What is crowning a stud?

Sighting each stud and setting them all with the bow facing the same way so the wall plane is consistent. Studs set randomly give a wall that waves, and in an Hodgson room with a window running along it that shows through the paint.

Why does framing matter for the drywall finish?

Because the finish inherits the frame. A bowed stud or a wall out of plumb cannot be made flat with compound. Every problem left in the framing becomes a finishing problem and then a visible one.

Can you take out this wall?

Only once we know it is not load-bearing, and that needs drawings or an engineer rather than an assumption. If it is bearing, the job becomes beams and posts — far better priced before demolition than discovered during it.

Do you build bulkheads around ducting in Hodgson?

Yes — bulkheads and soffits to box in ductwork, plumbing and lighting are part of nearly every basement frame.

Do you frame basement developments in Hodgson?

Yes — wood-frame basement layouts ready for drywall are our most common framing job. We also cover Aspen Gardens, Bearspaw, Blue Quill and Whitemud.

Do you frame basement developments in Hodgson?

Yes — wood-frame basement layouts ready for drywall are our most common framing job. We also cover Aspen Gardens, Bearspaw, Blue Quill and Whitemud.

Framing Hodgson Edmonton | Stud Walls

Framing in Hodgson, square and ready for drywall

Frame-to-finish: one crew frames, boards, tapes and finishes
Stud spacing matched to the drywall going over it
Bulkheads and soffits for ductwork and lighting
Wood-frame basement development layouts in Hodgson
Hodgson coverage — we come to you
Door rough openings framed to spec
Aspen Gardens, Bearspaw, Blue Quill coverage — we come to you

Steel studs against wood in a Hodgson basement

Different tools for different jobs

Steel is straight, will not warp, does not burn and does not rot, which suits a basement or a shop. Wood takes fasteners anywhere and is easier for backing and heavy fixings.

How we choose

Often a mix — steel for the long partition runs where straightness matters, wood where cabinets and heavy items are going. We will say which we would use where and why.

Hodgson drywall in context

About Hodgson

The Hodgson neighbourhood was named after John Hodgson (1888-1969) who was the city comptroller and financial commissioner for the City of Edmonton for nearly 40 years.

What we see in Hodgson

In Hodgson the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We confirm what your home actually needs on site, in writing, before anything starts.

Common framing situations in Hodgson in Edmonton

In Hodgson, hodgson sits in Edmonton's Whitemud district. The Hodgson neighbourhood was named after John Hodgson (1888-1969) who was the city comptroller and financial commissioner for the City of Edmonton for nearly 40 years. Across roughly 835 homes here, the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We cover Hodgson and the surrounding Whitemud district, 7 days a week. Same trusted team, same process on every job — on-site quote, fixed price, no surprises.

Backing for everything that gets fixed later

Decide before it closes

Grab bars, TV mounts, floating shelves, cabinets, handrails and towel rails all need something solid behind the board.

The cheap moment

Adding backing while the Hodgson wall is open takes minutes. Finding it missing after the wall is finished means opening it or relying on hollow-wall anchors that eventually pull out. We ask what is going on the walls before we close them.

Our Hodgson framing process in Edmonton, step by step

Layout before lumber

We chalk the plate lines from the plan or your walk-through direction and confirm every wall location in your Aspen Gardens, Bearspaw, Blue Quill space before anything is cut.

Square, plumb, spaced right

We frame the walls square and plumb with stud spacing matched to the board going over them — the frame stage is where a wavy wall gets built or avoided. See our basement drywall work in Aspen Gardens, Bearspaw, Blue Quill for the stage that follows.

Door and window openings

Square, plumb and the right size

An opening framed even slightly out means the door will not hang properly, and no amount of shimming fully fixes a twisted opening.

What we check

Diagonals measured rather than eyeballed, and the rough opening sized to the actual door being installed rather than a standard assumed. Getting the real door dimensions before framing saves a return visit.

What affects the cost of framing in Hodgson in Edmonton?

Wall length, layout and openings

Framing cost in Hodgson tracks the total wall length, the complexity of the layout, and the number of openings and bulkheads. We price off a site walk-through and give a fixed number before we start.

Typical framing work in Hodgson homes

Because Hodgson is a Whitemud community with a mix of older homes and newer builds, framing calls here range from clean basement layouts in the newer homes to alteration work in the older ones.

How it works

Simple, clean, on schedule — Framing in Hodgson Edmonton

Free quote

We come out to your Hodgson Edmonton property, take a real look at the framing, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every framing quote in Hodgson Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the framing in Hodgson Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Hodgson Edmonton home while we finish the framing to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished framing with us and you're happy with the result in Hodgson Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the framing contractor Hodgson Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your framing project in Hodgson Edmonton.

Read our reviews on Google

FAQ — Framing Hodgson Edmonton

Framing Hodgson Edmonton: your questions answered

What is crowning a stud?: Sighting each stud and setting them all with the bow facing the same way so the wall plane is consistent. Studs set randomly give a wall that waves, and in an Hodgson room with a window running along it that shows through the paint.
Why does framing matter for the drywall finish in Edmonton?: Because the finish inherits the frame. A bowed stud or a wall out of plumb cannot be made flat with compound. Every problem left in the framing becomes a finishing problem and then a visible one.
Can you take out this wall?: Only once we know it is not load-bearing, and that needs drawings or an engineer rather than an assumption. If it is bearing, the job becomes beams and posts — far better priced before demolition than discovered during it.
Do you build bulkheads around ducting in Hodgson?: Yes — bulkheads and soffits to box in ductwork, plumbing and lighting are part of nearly every basement frame.
Do you frame basement developments in Hodgson?: Yes — wood-frame basement layouts ready for drywall are our most common framing job. We also cover Aspen Gardens, Bearspaw, Blue Quill and Whitemud.
Do you frame basement developments in Hodgson?: Yes — wood-frame basement layouts ready for drywall are our most common framing job. We also cover Aspen Gardens, Bearspaw, Blue Quill and Whitemud.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Framing

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Framing Hodgson Edmonton

Framing in Hodgson, square and ready for drywall