Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Framing in Allendale, Argyll, Belgravia, square and ready for drywall

Turning an unfinished basement or an open floor plan into real rooms starts with the frame. In Malmo Plains we build wood-frame basement development layouts and interior partition walls — squared, plumbed and spaced for the drywall going over them. We frame interior, non-load-bearing walls only; a licensed structural engineer handles anything load-bearing. Malmo Plains is an older Scona community where settling cracks, aging texture and the occasional plaster repair come up, so framing here often means reworking walls that have shifted or been altered over the decades, alongside basement development. The same crew that frames can board, tape and finish too, so there is no handoff between trades. We cover Malmo Plains, Allendale, Argyll, Belgravia and Scona, 7 days a week.

Framing Malmo Plains

Watch framing jobs in Malmo Plains on our YouTube channel

Our Malmo Plains framing process, step by step

Layout before lumber

We chalk the plate lines from the plan or your walk-through direction and confirm every wall location in your Malmo Plains space before anything is cut.

Square, plumb, spaced right

We frame the walls square and plumb with stud spacing matched to the board going over them — the frame stage is where a wavy wall gets built or avoided. See our basement drywall work in Malmo Plains for the stage that follows.

Malmo Plains drywall in context

About Malmo Plains

Most of the land within the present neighbourhood was at one time part of the University of Alberta research farm.

What we see in Malmo Plains

In Malmo Plains the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

What affects the cost of framing in Allendale, Argyll, Belgravia?

Wall length, layout and openings

Framing cost in Allendale, Argyll, Belgravia tracks the total wall length, the complexity of the layout, and the number of openings and bulkheads. We price off a site walk-through and give a fixed number before we start.

Typical framing work in Allendale, Argyll, Belgravia homes

Because Allendale, Argyll, Belgravia is an older Scona community where settling cracks, aging texture and the occasional plaster repair come up, framing here often means reworking walls that have shifted or been altered over the decades, alongside basement development.

Basement development framing in Malmo Plains

From open concrete to real rooms

A basement development layout is the most common framing job we do in Malmo Plains — bedrooms, a bathroom, a media room or a suite, framed to plan and ready for the trades that follow.

Interior and non-load-bearing only

We keep our framing to interior, non-load-bearing walls and bulkheads. Anything structural belongs with a licensed structural engineer — and we will tell you honestly when that is what your project needs.

Our Malmo Plains framing process, step by step

Layout before lumber

We chalk the plate lines from the plan or your walk-through direction and confirm every wall location in your Malmo Plains space before anything is cut.

Square, plumb, spaced right

We frame the walls square and plumb with stud spacing matched to the board going over them — the frame stage is where a wavy wall gets built or avoided. See our basement drywall work in Malmo Plains for the stage that follows.

Common framing situations in Allendale, Argyll, Belgravia

Basement layouts

An older Scona community where settling cracks, aging texture and the occasional plaster repair come up, so framing an unfinished basement into a usable layout is the call we hear most.

Partition changes

We also reframe and add partition walls in Allendale, Argyll, Belgravia homes when a layout changes — closing an opening, splitting a room, or adding a closet or storage wall.

What affects the cost of framing in Malmo Plains?

Wall length, layout and openings

Framing cost in Malmo Plains tracks the total wall length, the complexity of the layout, and the number of openings and bulkheads. We price off a site walk-through and give a fixed number before we start.

Typical framing work in Malmo Plains homes

Because Malmo Plains is a hamlet-and-acreage area just north of Edmonton where custom homes and outbuildings drive a mix of drywall installation and finishing calls, framing calls here range from clean basement layouts in the newer homes to alteration work in the older ones.

Simple, clean, on schedule — Framing in Malmo Plains

1

Free quote

We come out to your Malmo Plains property, take a real look at the framing, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every framing quote in Malmo Plains starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the framing in Malmo Plains. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your Malmo Plains home while we finish the framing to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished framing with us and you're happy with the result in Malmo Plains. If anything needs a second look, we handle it before we call the job done.

Rated by Edmonton Homeowners

Emplastrum Drywall is the framing contractor Malmo Plains trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your framing project in Malmo Plains.

Read our reviews on Google

Framing Malmo Plains: your questions answered

Can the same crew do the drywall after framing in Malmo Plains?
Yes — one crew frames, boards, tapes and finishes, so nothing gets lost in a handoff between trades.
Do you frame basement developments in Malmo Plains?
Yes — wood-frame basement layouts ready for drywall are our most common framing job. We also cover Allendale, Argyll, Belgravia and Scona.
Do you coordinate with my electrician and plumber?
Yes — we sequence the framing so your other trades can rough in cleanly before insulation and drywall.
Do you build bulkheads around ducting in Allendale, Argyll, Belgravia?
Yes — bulkheads and soffits to box in ductwork, plumbing and lighting are part of nearly every basement frame.
Can the same crew do the drywall after framing in Allendale, Argyll, Belgravia?
Yes — one crew frames, boards, tapes and finishes, so nothing gets lost in a handoff between trades.
Do you frame load-bearing walls?
No — we frame interior, non-load-bearing walls and bulkheads only. Anything structural needs a licensed structural engineer, and we will tell you when that is the case.
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook