Is the garage wall different from the rest of the house?

The wall and ceiling shared with the living space is a separation with specified board, fastening and penetration treatment. The other three walls are finish work; the shared one is why the job is inspected.

What finish level should a garage get?

A sound taped finish, primed, in a durable washable coating. A display-level finish in a room that meets a bumper and a bike rack is not where we would put your money, and we will say so.

Board-only with me painting — possible in Bisset?

Yes — we can board your Bisset garage (with the required fire-rated separation) and leave the finishing and paint to you, or finish it fully.

Is a board-only Bisset garage job an option if I finish it?

Yes — we can board your Bisset garage (with the required fire-rated separation) and leave the finishing and paint to you, or finish it fully.

Does my Bisset garage need fire-rated drywall?

The house-adjoining Bisset wall and ceiling do — code mandates Type X fire-rated board there. We install it correctly so your Bisset garage passes inspection.

What board should go near the floor?

Moisture-resistant where splash and standing water are likely, held off the slab so it never wicks. Vehicles bring in a surprising volume of snow and road salt that evaporates into the space.

Garage Drywall Bisset Edmonton | Garage Board

Garage boarding and fire separations in Bisset

A garage is not a spare room, and finishing one like a bedroom is why so many Bisset garages develop cracked joints in the first year. The space swings from well below freezing to warm and back again, often with a vehicle bringing snow and moisture in, and the assembly has to be chosen for that.

Your Bisset garage: fully finished, or boarded and ready for your paint
Bisset house-side separations built in Type X fire-rated board
Finished complete or boarded-for-paint — both offered in Bisset
Insulation and vapour control before boarding
Type X fire-rated board on the Bisset house-side separation
Finish level matched to a working space, not a living room
Inspection-ready fire separation

Our Bisset garage drywall process in Edmonton, step by step

Fire-rated separation first

In Bisset we board the house-side wall and ceiling with Type X fire-rated board, because that separation is a code requirement, not a finish option.

Board, tape and finish

We board the rest of the garage, tape and finish to the level you want — a clean paint-ready finish for a heated or finished garage, or boarded only if you are painting it yourself. Sealed right, the Bisset rated separation clears inspection.

Bisset drywall in context

About Bisset

Bisset is named for Judge Athelstan Bisset, Q.C.

What we see in Bisset

In Bisset the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

What affects the cost of garage drywall in Bisset in Edmonton?

Size, finish and fire rating

The cost in Bisset depends on the garage size, the finish level, and the fire-rated separation on the house-side wall and ceiling. The gap between boarded and fully finished shows in every Bisset garage. We price off the garage and a site look.

The firewall in Bisset

Finished garages are common, and the house-side separation must be Type X to code. We install it correctly so your Bisset garage passes inspection.

Why Bisset homeowners trust Emplastrum for garage drywall in Edmonton

Code-right and finished clean

The garage firewall has to be right for safety and inspection, and the rest finished well for a usable space — in Bisset we do both.

Fixed price, same-day reply

We do garage drywall across Bisset and Mill Woods and Meadows, 7 days a week. Fixed pricing on free Bisset quotes, a clean site and a guarantee on the work. When an Bisset job is not right, we make it right — on us.

Sealing the garage from the house

Air as well as fire

The same separation is what keeps exhaust fumes and stored-chemical vapour out of the Bisset house.

Where it leaks

Around the man door, at the ceiling-to-wall junction, at pipe and wire penetrations, and above a dropped soffit. Sealing those is cheap while the wall is open and awkward afterwards, so it happens before boarding.

Temperature swings and what they do to joints

An unheated Bisset garage moves

The building goes from well below freezing to warm in a day when the door opens on a sunny afternoon, and the framing moves with it.

How we detail for it

Board fastened to allow that movement, joints taped rather than filled, and honest expectations that an unheated garage will show more joint movement over years than a heated room will.

The fire separation between garage and house

When it applies

Where a Bisset garage is attached, or living space sits above it, a rated separation is normally required between the two. That usually means Type X board on the shared wall and on the ceiling under living space, taped as part of the assembly.

The common gap

The most frequent thing we find in existing garages is board installed and joints left open. The board is there, so it looks finished — but an untaped rated assembly is not complete. Often the honest fix is finishing the joints rather than replacing the ceiling.

How it works

Simple, clean, on schedule — Garage Drywall in Bisset Edmonton

Free quote

We come out to your Bisset Edmonton property, take a real look at the garage drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every garage drywall quote in Bisset Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the garage drywall in Bisset Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Bisset Edmonton home while we finish the garage drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished garage drywall with us and you're happy with the result in Bisset Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the garage drywall contractor Bisset Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your garage drywall project in Bisset Edmonton.

Read our reviews on Google

FAQ — Garage Drywall Bisset Edmonton

Garage Drywall Bisset Edmonton: your questions answered

Is the garage wall different from the rest of the house?: The wall and ceiling shared with the living space is a separation with specified board, fastening and penetration treatment. The other three walls are finish work; the shared one is why the job is inspected.
What finish level should a garage get?: A sound taped finish, primed, in a durable washable coating. A display-level finish in a room that meets a bumper and a bike rack is not where we would put your money, and we will say so.
Board-only with me painting — possible in Bisset?: Yes — we can board your Bisset garage (with the required fire-rated separation) and leave the finishing and paint to you, or finish it fully.
Is a board-only Bisset garage job an option if I finish it?: Yes — we can board your Bisset garage (with the required fire-rated separation) and leave the finishing and paint to you, or finish it fully.
Does my Bisset garage need fire-rated drywall?: The house-adjoining Bisset wall and ceiling do — code mandates Type X fire-rated board there. We install it correctly so your Bisset garage passes inspection.
What board should go near the floor?: Moisture-resistant where splash and standing water are likely, held off the slab so it never wicks. Vehicles bring in a surprising volume of snow and road salt that evaporates into the space.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Garage Drywall Bisset Edmonton

Garage boarding and fire separations in Bisset