What will you find under the texture?

Often rough taping — knockdown was frequently applied to hide it. Until it is off nobody knows how much repair is needed, so we tell you what the test patch suggests and what would push it rather than quoting one number and revising.

Why does it take several days?

The coats have to dry. Scraping is a day; the taping repairs, skim coats and sanding are spread out because forcing them produces shrinkage cracks a month later. We give you the real schedule.

How much dust does knockdown removal make?

A lot, which is why containment matters more than speed. We seal the room, cover floors and run sanding to a vacuum where the job allows. The honest expectation is that the room is out of use while the ceiling is worked, not that it stays clean.

Will the pot lights and vents still line up afterwards?

Yes. Fixtures, vents and the wall junction are the details that make a re-finished ceiling look original, so they are cut in and detailed rather than skimmed around. It is the part that separates a flat ceiling from a finished one.

Should the texture be scraped off or skimmed over?

It depends on whether it releases. We wet and scrape a test patch in Secord first: if it softens cleanly, scraping gives the flattest result; if it has been painted it will not soften, and scraping tears the board face. Then skimming is the better ceiling.

Is it better to scrape the knockdown or skim over it?

It depends what is underneath. If the texture releases cleanly and the board and tape below are sound, scraping gives the flattest result. If the texture is painted hard or the tape is failing, skimming over it is faster, cleaner and often the better ceiling. We test a patch in Secord before quoting.

Knockdown Ceiling Removal Secord Edmonton | Texture Scraping

Textured ceilings in Secord, scraped or skimmed to smooth

Knockdown and splatter ceilings date an Secord room and catch dust and cobwebs in every ridge. In Secord we remove dated knockdown texture and refinish the ceiling — either skimmed dead-flat to a smooth modern look or re-textured cleanly. Secord is one of West Henday's newer communities, where fresh installation and first-year settling work are common, so the knockdown work here is usually refresh and resurfacing before a repaint. We cover Secord, Breckenridge Greens, Edgemont, Glastonbury and West Henday, 7 days a week.

Clean re-texture for Secord ceilings if you prefer a new finish
We fix cracks and staining on Secord ceilings during the removal window
Secord re-texturing available for those who want a fresh finish
Left primed-ready for paint
New-finish re-texture as an option on Secord ceilings
Skim to flat Level 4 or Level 5 on Secord ceilings
Flat Level 4 or Level 5 skim finish for Secord homes

What affects the cost of knockdown ceiling removal in Secord in Edmonton?

Area, finish and condition

The cost in Secord depends on the ceiling area, the finish you want (a dead-flat Level 5 takes more skim work than a re-texture), and the condition underneath — cracks or stains found once the texture is off add a little time. We assess on site and price it before we start.

Skim flat vs re-texture in Secord

Most homeowners here go flat for a modern look, but we also re-texture cleanly if you prefer. We tell you what each option involves so you can choose for your Secord ceiling.

Secord drywall in context

About Secord

Secord is a neighbourhood in west Edmonton, Alberta, Canada that was established in 2007 through the adoption of the Secord Neighbourhood Structure Plan (NSP).

What we see in Secord

In Secord the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We confirm what your home actually needs on site, in writing, before anything starts.

Why Secord homeowners trust Emplastrum for knockdown removal

A clean flat finish, finished to the light

The skim after the scrape is where a ceiling is made or ruined, and finishing is our specialty — a flat ceiling in Secord is finished to the raking light your paint will see.

Fixed price, same-day reply

We remove knockdown ceilings across Secord and West Henday, 7 days a week. Free on-site Secord quotes and fixed prices — the number comes first, dust is controlled, cleanup included, and the work is guaranteed. If anything is off on an Secord ceiling, we return and put it right.

Painted texture is a different animal

Paint seals it

An Secord knockdown ceiling that has been painted will not wet out. Scraping it dry damages the board underneath and creates far more repair than the texture was worth.

The honest route

Skimming over it. Two or three thin coats bring the surface to flat without disturbing the board, and the finished ceiling is indistinguishable from a scraped one. It is usually less disruptive as well.

How long a Secord ceiling actually takes

Coats need drying time

Scraping is a day. The taping repairs, skim coats and sanding that follow are spread over several days because each coat has to dry.

Why we do not compress it

Forcing coats produces shrinkage cracks that show up a month later. We give you the real schedule rather than the one that sounds better at the quote.

Asbestos in older Secord ceiling texture

Pre-1990 is the flag

Texture coat on ceilings in Secord homes of that era can contain asbestos. Scraping it is exactly the activity that makes it airborne.

Test, do not guess

If the age is uncertain and the material unknown, it gets tested before anyone scrapes. Where it does contain asbestos, skimming over it without disturbance is often the safer and cheaper route than removal.

Doing one room or the whole floor

The transition problem

Flattening one Secord ceiling and leaving the adjoining room textured leaves a visible line at the doorway.

How to handle it

Either carry the flat finish to a natural break, or accept the transition where a door casing hides it. We will point out where the natural stopping points are so the decision is made deliberately rather than discovered.

How it works

Simple, clean, on schedule — Knockdown Ceiling Removal in Secord Edmonton

Free quote

We come out to your Secord Edmonton property, take a real look at the knockdown ceiling removal, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every knockdown ceiling removal quote in Secord Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the knockdown ceiling removal in Secord Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Secord Edmonton home while we finish the knockdown ceiling removal to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished knockdown ceiling removal with us and you're happy with the result in Secord Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the knockdown ceiling removal contractor Secord Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your knockdown ceiling removal project in Secord Edmonton.

Read our reviews on Google

FAQ — Knockdown Ceiling Removal Secord Edmonton

Knockdown Ceiling Removal Secord Edmonton: your questions answered

What will you find under the texture?: Often rough taping — knockdown was frequently applied to hide it. Until it is off nobody knows how much repair is needed, so we tell you what the test patch suggests and what would push it rather than quoting one number and revising.
Why does it take several days?: The coats have to dry. Scraping is a day; the taping repairs, skim coats and sanding are spread out because forcing them produces shrinkage cracks a month later. We give you the real schedule.
How much dust does knockdown removal make?: A lot, which is why containment matters more than speed. We seal the room, cover floors and run sanding to a vacuum where the job allows. The honest expectation is that the room is out of use while the ceiling is worked, not that it stays clean.
Will the pot lights and vents still line up afterwards?: Yes. Fixtures, vents and the wall junction are the details that make a re-finished ceiling look original, so they are cut in and detailed rather than skimmed around. It is the part that separates a flat ceiling from a finished one.
Should the texture be scraped off or skimmed over?: It depends on whether it releases. We wet and scrape a test patch in Secord first: if it softens cleanly, scraping gives the flattest result; if it has been painted it will not soften, and scraping tears the board face. Then skimming is the better ceiling.
Is it better to scrape the knockdown or skim over it?: It depends what is underneath. If the texture releases cleanly and the board and tape below are sound, scraping gives the flattest result. If the texture is painted hard or the tape is failing, skimming over it is faster, cleaner and often the better ceiling. We test a patch in Secord before quoting.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Knockdown Ceiling Removal Secord Edmonton

Textured ceilings in Secord, scraped or skimmed to smooth