Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Garage boarding and fire separations in Fulton Place

Cleaner, warmer, more valuable — the finished Fulton Place garage — as long as the house-adjoining surfaces are fire-rated to code. In Fulton Place we hang, tape and finish garage walls and ceilings, with The Fulton Place separation wall and ceiling: Type X fire-rated. Fulton Place is this established Southeast community where reno, repair and ceiling drywall are common, so garage finishing here is common. We cover Fulton Place, Avonmore, Bonnie Doon, Capilano and Southeast, 7 days a week.

Garage Drywall Fulton Place Edmonton

Watch garage drywall jobs in Fulton Place Edmonton on our YouTube channel

The wall to the house is the important one

Not just another wall

The common wall and ceiling between an attached Fulton Place garage and the living space is a separation, and it is specified rather than optional.

What that changes

Board type, fastening, and how every penetration through it is treated. The other three walls of the garage are finish work; this one is the reason the job is inspected.

Fulton Place drywall in context

About Fulton Place

Named for the creek which runs through the ravine on its west boundary, Fulton Place lies east of the downtown core and developed in the 1950s.

What we see in Fulton Place

In Fulton Place the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Temperature swings and what they do to joints

An unheated Fulton Place garage moves

The building goes from well below freezing to warm in a day when the door opens on a sunny afternoon, and the framing moves with it.

How we detail for it

Board fastened to allow that movement, joints taped rather than filled, and honest expectations that an unheated garage will show more joint movement over years than a heated room will.

Insulating a garage that is not heated

Worth thinking about

Insulating an unheated Fulton Place garage still moderates the swing and takes the edge off, but it changes how moisture behaves inside the space.

The honest version

If it is insulated and boarded but never heated or vented, moisture that gets in has fewer ways out. We would rather talk through the whole plan for the space than board an assembly that will not suit how it is used.

Sealing the garage from the house

Air as well as fire

The same separation is what keeps exhaust fumes and stored-chemical vapour out of the Fulton Place house.

Where it leaks

Around the man door, at the ceiling-to-wall junction, at pipe and wire penetrations, and above a dropped soffit. Sealing those is cheap while the wall is open and awkward afterwards, so it happens before boarding.

Why a Fulton Place garage is harder on drywall than a house

The temperature cycle

An unheated Fulton Place garage can swing tens of degrees in a day and cross freezing repeatedly through the winter. Board, framing and joint compound all move at different rates through that cycle, and the joints are where the difference shows.

What we do about it

Joints are taped and coated in thin passes and given time between coats rather than rushed, and the assembly is detailed so movement is taken at the joint instead of cracking the face. It is the same principle as any interior job, applied to a much harder environment.

Finishing around the vehicle door and the man door

The details that get skipped

The header over a Fulton Place overhead door, the reveal around the man door and the junction where the garage wall meets the house are the spots most often left rough, because they are awkward and out of eye line.

Why they matter

They are also where the rated separation is most often broken and where air leakage is worst. We detail them properly, both for the assembly and because those edges are what you actually see when the overhead door is open.

Simple, clean, on schedule — Garage Drywall in Fulton Place Edmonton

1

Free quote

We come out to your Fulton Place Edmonton property, take a real look at the garage drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every garage drywall quote in Fulton Place Edmonton starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the garage drywall in Fulton Place Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your Fulton Place Edmonton home while we finish the garage drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished garage drywall with us and you're happy with the result in Fulton Place Edmonton. If anything needs a second look, we handle it before we call the job done.

Rated by Edmonton Homeowners

Emplastrum Drywall is the garage drywall contractor Fulton Place Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your garage drywall project in Fulton Place Edmonton.

Read our reviews on Google

Garage Drywall Fulton Place Edmonton: your questions answered

The board is up in my garage but the joints are open. Is that finished?
Not if it is a rated separation. Untaped joints mean the assembly is incomplete even though the board looks installed. It is the most common thing we find in existing Fulton Place garages, and often the fix is finishing the joints rather than replacing the ceiling.
Do you do garage drywall in Fulton Place in Edmonton?
Yes — garage drywall in Fulton Place is part of our regular work, and we are usually booked within the week. We also cover Avonmore, Bonnie Doon, Capilano and Southeast.
Do you stand behind your garage drywall in Fulton Place in Edmonton?
Yes. In Fulton Place the firewall is built to code and the finish left clean — with a comeback promise if anything is not right.
Board-only with me painting — possible in Fulton Place?
Yes — we can board your Fulton Place garage (with the required fire-rated separation) and leave the finishing and paint to you, or finish it fully.
Can you do the insulation and vapour barrier as well as the boarding?
Yes, and we would rather do both so the sequence is right. Boarding over an incomplete or damaged vapour barrier hides a problem that surfaces later as staining, and it costs far more to fix through a finished wall.
Can you finish a heated garage?
Yes — Fulton Place garages leave us paint-ready — boarded, taped, finished — with the required fire separation in place.

Need Edmonton’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Edmonton →
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook