Do you build the Ogilvie Ridge fire and sound separation?

Yes — the fire-rated suite-to-main ceiling and sound-dampened party walls are core to an Ogilvie Ridge legal suite, and we install both to spec.

What if the inspector fails something?

We ask for the note directly rather than a summary, fix exactly what was cited and re-present. Most failures are specific — an unsealed penetration or an untaped rated joint — and working from the actual wording avoids fixing the wrong thing.

Is the ceiling or the wall the bigger job in a suite?

Usually the ceiling, because it carries both the fire separation and most of the sound transmission between units. It is also where the mechanical runs and penetrations are, so it needs the most coordination with the other trades.

Do you work from my permit drawings?

Yes, and we would rather see them before quoting. The assemblies are a specification, not a preference, and the drawings decide the board, the layers and the joint treatment. If what is specified does not match what is on site, we tell you before boarding.

Is the full Ogilvie Ridge suite — all the drywall — one job for you?

Yes — fire, sound, moisture board, boarding and finishing as one job in your Ogilvie Ridge home, coordinated with your other trades.

Can the entire Ogilvie Ridge suite drywall run as a single contract?

Yes — fire, sound, moisture board, boarding and finishing as one job in your Ogilvie Ridge home, coordinated with your other trades.

Legal Suite Drywall Ogilvie Ridge Edmonton | Suite Drywall

Legal suite drywall in Ogilvie Ridge, built to the approved drawings

A legal suite in Ogilvie Ridge lives or dies on two assemblies: the fire separation between the units and the sound separation between them. Both are specified on the drawings your permit was issued against, and both are inspected before anything covers them. We build to those drawings and sequence around the inspection rather than working ahead.

Sound-dampened party and demising walls
Inspection-ready fire and sound assemblies
Moisture-resistant board in bathrooms and wet areas
Boarding and finishing to the City of Edmonton suite spec
Ogilvie Ridge coverage — we come to you
Fire-rated suite-to-main-floor ceiling separation in Ogilvie Ridge
Finished flat and paint-ready

Sequencing around your inspections

Inspected before covered

Rated and sound assemblies in Ogilvie Ridge are checked before the finish goes on. That sets the order of work, not the other way round.

How we plan it

We board and firestop to suit your inspection date rather than working ahead. If an inspection slips, we would rather pause than cover something the inspector needs to see.

Penetrations: the part that fails inspections

Every hole is a path

Electrical boxes, plumbing, ducting and pot lights all pierce a rated Ogilvie Ridge assembly. Unsealed, each one is a route for fire and smoke and a leak for sound.

Sequencing with trades

Firestopping happens before the finish. We coordinate so penetrations are made and sealed before we tape, rather than cutting into a finished rated ceiling later and leaving it open behind the paint.

The two assemblies a suite lives on

Fire and sound

A legal suite in Ogilvie Ridge depends on a fire separation between the dwelling units and a sound separation between them. They are different requirements built into the same walls and ceilings.

Both are specified

Neither is a matter of preference. Both come off the drawings your permit was issued against, and both are inspected before anything covers them.

If the inspection does not pass

We want the note

Most Ogilvie Ridge suite failures are specific: an unsealed penetration, an untaped rated joint, a screw pattern, a missing layer.

How we handle it

We ask for the inspector's note directly rather than a second-hand summary, fix exactly what was cited, and re-present. Working from the actual wording is faster and avoids fixing the wrong thing twice.

Fire, sound and moisture in an Ogilvie Ridge suite

Fire and sound separation

An Ogilvie Ridge legal suite needs a fire-rated ceiling and sound-dampened separation so it is safe and liveable. Both assemblies are built into the Ogilvie Ridge drywall.

Finish and wet zones

Bathrooms get moisture-resistant board; everything finishes flat and paint-ready. Ogilvie Ridge readers can dig into Fire-Rated Drywall Edmonton and Soundproofing Edmonton for the assemblies.

Ceiling height and what it costs you

Assemblies take space

A rated, sound-dampened Ogilvie Ridge basement ceiling with resilient channel and two layers of board takes more height than a simple boarded ceiling.

The trade-off

In a basement where headroom is already tight, every assembly decision costs ceiling height. We tell you what each option takes so the trade is made deliberately rather than discovered when the drywall is up.

How it works

Simple, clean, on schedule — Legal Suite Drywall in Ogilvie Ridge Edmonton

Free quote

We come out to your Ogilvie Ridge Edmonton property, take a real look at the legal suite drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every legal suite drywall quote in Ogilvie Ridge Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the legal suite drywall in Ogilvie Ridge Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Ogilvie Ridge Edmonton home while we finish the legal suite drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished legal suite drywall with us and you're happy with the result in Ogilvie Ridge Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the legal suite drywall contractor Ogilvie Ridge Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your legal suite drywall project in Ogilvie Ridge Edmonton.

Read our reviews on Google

FAQ — Legal Suite Drywall Ogilvie Ridge Edmonton

Legal Suite Drywall Ogilvie Ridge Edmonton: your questions answered

Do you build the Ogilvie Ridge fire and sound separation?: Yes — the fire-rated suite-to-main ceiling and sound-dampened party walls are core to an Ogilvie Ridge legal suite, and we install both to spec.
What if the inspector fails something?: We ask for the note directly rather than a summary, fix exactly what was cited and re-present. Most failures are specific — an unsealed penetration or an untaped rated joint — and working from the actual wording avoids fixing the wrong thing.
Is the ceiling or the wall the bigger job in a suite?: Usually the ceiling, because it carries both the fire separation and most of the sound transmission between units. It is also where the mechanical runs and penetrations are, so it needs the most coordination with the other trades.
Do you work from my permit drawings?: Yes, and we would rather see them before quoting. The assemblies are a specification, not a preference, and the drawings decide the board, the layers and the joint treatment. If what is specified does not match what is on site, we tell you before boarding.
Is the full Ogilvie Ridge suite — all the drywall — one job for you?: Yes — fire, sound, moisture board, boarding and finishing as one job in your Ogilvie Ridge home, coordinated with your other trades.
Can the entire Ogilvie Ridge suite drywall run as a single contract?: Yes — fire, sound, moisture board, boarding and finishing as one job in your Ogilvie Ridge home, coordinated with your other trades.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Legal Suite Drywall Ogilvie Ridge Edmonton

Legal suite drywall in Ogilvie Ridge, built to the approved drawings