your walk-through direction, confirming every wall location before a single stud goes up in your Bisset, Crawford Plains, Ekota space.

Frame square and plumb

We install track, cut and set the studs to spacing, and check every wall for square and plumb as we go — the framing stage is where a crooked wall gets built or avoided. See our basement drywall work in Bisset, Crawford Plains, Ekota once the frame is up.

Why Daly Grove homeowners trust Emplastrum for metal stud framing in Edmonton

Square framing makes a flat finish possible

As a drywall and finishing company first, we frame walls the way we want to drywall them — square, plumb and properly spaced — because a crooked frame can never be fully hidden by finishing in Daly Grove.

Fixed price, same-day reply

We cover Daly Grove and Mill Woods and Meadows, 7 days a week. Free at-home Daly Grove quoting, fixed pricing, and work we stand behind.

Boarding onto steel

Different screws, different technique

Steel takes fine-thread screws rather than coarse, and over-driving strips the stud rather than dimpling neatly.

Why crew matters

A crew used to wood will strip fasteners in steel until they adjust. When the same crew frames and boards an Daly Grove wall, that adjustment has already happened before the first sheet goes up.

Gauge, and why it is not all the same steel

Thickness matters

Interior non-load-bearing partitions use a lighter gauge than walls carrying weight or spanning tall. Using the lightest available everywhere gives walls that feel flimsy and telegraph movement.

What we specify

Gauge to suit the wall height and what the wall has to carry. In an Daly Grove basement with an 8-foot ceiling that is straightforward; a tall stairwell wall is not.

Running services through steel

Knockouts and grommets

Steel studs come with knockouts for wiring, and cables must be protected where they pass through — a bare cable against a cut steel edge is a hazard.

Coordination

Grommets or bushings go in as the wiring is run. We would rather walk the route with the electrician than have cables pulled through unprotected openings and discovered at inspection.

How it works

Simple, clean, on schedule — Metal Stud Framing in Daly Grove Edmonton

Free quote

We come out to your Daly Grove Edmonton property, take a real look at the metal stud framing, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every metal stud framing quote in Daly Grove Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the metal stud framing in Daly Grove Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Daly Grove Edmonton home while we finish the metal stud framing to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished metal stud framing with us and you're happy with the result in Daly Grove Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the metal stud framing contractor Daly Grove Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your metal stud framing project in Daly Grove Edmonton.

Read our reviews on Google

FAQ — Metal Stud Framing Daly Grove Edmonton

Metal Stud Framing Daly Grove Edmonton: your questions answered

Can you coordinate with my Daly Grove electrician and plumber?: Yes — we sequence Daly Grove framing so your other trades can rough in cleanly before insulation and drywall go on.
Is steel framing more expensive?: Often competitive on material and faster to set out on a large straight run. On small irregular Daly Grove jobs with lots of backing and odd angles, wood is usually quicker and cheaper. We price what suits the job.
Can my Daly Grove electrician and plumber rough in around your framing?: Yes — in Daly Grove we frame in a sequence that lets electrical and plumbing rough in before close-up.
Do you also do the drywall after framing in Daly Grove?: Yes — one Daly Grove contract covering frame and drywall, or just the framing for your own drywall crew.
Can I hang a TV on a steel-framed wall?: Only with backing built in. You cannot trust a heavy fixing into a steel stud web. Tell us before the wall closes and we add backing plates or blocking — there is no fallback of hitting a stud like there is in wood.
Can you mix steel and wood?: Yes, and often that is the right answer — steel for the long straight partition runs, wood where cabinets, vanities or grab bars are going. We would rather explain the mix than sell one material for everything.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Framing

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Metal Stud Framing Daly Grove Edmonton

Metal stud framing in Daly Grove, square and ready for drywall