Can you do the insulation and vapour barrier as well as the boarding?

Yes, and we would rather do both so the sequence is right. Boarding over an incomplete or damaged vapour barrier hides a problem that surfaces later as staining, and it costs far more to fix through a finished wall.

Does my Chambery garage need fire-rated drywall?

The house-adjoining Chambery wall and ceiling do — code mandates Type X fire-rated board there. We install it correctly so your Chambery garage passes inspection.

The board is up in my garage but the joints are open. Is that finished?

Not if it is a rated separation. Untaped joints mean the assembly is incomplete even though the board looks installed. It is the most common thing we find in existing Chambery garages, and often the fix is finishing the joints rather than replacing the ceiling.

Is the garage wall different from the rest of the house?

The wall and ceiling shared with the living space is a separation with specified board, fastening and penetration treatment. The other three walls are finish work; the shared one is why the job is inspected.

Can you board my Chambery garage only and let me paint?

Yes — we can board your Chambery garage (with the required fire-rated separation) and leave the finishing and paint to you, or finish it fully.

Is a board-only Chambery garage job an option if I finish it?

Yes — we can board your Chambery garage (with the required fire-rated separation) and leave the finishing and paint to you, or finish it fully.

Garage Drywall Chambery Edmonton | Garage Board

Finishing a Chambery garage so the joints survive winter

Two things separate garage work in Chambery from ordinary interior drywall: the fire separation where living space sits above or beside the garage, and the temperature cycling that pulls joints apart. We deal with both up front rather than discovering them at the finish stage.

Moisture-tolerant detailing where needed
Impact-resistant board where vehicles and tools are close
Type X fire-rated board on the Chambery house-side separation
Chambery coverage — we come to you
Fire separation between garage and living space
Type X board where the assembly calls for it
Inspection-ready fire separation

Sealing the garage from the house

Air as well as fire

The same separation is what keeps exhaust fumes and stored-chemical vapour out of the Chambery house.

Where it leaks

Around the man door, at the ceiling-to-wall junction, at pipe and wire penetrations, and above a dropped soffit. Sealing those is cheap while the wall is open and awkward afterwards, so it happens before boarding.

Chambery drywall in context

About Chambery

Chambery has been planned to incorporate a series of residential sub-units within the neighbourhood, as defined by the collector road system.

What we see in Chambery

In Chambery the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We confirm what your home actually needs on site, in writing, before anything starts.

The fire separation between garage and house

When it applies

Where a Chambery garage is attached, or living space sits above it, a rated separation is normally required between the two. That usually means Type X board on the shared wall and on the ceiling under living space, taped as part of the assembly.

The common gap

The most frequent thing we find in existing garages is board installed and joints left open. The board is there, so it looks finished — but an untaped rated assembly is not complete. Often the honest fix is finishing the joints rather than replacing the ceiling.

Our Chambery garage drywall process in Edmonton, step by step

Fire-rated separation first

In Chambery we board the house-side wall and ceiling with Type X fire-rated board, because that separation is a code requirement, not a finish option.

Board, tape and finish

We board the rest of the garage, tape and finish to the level you want — a clean paint-ready finish for a heated or finished garage, or boarded only if you are painting it yourself. Sealed right, the Chambery rated separation clears inspection.

Finish level for a garage

Being realistic

A garage is lit harshly, viewed at close range along the walls, and rarely worth a top-level finish.

What we recommend

A sound taped finish, primed, in a durable washable coating. Spending on a display-level finish in a room that will meet a bumper and a bike rack is not where we would put a client's money, and we say so.

Finishing around the vehicle door and the man door

The details that get skipped

The header over a Chambery overhead door, the reveal around the man door and the junction where the garage wall meets the house are the spots most often left rough, because they are awkward and out of eye line.

Why they matter

They are also where the rated separation is most often broken and where air leakage is worst. We detail them properly, both for the assembly and because those edges are what you actually see when the overhead door is open.

Insulating a garage that is not heated

Worth thinking about

Insulating an unheated Chambery garage still moderates the swing and takes the edge off, but it changes how moisture behaves inside the space.

The honest version

If it is insulated and boarded but never heated or vented, moisture that gets in has fewer ways out. We would rather talk through the whole plan for the space than board an assembly that will not suit how it is used.

How it works

Simple, clean, on schedule — Garage Drywall in Chambery Edmonton

Free quote

We come out to your Chambery Edmonton property, take a real look at the garage drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every garage drywall quote in Chambery Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the garage drywall in Chambery Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Chambery Edmonton home while we finish the garage drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished garage drywall with us and you're happy with the result in Chambery Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the garage drywall contractor Chambery Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your garage drywall project in Chambery Edmonton.

Read our reviews on Google

FAQ — Garage Drywall Chambery Edmonton

Garage Drywall Chambery Edmonton: your questions answered

Can you do the insulation and vapour barrier as well as the boarding?: Yes, and we would rather do both so the sequence is right. Boarding over an incomplete or damaged vapour barrier hides a problem that surfaces later as staining, and it costs far more to fix through a finished wall.
Does my Chambery garage need fire-rated drywall?: The house-adjoining Chambery wall and ceiling do — code mandates Type X fire-rated board there. We install it correctly so your Chambery garage passes inspection.
The board is up in my garage but the joints are open. Is that finished?: Not if it is a rated separation. Untaped joints mean the assembly is incomplete even though the board looks installed. It is the most common thing we find in existing Chambery garages, and often the fix is finishing the joints rather than replacing the ceiling.
Is the garage wall different from the rest of the house?: The wall and ceiling shared with the living space is a separation with specified board, fastening and penetration treatment. The other three walls are finish work; the shared one is why the job is inspected.
Can you board my Chambery garage only and let me paint?: Yes — we can board your Chambery garage (with the required fire-rated separation) and leave the finishing and paint to you, or finish it fully.
Is a board-only Chambery garage job an option if I finish it?: Yes — we can board your Chambery garage (with the required fire-rated separation) and leave the finishing and paint to you, or finish it fully.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Garage Drywall Chambery Edmonton

Finishing a Chambery garage so the joints survive winter