Do you frame basement developments in Kensington?

Yes — wood-frame basement layouts ready for drywall are our most common framing job. We also cover Albany, Athlone, Baranow and Northwest.

Do you coordinate with my electrician and plumber?

Yes — we sequence the framing so your other trades can rough in cleanly before insulation and drywall.

Do you build bulkheads around ducting in Albany, Athlone, Baranow?

Yes — bulkheads and soffits to box in ductwork, plumbing and lighting are part of nearly every basement frame.

Can the same crew do the drywall after framing in Albany, Athlone, Baranow?

Yes — one crew frames, boards, tapes and finishes, so nothing gets lost in a handoff between trades.

Do you frame load-bearing walls?

No — we frame interior, non-load-bearing walls and bulkheads only. Anything structural needs a licensed structural engineer, and we will tell you when that is the case.

Do you frame basement developments in Albany, Athlone, Baranow?

Yes — wood-frame basement layouts ready for drywall are our most common framing job. We also cover Albany, Athlone, Baranow and Northwest.

Framing Kensington | Framing

Framing in Albany, Athlone, Baranow, square and ready for drywall

Turning an unfinished basement or an open floor plan into real rooms starts with the frame. In Kensington we build wood-frame basement development layouts and interior partition walls — squared, plumbed and spaced for the drywall going over them. We frame interior, non-load-bearing walls only; a licensed structural engineer handles anything load-bearing. Kensington is this established Northwest community where reno, repair and ceiling drywall are common, so framing calls here mix basement development with reno-driven partition changes. The same crew that frames can board, tape and finish too, so there is no handoff between trades. We cover Kensington, Albany, Athlone, Baranow and Northwest, 7 days a week.

Wood-frame basement development layouts in Kensington
Frame-to-finish: one crew frames, boards, tapes and finishes
Door rough openings framed to spec
Interior partition walls framed square and plumb
Kensington coverage — we come to you
Albany, Athlone, Baranow coverage — we come to you
Stud spacing matched to the drywall going over it

Common framing situations in Kensington

Basement layouts

An established Northwest community where reno, repair and ceiling drywall are common, so framing an unfinished basement into a usable layout is the call we hear most.

Partition changes

We also reframe and add partition walls in Kensington homes when a layout changes — closing an opening, splitting a room, or adding a closet or storage wall.

Kensington drywall in context

About Kensington

Kensington was annexed to the City in 1913 during a real estate boom but most development didn't occur until the 1950s.

What we see in Kensington

In Kensington the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Our Kensington framing process, step by step

Layout before lumber

We chalk the plate lines from the plan or your walk-through direction and confirm every wall location in your Kensington space before anything is cut.

Square, plumb, spaced right

We frame the walls square and plumb with stud spacing matched to the board going over them — the frame stage is where a wavy wall gets built or avoided. See our basement drywall work in Kensington for the stage that follows.

What affects the cost of framing in Kensington?

Wall length, layout and openings

Framing cost in Kensington tracks the total wall length, the complexity of the layout, and the number of openings and bulkheads. We price off a site walk-through and give a fixed number before we start.

Typical framing work in Kensington homes

Because Kensington is an older Northwest community where settling cracks, aging texture and the occasional plaster repair come up, framing here often means reworking walls that have shifted or been altered over the decades, alongside basement development.

Basement development framing in Albany, Athlone, Baranow

From open concrete to real rooms

A basement development layout is the most common framing job we do in Albany, Athlone, Baranow — bedrooms, a bathroom, a media room or a suite, framed to plan and ready for the trades that follow.

Interior and non-load-bearing only

We keep our framing to interior, non-load-bearing walls and bulkheads. Anything structural belongs with a licensed structural engineer — and we will tell you honestly when that is what your project needs.

Why Kensington homeowners trust Emplastrum for framing

Framed by the people who finish it

As a drywall and finishing company first, we frame walls the way we want to board and tape them — square, plumb and consistent — because no amount of mud hides a crooked frame in Kensington.

Fixed price, same-day reply

We cover Kensington, Albany, Athlone, Baranow and Northwest, 7 days a week. Free on-site quotes and fixed prices, and we stand behind the work.

What affects the cost of framing in Kensington?

Wall length, layout and openings

Typical framing work in Kensington homes

Because Kensington is this established Northwest community where reno, repair and ceiling drywall are common, framing calls here mix basement development with reno-driven partition changes.

How it works

Simple, clean, on schedule — Framing in Kensington

Free quote

We come out to your Kensington property, take a real look at the framing, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every framing quote in Kensington starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the framing in Kensington. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Kensington home while we finish the framing to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished framing with us and you're happy with the result in Kensington. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the framing contractor Kensington trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your framing project in Kensington.

Read our reviews on Google

FAQ — Framing Kensington

Framing Kensington: your questions answered

Do you frame basement developments in Kensington?: Yes — wood-frame basement layouts ready for drywall are our most common framing job. We also cover Albany, Athlone, Baranow and Northwest.
Do you coordinate with my electrician and plumber?: Yes — we sequence the framing so your other trades can rough in cleanly before insulation and drywall.
Do you build bulkheads around ducting in Albany, Athlone, Baranow?: Yes — bulkheads and soffits to box in ductwork, plumbing and lighting are part of nearly every basement frame.
Can the same crew do the drywall after framing in Albany, Athlone, Baranow?: Yes — one crew frames, boards, tapes and finishes, so nothing gets lost in a handoff between trades.
Do you frame load-bearing walls?: No — we frame interior, non-load-bearing walls and bulkheads only. Anything structural needs a licensed structural engineer, and we will tell you when that is the case.
Do you frame basement developments in Albany, Athlone, Baranow?: Yes — wood-frame basement layouts ready for drywall are our most common framing job. We also cover Albany, Athlone, Baranow and Northwest.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Framing Kensington

Framing in Albany, Athlone, Baranow, square and ready for drywall