Do you coordinate with my electrician and plumber?

Yes — we sequence the framing so your other trades can rough in cleanly before insulation and drywall.

Do you frame basement developments in Haddow?

Yes — wood-frame basement layouts ready for drywall are our most common framing job. We also cover Aspen Gardens, Bearspaw, Blue Quill and Whitemud.

Can you take out this wall?

Only once we know it is not load-bearing, and that needs drawings or an engineer rather than an assumption. If it is bearing, the job becomes beams and posts — far better priced before demolition than discovered during it.

Do you frame basement developments in Haddow?

Yes — wood-frame basement layouts ready for drywall are our most common framing job. We also cover Aspen Gardens, Bearspaw, Blue Quill and Whitemud.

Steel studs or wood in a basement?

Often a mix — steel for long partition runs where straightness matters, wood where cabinets and heavy fixings are going. Steel will not warp or rot; wood takes fasteners anywhere. We will say which we would use where.

Do you build bulkheads around ducting in Haddow?

Yes — bulkheads and soffits to box in ductwork, plumbing and lighting are part of nearly every basement frame.

Framing Haddow Edmonton | Stud Walls

Framing in Haddow, set out for the board that follows

Interior partition walls framed square and plumb
Wood-frame basement development layouts in Aspen Gardens, Bearspaw, Blue Quill
Haddow coverage — we come to you
Bulkheads and soffits for ductwork and lighting
Wood-frame basement development layouts in Haddow
Frame-to-finish: one crew frames, boards, tapes and finishes
Aspen Gardens, Bearspaw, Blue Quill coverage — we come to you

Steel studs against wood in a Haddow basement

Different tools for different jobs

Steel is straight, will not warp, does not burn and does not rot, which suits a basement or a shop. Wood takes fasteners anywhere and is easier for backing and heavy fixings.

How we choose

Often a mix — steel for the long partition runs where straightness matters, wood where cabinets and heavy items are going. We will say which we would use where and why.

Haddow drywall in context

About Haddow

The Haddow neighbourhood is named after Albert Walker ¿Bert¿ Haddow, who was Edmonton¿s city engineer for forty years.

What we see in Haddow

In Haddow the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We confirm what your home actually needs on site, in writing, before anything starts.

Layout for the sheet, not just for the room

Where the joints will land

Framing at the right spacing and adding backing where a sheet edge will fall means the board has something to fasten to at every joint.

Butt joints

An unsupported butt joint in an Haddow wall is the hardest thing in drywall to hide. Thinking about sheet layout at framing stage removes them, and it costs nothing but attention.

Load-bearing walls and where we stop

Not our decision to make

Removing or altering a wall that carries load is a structural question, and we do not take a homeowner's assurance that a wall is non-bearing.

What we need

Drawings or an engineer's assessment. If a wall in an Haddow renovation turns out to be bearing, the job becomes beams and posts — a different scope, and one far better priced before demolition than discovered during it.

Door and window openings

Square, plumb and the right size

An opening framed even slightly out means the door will not hang properly, and no amount of shimming fully fixes a twisted opening.

What we check

Diagonals measured rather than eyeballed, and the rough opening sized to the actual door being installed rather than a standard assumed. Getting the real door dimensions before framing saves a return visit.

Our Haddow framing process in Edmonton, step by step

Layout before lumber

We chalk the plate lines from the plan or your walk-through direction and confirm every wall location in your Aspen Gardens, Bearspaw, Blue Quill space before anything is cut.

Square, plumb, spaced right

We frame the walls square and plumb with stud spacing matched to the board going over them — the frame stage is where a wavy wall gets built or avoided. See our basement drywall work in Aspen Gardens, Bearspaw, Blue Quill for the stage that follows.

Basement framing against foundation walls in Edmonton

Hold it off the concrete

Framing tight against an Haddow foundation wall puts wood and insulation against a cold, sometimes damp surface with no way to dry.

How it is done

The wall is held off, or a rigid layer goes on the concrete first. It costs an inch or two of floor space and it is the difference between a basement that stays dry and one that smells musty in year two.

How it works

Simple, clean, on schedule — Framing in Haddow Edmonton

Free quote

We come out to your Haddow Edmonton property, take a real look at the framing, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every framing quote in Haddow Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the framing in Haddow Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Haddow Edmonton home while we finish the framing to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished framing with us and you're happy with the result in Haddow Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the framing contractor Haddow Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your framing project in Haddow Edmonton.

Read our reviews on Google

FAQ — Framing Haddow Edmonton

Framing Haddow Edmonton: your questions answered

Do you coordinate with my electrician and plumber?: Yes — we sequence the framing so your other trades can rough in cleanly before insulation and drywall.
Do you frame basement developments in Haddow?: Yes — wood-frame basement layouts ready for drywall are our most common framing job. We also cover Aspen Gardens, Bearspaw, Blue Quill and Whitemud.
Can you take out this wall?: Only once we know it is not load-bearing, and that needs drawings or an engineer rather than an assumption. If it is bearing, the job becomes beams and posts — far better priced before demolition than discovered during it.
Do you frame basement developments in Haddow?: Yes — wood-frame basement layouts ready for drywall are our most common framing job. We also cover Aspen Gardens, Bearspaw, Blue Quill and Whitemud.
Steel studs or wood in a basement?: Often a mix — steel for long partition runs where straightness matters, wood where cabinets and heavy fixings are going. Steel will not warp or rot; wood takes fasteners anywhere. We will say which we would use where.
Do you build bulkheads around ducting in Haddow?: Yes — bulkheads and soffits to box in ductwork, plumbing and lighting are part of nearly every basement frame.

Need Edmonton’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Edmonton →

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Framing

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Framing Haddow Edmonton

Framing in Haddow, set out for the board that follows