Can you add backing for a TV mount and shelves?

Yes, and tell us before the wall closes. Adding backing while it is open takes minutes; finding it missing afterwards means opening the wall or relying on anchors that eventually pull out. We ask what is going on the walls first.

Can the same crew do the drywall after framing in Lendrum Place?

Yes — one crew frames, boards, tapes and finishes, so nothing gets lost in a handoff between trades.

Can the same crew do the drywall after framing in Lendrum Place?

Yes — one crew frames, boards, tapes and finishes, so nothing gets lost in a handoff between trades.

Do you frame basement developments in Lendrum Place?

Yes — wood-frame basement layouts ready for drywall are our most common framing job. We also cover Allendale, Argyll, Belgravia and Scona.

Do you build bulkheads around ducting in Lendrum Place?

Yes — bulkheads and soffits to box in ductwork, plumbing and lighting are part of nearly every basement frame.

Why does framing matter for the drywall finish?

Because the finish inherits the frame. A bowed stud or a wall out of plumb cannot be made flat with compound. Every problem left in the framing becomes a finishing problem and then a visible one.

Framing Lendrum Place Edmonton | Stud Walls

Framing in Lendrum Place, set out for the board that follows

Frame-to-finish: one crew frames, boards, tapes and finishes
Lendrum Place coverage — we come to you
Stud spacing matched to the drywall going over it
Bulkheads and soffits for ductwork and lighting
Wood-frame basement development layouts in Lendrum Place
Interior partition walls framed square and plumb
Wood-frame basement development layouts in Allendale, Argyll, Belgravia

Our Lendrum Place framing process in Edmonton, step by step

Layout before lumber

We chalk the plate lines from the plan or your walk-through direction and confirm every wall location in your Allendale, Argyll, Belgravia space before anything is cut.

Square, plumb, spaced right

We frame the walls square and plumb with stud spacing matched to the board going over them — the frame stage is where a wavy wall gets built or avoided. See our basement drywall work in Allendale, Argyll, Belgravia for the stage that follows.

Lendrum Place drywall in context

About Lendrum Place

The area was named in honour of Robert Lendrum, one of Edmonton's early land surveyors.

What we see in Lendrum Place

In Lendrum Place the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Common framing situations in Lendrum Place in Edmonton

In Lendrum Place, lendrum Place sits in Edmonton's Scona district. The area was named in honour of Robert Lendrum, one of Edmonton's early land surveyors. Across roughly 770 homes here, the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We cover Lendrum Place and the surrounding Scona district, 7 days a week. Assessed on site, priced up front, and finished properly — every time.

Why Lendrum Place homeowners trust Emplastrum for framing in Edmonton

Framed by the people who finish it

As a drywall and finishing company first, we frame walls the way we want to board and tape them — square, plumb and consistent — because no amount of mud hides a crooked frame in Allendale, Argyll, Belgravia.

Fixed price, same-day reply

We cover Allendale, Argyll, Belgravia and Scona, 7 days a week. Free on-site quotes and fixed prices, and we stand behind the work.

Common framing situations in Lendrum Place in Edmonton

Leaving room for mechanical and electrical

Framing comes first, services follow

An Lendrum Place frame that leaves nowhere for a duct or a drain forces the mechanical trades to notch and drill in ways that weaken it.

Coordination

We would rather walk the layout with the other trades before framing than have them cut through a stud we set. It is a short conversation that avoids a structural argument later.

Door and window openings

Square, plumb and the right size

An opening framed even slightly out means the door will not hang properly, and no amount of shimming fully fixes a twisted opening.

What we check

Diagonals measured rather than eyeballed, and the rough opening sized to the actual door being installed rather than a standard assumed. Getting the real door dimensions before framing saves a return visit.

How it works

Simple, clean, on schedule — Framing in Lendrum Place Edmonton

Free quote

We come out to your Lendrum Place Edmonton property, take a real look at the framing, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every framing quote in Lendrum Place Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the framing in Lendrum Place Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Lendrum Place Edmonton home while we finish the framing to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished framing with us and you're happy with the result in Lendrum Place Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the framing contractor Lendrum Place Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your framing project in Lendrum Place Edmonton.

Read our reviews on Google

FAQ — Framing Lendrum Place Edmonton

Framing Lendrum Place Edmonton: your questions answered

Can you add backing for a TV mount and shelves?: Yes, and tell us before the wall closes. Adding backing while it is open takes minutes; finding it missing afterwards means opening the wall or relying on anchors that eventually pull out. We ask what is going on the walls first.
Can the same crew do the drywall after framing in Lendrum Place in Edmonton?: Yes — one crew frames, boards, tapes and finishes, so nothing gets lost in a handoff between trades.
Can the same crew do the drywall after framing in Lendrum Place in Edmonton?: Yes — one crew frames, boards, tapes and finishes, so nothing gets lost in a handoff between trades.
Do you frame basement developments in Lendrum Place?: Yes — wood-frame basement layouts ready for drywall are our most common framing job. We also cover Allendale, Argyll, Belgravia and Scona.
Do you build bulkheads around ducting in Lendrum Place?: Yes — bulkheads and soffits to box in ductwork, plumbing and lighting are part of nearly every basement frame.
Why does framing matter for the drywall finish in Edmonton?: Because the finish inherits the frame. A bowed stud or a wall out of plumb cannot be made flat with compound. Every problem left in the framing becomes a finishing problem and then a visible one.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Framing

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Framing Lendrum Place Edmonton

Framing in Lendrum Place, set out for the board that follows