Loose Fill Insulation Brander Gardens

Loose-fill insulation in Brander Gardens — settled depth is what you are buying

Blown-in material fills the awkward parts of an Brander Gardens building that batts leave gapped — around cross-bracing, over the top plates of interior walls, into the shallow triangle at the eaves. It settles over time, which is why it is specified at a settled depth rather than the depth it looks on the day. Air sealing comes first, because loose material laid over an open ceiling penetration hides the leak instead of stopping it.

• Existing material assessed — topped up, or removed if it is wet or contaminated
• Depth read back at the corners, not just where the hatch is
• Baffles at the eaves so soffit venting stays clear
• Ceiling penetrations air-sealed first, not buried
• Even coverage carried right out over the top plates
• Settled depth specified and marked before the hose starts

Loose Fill Insulation Brander Gardens

Filling around bracing and trusses

Brander Gardens drywall in context

Pot lights buried in loose material

Settled depth versus installed depth

Bath fans and the ducts above the ceiling

Moisture is what ruins it

Cellulose or fibreglass, and when it matters

Simple, clean, on schedule — Drywall in Edmonton

Loose Fill Insulation Brander Gardens: your questions answered

What about my pot lights?

Older recessed fixtures are not all rated to be covered and loose-fill packs right against them. We check the rating, and where they are not rated they get a proper clearance detail that is also sealed, rather than being buried and hoped about.

Will it block my soffit vents?

Not if baffles go in first. Loose material can also be pushed around by wind at the eaves, so the baffles both hold it clear of the vents and stop the edge being scoured thin — which is exactly where the house loses heat.

How do I know I got what I paid for?

Bag count. Every bag states the area it covers at a given depth, so bags used divided by area is exactly what went in. We keep them, mark the target settled depth, and read the depth back at the corners rather than the middle.

What do I get when the job is done?

The bag count, the target settled depth, and photographs of the finished space including the corners and the eaves — so you can confirm years later what was actually installed instead of probing a hole and guessing.

My bathroom fan vents into the attic. Does that matter?

A great deal — it is the fastest way to soak an attic from inside. We look for it while the space is open and flag it before covering anything rather than blowing over the top of it.

Can you blow insulation into my walls without opening them?

Often yes — dense-pack through small holes, packed hard enough that it does not slump and leave a cold band at the top. The holes then need filling and finishing, which is drywall work, so we quote that with it rather than surprising you.