Why does it take several days?

The coats have to dry. Scraping is a day; the taping repairs, skim coats and sanding are spread out because forcing them produces shrinkage cracks a month later. We give you the real schedule.

Do you remove knockdown ceilings in Fraser?

Yes — Fraser is part of our regular service area and we are usually booked within the week. We also cover Balwin, Bannerman, Belmont and Northeast.

Can you remove knockdown from a ceiling that has already been painted?

Usually by skimming rather than scraping. Paint seals the texture so it no longer softens and releases, and scraping a painted ceiling tends to tear the paper face off the board. Skimming over it avoids that damage.

My ceiling has been painted. Does that change things?

Yes, significantly. Paint seals the texture so it no longer wets out, and dry scraping damages the board underneath. Skimming over it in thin coats is the honest route and usually less disruptive.

Can you make the ceiling completely flat?

Yes — after removing the texture in Fraser we skim to a flat Level 4 or Level 5, ready for paint. Or we apply a clean new texture on your Fraser ceiling if you prefer.

Can you fix cracks while the texture is off in my Fraser home?

Yes — with the knockdown off in Fraser, cracks, nail pops and stains are repaired before the skim, so the finished ceiling is clean and sound.

Knockdown Ceiling Removal Fraser Edmonton | Texture Scraping

Knockdown ceiling removal in Fraser for a clean modern ceiling

In Fraser, a knockdown or splatter ceiling ages the room and collects dust and cobwebs ridge by ridge. In Fraser we remove dated knockdown texture and refinish the ceiling — either skimmed dead-flat to a smooth modern look or re-textured cleanly. Fraser is an Northeast community with a mix of older homes and newer builds, so the knockdown work here is usually refresh and resurfacing before a repaint. We cover Fraser, Balwin, Bannerman, Belmont and Northeast, 7 days a week.

Fraser ceiling cracks and stains handled while the board is bare
We fix cracks and staining on Fraser ceilings during the removal window
New-finish re-texture as an option on Fraser ceilings
Skim to flat Level 4 or Level 5 on Fraser ceilings
Full dust control and floor protection
Left primed-ready for paint
Fraser ceilings skimmed to a flat Level 4 or Level 5

The wall junction

The line your eye follows

Where an Fraser ceiling meets the wall is the most visible line in the room, and it is where a scraped ceiling most often looks unfinished.

Detailing it

The junction is cut in cleanly and the skim carried right into the corner rather than feathered out short. Where crown moulding is going back on it matters less; where it is not, this line is the job.

Fraser drywall in context

About Fraser

Named for John Fraser, an original homesteader in the area and one of the first trustees of the Belmont School, Fraser is located in the City's far northwest.

What we see in Fraser

In Fraser the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Skim coating over texture, step by step

Not one thick coat

Burying an Fraser texture in a single heavy pass cracks and shrinks. It goes on in thin coats, each allowed to dry, each sanded lightly.

How many

Usually two or three depending on how aggressive the original texture was. A deep knockdown needs more than a light orange peel, and we say which yours is after the test patch.

Priming and painting afterwards

New compound drinks paint

A freshly skimmed Fraser ceiling is porous and takes paint unevenly without a primer-sealer. Skipping it produces a patchy sheen that shows under the lights.

Who does it

We can prime and paint or hand it over paint-ready. Either is fine — what is not fine is a finish coat straight onto raw compound, and we will say so if that is the plan.

Skim flat or re-texture? What suits your Fraser ceiling

Flat, modern ceilings

A dead-flat ceiling is the current look and the one most Fraser homeowners choose when they remove knockdown — it makes a room feel larger and cleaner.

A fresh, consistent texture

If you prefer texture, we can apply a clean knockdown or a lighter finish that is even across the whole ceiling, rather than the dated, heavy splatter that is there now. Both come up here.

Containment in an occupied Fraser home

The room becomes a work site

Scraping wet texture produces heavy debris; sanding a skim coat produces fine dust that travels. Both need the room sealed off, floors covered and the furnace return blocked.

What we tell you

Which days the room is out of use, and that despite containment some fine dust will find its way past. Promising a dust-free ceiling scrape is not something we will do.

How long a Fraser ceiling actually takes

Coats need drying time

Scraping is a day. The taping repairs, skim coats and sanding that follow are spread over several days because each coat has to dry.

Why we do not compress it

Forcing coats produces shrinkage cracks that show up a month later. We give you the real schedule rather than the one that sounds better at the quote.

How it works

Simple, clean, on schedule — Knockdown Ceiling Removal in Fraser Edmonton

Free quote

We come out to your Fraser Edmonton property, take a real look at the knockdown ceiling removal, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every knockdown ceiling removal quote in Fraser Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the knockdown ceiling removal in Fraser Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Fraser Edmonton home while we finish the knockdown ceiling removal to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished knockdown ceiling removal with us and you're happy with the result in Fraser Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the knockdown ceiling removal contractor Fraser Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your knockdown ceiling removal project in Fraser Edmonton.

Read our reviews on Google

FAQ — Knockdown Ceiling Removal Fraser Edmonton

Knockdown Ceiling Removal Fraser Edmonton: your questions answered

Why does it take several days?: The coats have to dry. Scraping is a day; the taping repairs, skim coats and sanding are spread out because forcing them produces shrinkage cracks a month later. We give you the real schedule.
Do you remove knockdown ceilings in Fraser?: Yes — Fraser is part of our regular service area and we are usually booked within the week. We also cover Balwin, Bannerman, Belmont and Northeast.
Can you remove knockdown from a ceiling that has already been painted?: Usually by skimming rather than scraping. Paint seals the texture so it no longer softens and releases, and scraping a painted ceiling tends to tear the paper face off the board. Skimming over it avoids that damage.
My ceiling has been painted. Does that change things?: Yes, significantly. Paint seals the texture so it no longer wets out, and dry scraping damages the board underneath. Skimming over it in thin coats is the honest route and usually less disruptive.
Can you make the ceiling completely flat?: Yes — after removing the texture in Fraser we skim to a flat Level 4 or Level 5, ready for paint. Or we apply a clean new texture on your Fraser ceiling if you prefer.
Can you fix cracks while the texture is off in my Fraser home?: Yes — with the knockdown off in Fraser, cracks, nail pops and stains are repaired before the skim, so the finished ceiling is clean and sound.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Knockdown Ceiling Removal Fraser Edmonton

Knockdown ceiling removal in Fraser for a clean modern ceiling