Can you coordinate with my Allendale electrician and plumber?

Yes — we sequence Allendale framing so your other trades can rough in cleanly before insulation and drywall go on.

Do you frame door and window openings in Allendale?

Yes — Argyll, Belgravia, CPR Irvine rough openings are framed to spec as part of the wall layout.

Do you stand behind your framing work in Allendale?

Yes. We check every Argyll, Belgravia, CPR Irvine layout is square before we hand it off, and if something is not right we come back and make it right.

Do you also do the drywall after framing in Allendale?

Yes — we frame and drywall Argyll, Belgravia, CPR Irvine projects as one job with one point of responsibility, or frame only for your own crew.

Is steel better for soundproofing?

Slightly, because steel is less rigid and transmits vibration less efficiently than wood. The difference is real but modest — the assembly, insulation and sealing matter far more than the stud material.

Can you mix steel and wood?

Yes, and often that is the right answer — steel for the long straight partition runs, wood where cabinets, vanities or grab bars are going. We would rather explain the mix than sell one material for everything.

Metal Stud Framing Allendale Edmonton | Steel Studs

Metal stud framing in Allendale, straight and true

The frame decides the finish: crooked studs, crooked Allendale walls. In Allendale we build steel-stud partition walls, bulkheads and basement layouts — squared, plumbed and spaced to the drywall spec you need. Allendale is an Scona community with a mix of older homes and newer builds, so framing calls range from straightforward basement layouts in the newer homes to repair and alteration work in the older ones nearby. We cover Allendale, Argyll, Belgravia, CPR Irvine and Scona, 7 days a week.

Bulkheads and soffits for ductwork and lighting
Allendale rough openings — doors and windows — framed exactly to spec
Allendale track and stud spacing set to code for the drywall going over it
Allendale coverage — we come to you
Argyll, Belgravia, CPR Irvine coverage — we come to you
Spacing to code on Allendale track and studs so the drywall lands right
Steel-stud partition wall framing in Allendale

Where wood is still the right answer

Fastening and load

Wood takes a screw anywhere along its length, which makes backing, cabinets, handrails and heavy fixings far simpler.

The practical mix

Many Allendale jobs are best framed in steel for the long straight runs and wood where cabinets, vanities or grab bars are going. We would rather explain the mix than sell one material for the whole job.

Allendale drywall in context

About Allendale

Once farmed by the Allen family, this area was annexed by the City of Strathcona in 1907 and became part of Edmonton in 1912 when Strathcona and Edmonton amalgamated.

What we see in Allendale

In Allendale the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Framing for basements and openings in Allendale

Basement development layouts

A basement development layout is the most common metal stud job we do in Allendale — framing bedrooms, bathrooms, a media room or a legal suite to the plan, ready for insulation and drywall.

Openings and bulkheads

We frame partition walls and bulkheads to hide ductwork and provide a clean, level surface for the ceiling and lighting trades.

Gauge, and why it is not all the same steel

Thickness matters

Interior non-load-bearing partitions use a lighter gauge than walls carrying weight or spanning tall. Using the lightest available everywhere gives walls that feel flimsy and telegraph movement.

What we specify

Gauge to suit the wall height and what the wall has to carry. In an Allendale basement with an 8-foot ceiling that is straightforward; a tall stairwell wall is not.

Cost, and when steel is actually cheaper

Material against labour

Steel is often competitive on material and can be faster to set out on a large straight run. On small, irregular Allendale jobs with lots of backing and odd angles, wood is usually quicker.

How we quote

We price the material that suits the job rather than defaulting, and tell you where the difference actually comes from.

Our Allendale metal stud framing process in Edmonton, step by step

Layout first

We lay out track lines on the floor and ceiling from the plan or your walk-through direction, confirming every wall location before a single stud goes up in your Argyll, Belgravia, CPR Irvine space.

Frame square and plumb

We install track, cut and set the studs to spacing, and check every wall for square and plumb as we go — the framing stage is where a crooked wall gets built or avoided. See our basement drywall work in Argyll, Belgravia, CPR Irvine once the frame is up.

Running services through steel

Knockouts and grommets

Steel studs come with knockouts for wiring, and cables must be protected where they pass through — a bare cable against a cut steel edge is a hazard.

Coordination

Grommets or bushings go in as the wiring is run. We would rather walk the route with the electrician than have cables pulled through unprotected openings and discovered at inspection.

How it works

Simple, clean, on schedule — Metal Stud Framing in Allendale Edmonton

Free quote

We come out to your Allendale Edmonton property, take a real look at the metal stud framing, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every metal stud framing quote in Allendale Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the metal stud framing in Allendale Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Allendale Edmonton home while we finish the metal stud framing to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished metal stud framing with us and you're happy with the result in Allendale Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the metal stud framing contractor Allendale Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your metal stud framing project in Allendale Edmonton.

Read our reviews on Google

FAQ — Metal Stud Framing Allendale Edmonton

Metal Stud Framing Allendale Edmonton: your questions answered

Can you coordinate with my Allendale electrician and plumber?: Yes — we sequence Allendale framing so your other trades can rough in cleanly before insulation and drywall go on.
Do you frame door and window openings in Allendale?: Yes — Argyll, Belgravia, CPR Irvine rough openings are framed to spec as part of the wall layout.
Do you stand behind your framing work in Allendale?: Yes. We check every Argyll, Belgravia, CPR Irvine layout is square before we hand it off, and if something is not right we come back and make it right.
Do you also do the drywall after framing in Allendale?: Yes — we frame and drywall Argyll, Belgravia, CPR Irvine projects as one job with one point of responsibility, or frame only for your own crew.
Is steel better for soundproofing?: Slightly, because steel is less rigid and transmits vibration less efficiently than wood. The difference is real but modest — the assembly, insulation and sealing matter far more than the stud material.
Can you mix steel and wood?: Yes, and often that is the right answer — steel for the long straight partition runs, wood where cabinets, vanities or grab bars are going. We would rather explain the mix than sell one material for everything.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Framing

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Metal Stud Framing Allendale Edmonton

Metal stud framing in Allendale, straight and true