Can I stay in the house?

Yes, with containment. The room itself is out of use while it is worked, and despite sealing, some fine dust will find its way past. We will not promise a dust-free ceiling scrape.

Do I need to worry about asbestos?

If the Steinhauer home is pre-1990 and the material is unknown, it gets tested before anyone scrapes — scraping is exactly what makes it airborne. Where it is present, skimming over without disturbance is often safer and cheaper than removal.

My ceiling has been painted. Does that change things?

Yes, significantly. Paint seals the texture so it no longer wets out, and dry scraping damages the board underneath. Skimming over it in thin coats is the honest route and usually less disruptive.

Should the texture be scraped off or skimmed over?

It depends on whether it releases. We wet and scrape a test patch in Steinhauer first: if it softens cleanly, scraping gives the flattest result; if it has been painted it will not soften, and scraping tears the board face. Then skimming is the better ceiling.

Can you fix cracks while the texture is off in my Steinhauer home?

Yes — with the knockdown off in Steinhauer, cracks, nail pops and stains are repaired before the skim, so the finished ceiling is clean and sound.

Is it better to scrape the knockdown or skim over it?

It depends what is underneath. If the texture releases cleanly and the board and tape below are sound, scraping gives the flattest result. If the texture is painted hard or the tape is failing, skimming over it is faster, cleaner and often the better ceiling. We test a patch in Steinhauer before quoting.

Knockdown Ceiling Removal Steinhauer Edmonton | Texture Scraping

Textured ceilings in Steinhauer, scraped or skimmed to smooth

There are two honest ways to get rid of a knockdown ceiling in Steinhauer: scrape it off, or skim over it. Which one we recommend depends on whether the texture releases cleanly and what condition the board and tape underneath are in. We test a patch before quoting rather than assuming.

Clean re-texture for Steinhauer ceilings if you prefer a new finish
Level 4 or Level 5 flat ceilings — the Steinhauer standard
Flat Level 4 or Level 5 skim finish for Steinhauer homes
Steinhauer ceilings skimmed to a flat Level 4 or Level 5
Skim to flat Level 4 or Level 5 on Steinhauer ceilings
Full dust control and floor protection
Crack and stain repair included while your Steinhauer ceiling is exposed

The wall junction

The line your eye follows

Where an Steinhauer ceiling meets the wall is the most visible line in the room, and it is where a scraped ceiling most often looks unfinished.

Detailing it

The junction is cut in cleanly and the skim carried right into the corner rather than feathered out short. Where crown moulding is going back on it matters less; where it is not, this line is the job.

Steinhauer drywall in context

About Steinhauer

The neighbourhood is named for Henry Bird Steinhauer, a missionary who settled in Alberta during the mid-1800s (and from whom the family of the former Lieutenant Governor takes its name).

What we see in Steinhauer

In Steinhauer the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Priming and painting afterwards

New compound drinks paint

A freshly skimmed Steinhauer ceiling is porous and takes paint unevenly without a primer-sealer. Skipping it produces a patchy sheen that shows under the lights.

Who does it

We can prime and paint or hand it over paint-ready. Either is fine — what is not fine is a finish coat straight onto raw compound, and we will say so if that is the plan.

How long a Steinhauer ceiling actually takes

Coats need drying time

Scraping is a day. The taping repairs, skim coats and sanding that follow are spread over several days because each coat has to dry.

Why we do not compress it

Forcing coats produces shrinkage cracks that show up a month later. We give you the real schedule rather than the one that sounds better at the quote.

Asbestos in older Steinhauer ceiling texture

Pre-1990 is the flag

Texture coat on ceilings in Steinhauer homes of that era can contain asbestos. Scraping it is exactly the activity that makes it airborne.

Test, do not guess

If the age is uncertain and the material unknown, it gets tested before anyone scrapes. Where it does contain asbestos, skimming over it without disturbance is often the safer and cheaper route than removal.

What the finished Steinhauer ceiling should look like

Judged under raking light

A flat ceiling is judged by shining a light along it, not by looking up from the middle of the room. Under that test you should see no joint shadows, no fastener dimples and no scrape marks.

We walk it with you

Before we call it done, we walk the ceiling with you under the room's own lighting. If something shows, it gets another pass — that is easier to say now than to argue about later.

Containment in an occupied Steinhauer home

The room becomes a work site

Scraping wet texture produces heavy debris; sanding a skim coat produces fine dust that travels. Both need the room sealed off, floors covered and the furnace return blocked.

What we tell you

Which days the room is out of use, and that despite containment some fine dust will find its way past. Promising a dust-free ceiling scrape is not something we will do.

How it works

Simple, clean, on schedule — Knockdown Ceiling Removal in Steinhauer Edmonton

Free quote

We come out to your Steinhauer Edmonton property, take a real look at the knockdown ceiling removal, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every knockdown ceiling removal quote in Steinhauer Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the knockdown ceiling removal in Steinhauer Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Steinhauer Edmonton home while we finish the knockdown ceiling removal to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished knockdown ceiling removal with us and you're happy with the result in Steinhauer Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the knockdown ceiling removal contractor Steinhauer Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your knockdown ceiling removal project in Steinhauer Edmonton.

Read our reviews on Google

FAQ — Knockdown Ceiling Removal Steinhauer Edmonton

Knockdown Ceiling Removal Steinhauer Edmonton: your questions answered

Can I stay in the house?: Yes, with containment. The room itself is out of use while it is worked, and despite sealing, some fine dust will find its way past. We will not promise a dust-free ceiling scrape.
Do I need to worry about asbestos?: If the Steinhauer home is pre-1990 and the material is unknown, it gets tested before anyone scrapes — scraping is exactly what makes it airborne. Where it is present, skimming over without disturbance is often safer and cheaper than removal.
My ceiling has been painted. Does that change things?: Yes, significantly. Paint seals the texture so it no longer wets out, and dry scraping damages the board underneath. Skimming over it in thin coats is the honest route and usually less disruptive.
Should the texture be scraped off or skimmed over?: It depends on whether it releases. We wet and scrape a test patch in Steinhauer first: if it softens cleanly, scraping gives the flattest result; if it has been painted it will not soften, and scraping tears the board face. Then skimming is the better ceiling.
Can you fix cracks while the texture is off in my Steinhauer home?: Yes — with the knockdown off in Steinhauer, cracks, nail pops and stains are repaired before the skim, so the finished ceiling is clean and sound.
Is it better to scrape the knockdown or skim over it?: It depends what is underneath. If the texture releases cleanly and the board and tape below are sound, scraping gives the flattest result. If the texture is painted hard or the tape is failing, skimming over it is faster, cleaner and often the better ceiling. We test a patch in Steinhauer before quoting.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Knockdown Ceiling Removal Steinhauer Edmonton

Textured ceilings in Steinhauer, scraped or skimmed to smooth