Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Finishing a Aldergrove garage so the joints survive winter

Cleaner, warmer, more valuable — the finished Aldergrove garage — as long as the house-adjoining surfaces are fire-rated to code. In Aldergrove we hang, tape and finish garage walls and ceilings, with The Aldergrove separation wall and ceiling: Type X fire-rated. Aldergrove is an West Edmonton community with a mix of older homes and newer builds, so garage finishing here is common. We cover Aldergrove, Belmead, Callingwood North, Callingwood South and West Edmonton, 7 days a week.

Garage Drywall Aldergrove Edmonton

Watch garage drywall jobs in Aldergrove Edmonton on our YouTube channel

Choosing board for a working Aldergrove garage

Standard, moisture-resistant or impact-resistant

Most Aldergrove garage walls are fine in standard board. Where the space is regularly damp — a vehicle bringing in snow all winter — moisture-resistant board is worth it low on the walls. Where bikes, tools and vehicle doors make contact, impact-resistant board takes the abuse far better.

Spending it where it matters

We would rather put the better board on the two walls that actually get hit than upgrade the whole garage. We will tell you which walls those are once we see how the space is used.

Aldergrove drywall in context

About Aldergrove

Planned in the 1970s, this area's multi-family dwellings on smaller lots were designed to help preserve agricultural land and conserve energy.

What we see in Aldergrove

In Aldergrove the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Insulation and vapour control before the board

Get this wrong and the board pays

In a Aldergrove garage that is heated even occasionally, warm moist air meets cold surfaces. Without correct insulation and vapour control that moisture condenses inside the assembly, and the first symptom is usually stained or soft board near the ceiling.

Sequencing

Insulation and vapour control are inspected and complete before boarding starts. Boarding over an unfinished or damaged vapour barrier hides a problem that will surface later as staining or mould, and it costs far more to fix through a finished wall.

Sealing the garage from the house

Air as well as fire

The same separation is what keeps exhaust fumes and stored-chemical vapour out of the Aldergrove house.

Where it leaks

Around the man door, at the ceiling-to-wall junction, at pipe and wire penetrations, and above a dropped soffit. Sealing those is cheap while the wall is open and awkward afterwards, so it happens before boarding.

Finish level for a garage

Being realistic

A garage is lit harshly, viewed at close range along the walls, and rarely worth a top-level finish.

What we recommend

A sound taped finish, primed, in a durable washable coating. Spending on a display-level finish in a room that will meet a bumper and a bike rack is not where we would put a client's money, and we say so.

Temperature swings and what they do to joints

An unheated Aldergrove garage moves

The building goes from well below freezing to warm in a day when the door opens on a sunny afternoon, and the framing moves with it.

How we detail for it

Board fastened to allow that movement, joints taped rather than filled, and honest expectations that an unheated garage will show more joint movement over years than a heated room will.

Moisture from vehicles

Snow melts off a car

A vehicle brings in a surprising volume of snow and road salt, and it evaporates into an enclosed Aldergrove garage.

What we specify

Moisture-resistant board where splash and standing water are likely, holding the board off the slab so it never wicks, and making sure the space can actually vent that moisture rather than condensing it on the ceiling.

Simple, clean, on schedule — Garage Drywall in Aldergrove Edmonton

1

Free quote

We come out to your Aldergrove Edmonton property, take a real look at the garage drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every garage drywall quote in Aldergrove Edmonton starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the garage drywall in Aldergrove Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your Aldergrove Edmonton home while we finish the garage drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished garage drywall with us and you're happy with the result in Aldergrove Edmonton. If anything needs a second look, we handle it before we call the job done.

Rated by Edmonton Homeowners

Emplastrum Drywall is the garage drywall contractor Aldergrove Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your garage drywall project in Aldergrove Edmonton.

Read our reviews on Google

Garage Drywall Aldergrove Edmonton: your questions answered

What finish level should a Aldergrove garage be?
Usually a sound standard finish rather than a skim coat. A garage is lit by a couple of fixtures and used as a working space, so a full Level 5 rarely shows a return. We would rather spend it on better board where things get knocked.
What board should go near the floor?
Moisture-resistant where splash and standing water are likely, held off the slab so it never wicks. Vehicles bring in a surprising volume of snow and road salt that evaporates into the space.
Can you board my Aldergrove garage only and let me paint?
Yes — we can board your Aldergrove garage (with the required fire-rated separation) and leave the finishing and paint to you, or finish it fully.
Board-only with me painting — possible in Aldergrove?
Yes — we can board your Aldergrove garage (with the required fire-rated separation) and leave the finishing and paint to you, or finish it fully.
Can you do the insulation and vapour barrier as well as the boarding?
Yes, and we would rather do both so the sequence is right. Boarding over an incomplete or damaged vapour barrier hides a problem that surfaces later as staining, and it costs far more to fix through a finished wall.
Do you do garage drywall in Aldergrove in Edmonton?
Yes — garage drywall in Aldergrove is part of our regular work, and we are usually booked within the week. We also cover Belmead, Callingwood North, Callingwood South and West Edmonton.

Need Edmonton’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Edmonton →
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook