Loose Fill Insulation Ebbers Edmonton

Blown-in insulation for Ebbers attics and closed cavities

Blown-in material fills the awkward parts of an Ebbers building that batts leave gapped — around cross-bracing, over the top plates of interior walls, into the shallow triangle at the eaves. It settles over time, which is why it is specified at a settled depth rather than the depth it looks on the day. Air sealing comes first, because loose material laid over an open ceiling penetration hides the leak instead of stopping it.

• Ceiling penetrations air-sealed first, not buried
• Depth read back at the corners, not just where the hatch is
• Baffles at the eaves so soffit venting stays clear
• Settled depth specified and marked before the hose starts
• Existing material assessed — topped up, or removed if it is wet or contaminated
• Even coverage carried right out over the top plates

Loose Fill Insulation Ebbers Edmonton

Knob-and-tube and older wiring

Ebbers drywall in context

Access, hoses and how much of the house we cross

Loose-fill or batts, decided on the space

Cellulose or fibreglass, and when it matters

Bag count is the honest check

Blowing into a wall that is already closed

Simple, clean, on schedule — Drywall in Edmonton

Loose Fill Insulation Ebbers Edmonton: your questions answered

Cellulose or fibreglass?

Both work. Cellulose is denser, packs into odd shapes and resists air movement through it better; fibreglass is lighter, which matters on a ceiling of uncertain strength. Where there is existing material, matching it is usually simpler than layering the other over it.

What do I get when the job is done?

The bag count, the target settled depth, and photographs of the finished space including the corners and the eaves — so you can confirm years later what was actually installed instead of probing a hole and guessing.

Is blown-in better than batts?

In an attic, usually yes, because it flows around trusses, bracing and wiring where batts get cut short or forced and leave gaps. In open framed walls at regular spacing, batts are fine. We recommend by the space, not by what is on the truck.

Will it block my soffit vents?

Not if baffles go in first. Loose material can also be pushed around by wind at the eaves, so the baffles both hold it clear of the vents and stop the edge being scoured thin — which is exactly where the house loses heat.

How do I know I got what I paid for?

Bag count. Every bag states the area it covers at a given depth, so bags used divided by area is exactly what went in. We keep them, mark the target settled depth, and read the depth back at the corners rather than the middle.

My bathroom fan vents into the attic. Does that matter?

A great deal — it is the fastest way to soak an attic from inside. We look for it while the space is open and flag it before covering anything rather than blowing over the top of it.