Does it need sealing as well as boarding?

Yes. The same separation keeps exhaust fumes and stored-chemical vapour out of the house. Leaks around the man door, ceiling junction and penetrations are cheap to seal while open and awkward afterwards.

Will drywall crack in an unheated Maple Ridge garage?

It can, because the space cycles across freezing repeatedly and the materials move at different rates. Thin coats with proper drying time between them, and detailing that lets movement happen at the joint, is what keeps it sound.

What finish level should a Maple Ridge garage be?

Usually a sound standard finish rather than a skim coat. A garage is lit by a couple of fixtures and used as a working space, so a full Level 5 rarely shows a return. We would rather spend it on better board where things get knocked.

Do you stand behind your garage drywall in Maple Ridge?

Yes. In Maple Ridge the firewall is built to code and the finish left clean — with a comeback promise if anything is not right.

Can you do the insulation and vapour barrier as well as the boarding?

Yes, and we would rather do both so the sequence is right. Boarding over an incomplete or damaged vapour barrier hides a problem that surfaces later as staining, and it costs far more to fix through a finished wall.

Will the joints crack in an unheated garage?

It moves more than a heated room, going from well below freezing to warm in an afternoon. We fasten and tape to allow that, and we tell you honestly to expect more joint movement over years than indoors.

Garage Drywall Maple Ridge Edmonton | Garage Board

Finishing a Maple Ridge garage so the joints survive winter

Cleaner, warmer, more valuable — the finished Maple Ridge garage — as long as the house-adjoining surfaces are fire-rated to code. In Maple Ridge we hang, tape and finish garage walls and ceilings, with The Maple Ridge separation wall and ceiling: Type X fire-rated. Maple Ridge is an established south Edmonton community of 1960s-70s homes where ceiling stipple, settling cracks and dated texture are common, so garage finishing here is common. We cover Maple Ridge, Avonmore, Bonnie Doon, Capilano and Southeast, 7 days a week.

Fire separation between garage and living space
Your Maple Ridge garage: fully finished, or boarded and ready for your paint
Maple Ridge coverage — we come to you
Heated and finished garage drywall
Type X fire-rated board on the Maple Ridge house-side separation
Inspection-ready fire separation
Impact-resistant board where vehicles and tools are close

The wall to the house is the important one

Not just another wall

The common wall and ceiling between an attached Maple Ridge garage and the living space is a separation, and it is specified rather than optional.

What that changes

Board type, fastening, and how every penetration through it is treated. The other three walls of the garage are finish work; this one is the reason the job is inspected.

Finished and heated garages in Maple Ridge

A clean, usable space

A finished garage in Maple Ridge is warmer, cleaner and more usable as a workshop or storage — we board and finish the walls and ceiling so it is ready for paint.

The code-required firewall

Whatever the finish, the house-side separation is Type X fire-rated to code. Most Maple Ridge garage projects run into this. See our fire-rated drywall page.

Moisture from vehicles

Snow melts off a car

A vehicle brings in a surprising volume of snow and road salt, and it evaporates into an enclosed Maple Ridge garage.

What we specify

Moisture-resistant board where splash and standing water are likely, holding the board off the slab so it never wicks, and making sure the space can actually vent that moisture rather than condensing it on the ceiling.

Choosing board for a working Maple Ridge garage

Standard, moisture-resistant or impact-resistant

Most Maple Ridge garage walls are fine in standard board. Where the space is regularly damp — a vehicle bringing in snow all winter — moisture-resistant board is worth it low on the walls. Where bikes, tools and vehicle doors make contact, impact-resistant board takes the abuse far better.

Spending it where it matters

We would rather put the better board on the two walls that actually get hit than upgrade the whole garage. We will tell you which walls those are once we see how the space is used.

What affects the cost of garage drywall in Maple Ridge in Edmonton?

Size, finish and fire rating

The cost in Maple Ridge depends on the garage size, the finish level, and the fire-rated separation on the house-side wall and ceiling. The gap between boarded and fully finished shows in every Maple Ridge garage. We price off the garage and a site look.

The firewall in Maple Ridge

Finished garages are common, and the house-side separation must be Type X to code. We install it correctly so your Maple Ridge garage passes inspection.

Shelving, lifts and anchoring into the wall

Plan it before boarding

Cabinets, overhead racks and heavy shelving all need something solid behind the board.

The cheap step

Blocking installed while the Maple Ridge garage framing is open, and a photograph of where it is. Adding a heavy rack later to a boarded wall means guessing at studs or opening the wall, and on a rated wall that is a bigger problem than on a plain one.

How it works

Simple, clean, on schedule — Garage Drywall in Maple Ridge Edmonton

Free quote

We come out to your Maple Ridge Edmonton property, take a real look at the garage drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every garage drywall quote in Maple Ridge Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the garage drywall in Maple Ridge Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Maple Ridge Edmonton home while we finish the garage drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished garage drywall with us and you're happy with the result in Maple Ridge Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the garage drywall contractor Maple Ridge Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your garage drywall project in Maple Ridge Edmonton.

Read our reviews on Google

FAQ — Garage Drywall Maple Ridge Edmonton

Garage Drywall Maple Ridge Edmonton: your questions answered

Does it need sealing as well as boarding?: Yes. The same separation keeps exhaust fumes and stored-chemical vapour out of the house. Leaks around the man door, ceiling junction and penetrations are cheap to seal while open and awkward afterwards.
Will drywall crack in an unheated Maple Ridge garage?: It can, because the space cycles across freezing repeatedly and the materials move at different rates. Thin coats with proper drying time between them, and detailing that lets movement happen at the joint, is what keeps it sound.
What finish level should a Maple Ridge garage be?: Usually a sound standard finish rather than a skim coat. A garage is lit by a couple of fixtures and used as a working space, so a full Level 5 rarely shows a return. We would rather spend it on better board where things get knocked.
Do you stand behind your garage drywall in Maple Ridge in Edmonton?: Yes. In Maple Ridge the firewall is built to code and the finish left clean — with a comeback promise if anything is not right.
Can you do the insulation and vapour barrier as well as the boarding?: Yes, and we would rather do both so the sequence is right. Boarding over an incomplete or damaged vapour barrier hides a problem that surfaces later as staining, and it costs far more to fix through a finished wall.
Will the joints crack in an unheated garage?: It moves more than a heated room, going from well below freezing to warm in an afternoon. We fasten and tape to allow that, and we tell you honestly to expect more joint movement over years than indoors.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Garage Drywall Maple Ridge Edmonton

Finishing a Maple Ridge garage so the joints survive winter