Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Garage boarding and fire separations in Northmount

A finished Northmount garage is cleaner, warmer and worth more — but the wall and ceiling shared with the house must be fire-rated to code. In Northmount we hang, tape and finish garage walls and ceilings, with Type X fire-rated board on the Northmount house-side separation. Northmount is an Northwest community with a mix of older homes and newer builds, so garage finishing here is common. We cover Northmount, Albany, Athlone, Baranow and Northwest, 7 days a week.

Garage Drywall Northmount Edmonton

Watch garage drywall jobs in Northmount Edmonton on our YouTube channel

Finish level for a garage

Being realistic

A garage is lit harshly, viewed at close range along the walls, and rarely worth a top-level finish.

What we recommend

A sound taped finish, primed, in a durable washable coating. Spending on a display-level finish in a room that will meet a bumper and a bike rack is not where we would put a client's money, and we say so.

Northmount drywall in context

About Northmount

Residential land accounts for almost 70 percent of Northmount.

What we see in Northmount

In Northmount the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Boarding a Northmount garage ceiling with storage above

Loads and access

Plenty of Northmount garages carry storage in the trusses above the ceiling. That changes things: access hatches have to be framed and finished, and any rated ceiling has to stay rated where the hatch goes through it.

What we flag

We flag where a hatch will interrupt a rated assembly and how it needs to be detailed, and we point out where storage loads are bearing on framing that was not intended to carry them. That is a conversation to have before the ceiling closes, not after.

Moisture from vehicles

Snow melts off a car

A vehicle brings in a surprising volume of snow and road salt, and it evaporates into an enclosed Northmount garage.

What we specify

Moisture-resistant board where splash and standing water are likely, holding the board off the slab so it never wicks, and making sure the space can actually vent that moisture rather than condensing it on the ceiling.

Why a Northmount garage is harder on drywall than a house

The temperature cycle

An unheated Northmount garage can swing tens of degrees in a day and cross freezing repeatedly through the winter. Board, framing and joint compound all move at different rates through that cycle, and the joints are where the difference shows.

What we do about it

Joints are taped and coated in thin passes and given time between coats rather than rushed, and the assembly is detailed so movement is taken at the joint instead of cracking the face. It is the same principle as any interior job, applied to a much harder environment.

Finishing around the vehicle door and the man door

The details that get skipped

The header over a Northmount overhead door, the reveal around the man door and the junction where the garage wall meets the house are the spots most often left rough, because they are awkward and out of eye line.

Why they matter

They are also where the rated separation is most often broken and where air leakage is worst. We detail them properly, both for the assembly and because those edges are what you actually see when the overhead door is open.

What finish level a Northmount garage actually needs

Level 5 is rarely the answer

A garage is usually lit by a couple of fixtures, not raking window light, and it is a working space. Paying for a full skim coat on a Northmount garage seldom shows a return.

Where to spend instead

A sound taping job, a level of finish appropriate to the lighting, and a good primer and paint will look better in five years than a high finish level over a rushed tape. We will say plainly where a higher level is worth it and where it is not.

Simple, clean, on schedule — Garage Drywall in Northmount Edmonton

1

Free quote

We come out to your Northmount Edmonton property, take a real look at the garage drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every garage drywall quote in Northmount Edmonton starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the garage drywall in Northmount Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your Northmount Edmonton home while we finish the garage drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished garage drywall with us and you're happy with the result in Northmount Edmonton. If anything needs a second look, we handle it before we call the job done.

Rated by Edmonton Homeowners

Emplastrum Drywall is the garage drywall contractor Northmount Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your garage drywall project in Northmount Edmonton.

Read our reviews on Google

Garage Drywall Northmount Edmonton: your questions answered

Can you do the insulation and vapour barrier as well as the boarding?
Yes, and we would rather do both so the sequence is right. Boarding over an incomplete or damaged vapour barrier hides a problem that surfaces later as staining, and it costs far more to fix through a finished wall.
Can you board my Northmount garage only and let me paint?
Yes — we can board your Northmount garage (with the required fire-rated separation) and leave the finishing and paint to you, or finish it fully.
The board is up in my garage but the joints are open. Is that finished?
Not if it is a rated separation. Untaped joints mean the assembly is incomplete even though the board looks installed. It is the most common thing we find in existing Northmount garages, and often the fix is finishing the joints rather than replacing the ceiling.
Board-only with me painting — possible in Northmount?
Yes — we can board your Northmount garage (with the required fire-rated separation) and leave the finishing and paint to you, or finish it fully.
Do you do garage drywall in Northmount in Edmonton?
Yes — garage drywall in Northmount is part of our regular work, and we are usually booked within the week. We also cover Albany, Athlone, Baranow and Northwest.
Should I use moisture-resistant board in my garage?
It is worth it low on the walls where a vehicle brings snow in all winter. It is usually not worth upgrading the whole garage. Impact-resistant board on the two walls that actually get hit is normally the better spend.

Need Edmonton’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Edmonton →
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook